/*****************************************************************************
* x264.h: h264 encoder library
*****************************************************************************
- * Copyright (C) 2003 Laurent Aimar
- * $Id: x264.h,v 1.1 2004/06/03 19:24:12 fenrir Exp $
+ * Copyright (C) 2003-2008 x264 Project
*
* Authors: Laurent Aimar <fenrir@via.ecp.fr>
+ * Loren Merritt <lorenm@u.washington.edu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111, USA.
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02111, USA.
*****************************************************************************/
-#ifndef _X264_H
-#define _X264_H 1
+#ifndef X264_X264_H
+#define X264_X264_H
#if !defined(_STDINT_H) && !defined(_STDINT_H_) && \
!defined(_INTTYPES_H) && !defined(_INTTYPES_H_)
#include <stdarg.h>
-#define X264_BUILD 56
+#define X264_BUILD 84
/* x264_t:
* opaque handler for encoder */
****************************************************************************/
/* CPU flags
*/
-#define X264_CPU_MMX 0x000001 /* mmx */
-#define X264_CPU_MMXEXT 0x000002 /* mmx-ext*/
-#define X264_CPU_SSE 0x000004 /* sse */
-#define X264_CPU_SSE2 0x000008 /* sse 2 */
-#define X264_CPU_3DNOW 0x000010 /* 3dnow! */
-#define X264_CPU_3DNOWEXT 0x000020 /* 3dnow! ext */
-#define X264_CPU_ALTIVEC 0x000040 /* altivec */
-#define X264_CPU_SSE3 0x000080 /* sse 3 */
-#define X264_CPU_SSSE3 0x000100 /* ssse 3 */
+#define X264_CPU_CACHELINE_32 0x000001 /* avoid memory loads that span the border between two cachelines */
+#define X264_CPU_CACHELINE_64 0x000002 /* 32/64 is the size of a cacheline in bytes */
+#define X264_CPU_ALTIVEC 0x000004
+#define X264_CPU_MMX 0x000008
+#define X264_CPU_MMXEXT 0x000010 /* MMX2 aka MMXEXT aka ISSE */
+#define X264_CPU_SSE 0x000020
+#define X264_CPU_SSE2 0x000040
+#define X264_CPU_SSE2_IS_SLOW 0x000080 /* avoid most SSE2 functions on Athlon64 */
+#define X264_CPU_SSE2_IS_FAST 0x000100 /* a few functions are only faster on Core2 and Phenom */
+#define X264_CPU_SSE3 0x000200
+#define X264_CPU_SSSE3 0x000400
+#define X264_CPU_SHUFFLE_IS_FAST 0x000800 /* Penryn, Nehalem, and Phenom have fast shuffle units */
+#define X264_CPU_STACK_MOD4 0x001000 /* if stack is only mod4 and not mod16 */
+#define X264_CPU_SSE4 0x002000 /* SSE4.1 */
+#define X264_CPU_SSE42 0x004000 /* SSE4.2 */
+#define X264_CPU_SSE_MISALIGN 0x008000 /* Phenom support for misaligned SSE instruction arguments */
+#define X264_CPU_LZCNT 0x010000 /* Phenom support for "leading zero count" instruction. */
+#define X264_CPU_ARMV6 0x020000
+#define X264_CPU_NEON 0x040000 /* ARM NEON */
+#define X264_CPU_FAST_NEON_MRC 0x080000 /* Transfer from NEON to ARM register is fast (Cortex-A9) */
/* Analyse flags
*/
#define X264_ME_HEX 1
#define X264_ME_UMH 2
#define X264_ME_ESA 3
+#define X264_ME_TESA 4
#define X264_CQM_FLAT 0
#define X264_CQM_JVT 1
#define X264_CQM_CUSTOM 2
-#define X264_RC_NONE -1
#define X264_RC_CQP 0
#define X264_RC_CRF 1
#define X264_RC_ABR 2
+#define X264_AQ_NONE 0
+#define X264_AQ_VARIANCE 1
+#define X264_AQ_AUTOVARIANCE 2
+#define X264_B_ADAPT_NONE 0
+#define X264_B_ADAPT_FAST 1
+#define X264_B_ADAPT_TRELLIS 2
+#define X264_WEIGHTP_NONE 0
+#define X264_WEIGHTP_BLIND 1
+#define X264_WEIGHTP_SMART 2
+#define X264_B_PYRAMID_NONE 0
+#define X264_B_PYRAMID_STRICT 1
+#define X264_B_PYRAMID_NORMAL 2
static const char * const x264_direct_pred_names[] = { "none", "spatial", "temporal", "auto", 0 };
-static const char * const x264_motion_est_names[] = { "dia", "hex", "umh", "esa", 0 };
+static const char * const x264_motion_est_names[] = { "dia", "hex", "umh", "esa", "tesa", 0 };
+static const char * const x264_b_pyramid_names[] = { "none", "strict", "normal", 0 };
static const char * const x264_overscan_names[] = { "undef", "show", "crop", 0 };
static const char * const x264_vidformat_names[] = { "component", "pal", "ntsc", "secam", "mac", "undef", 0 };
static const char * const x264_fullrange_names[] = { "off", "on", 0 };
static const char * const x264_colmatrix_names[] = { "GBR", "bt709", "undef", "", "fcc", "bt470bg", "smpte170m", "smpte240m", "YCgCo", 0 };
/* Colorspace type
- */
+ * legacy only; nothing other than I420 is really supported. */
#define X264_CSP_MASK 0x00ff /* */
#define X264_CSP_NONE 0x0000 /* Invalid mode */
#define X264_CSP_I420 0x0001 /* yuv 4:2:0 planar */
#define X264_CSP_MAX 0x0009 /* end of list */
#define X264_CSP_VFLIP 0x1000 /* */
-/* Slice type
- */
+/* Slice type */
#define X264_TYPE_AUTO 0x0000 /* Let x264 choose the right type */
#define X264_TYPE_IDR 0x0001
#define X264_TYPE_I 0x0002
#define IS_X264_TYPE_I(x) ((x)==X264_TYPE_I || (x)==X264_TYPE_IDR)
#define IS_X264_TYPE_B(x) ((x)==X264_TYPE_B || (x)==X264_TYPE_BREF)
-/* Log level
- */
+/* Log level */
#define X264_LOG_NONE (-1)
#define X264_LOG_ERROR 0
#define X264_LOG_WARNING 1
#define X264_LOG_INFO 2
#define X264_LOG_DEBUG 3
+/* Threading */
+#define X264_THREADS_AUTO 0 /* Automatically select optimal number of threads */
+#define X264_SYNC_LOOKAHEAD_AUTO (-1) /* Automatically select optimal lookahead thread buffer size */
+
/* Zones: override ratecontrol or other options for specific sections of the video.
* See x264_encoder_reconfig() for which options can be changed.
* If zones overlap, whichever comes later in the list takes precedence. */
/* CPU flags */
unsigned int cpu;
int i_threads; /* encode multiple frames in parallel */
+ int b_sliced_threads; /* Whether to use slice-based threading. */
int b_deterministic; /* whether to allow non-deterministic optimizations when threaded */
+ int i_sync_lookahead; /* threaded lookahead buffer */
/* Video Properties */
int i_width;
int i_height;
int i_csp; /* CSP of encoded bitstream, only i420 supported */
- int i_level_idc;
+ int i_level_idc;
int i_frame_total; /* number of frames to encode if known, else 0 */
struct
int i_sar_width;
int i_overscan; /* 0=undef, 1=no overscan, 2=overscan */
-
+
/* see h264 annex E for the values of the following */
int i_vidformat;
int b_fullrange;
int i_keyint_max; /* Force an IDR keyframe at this interval */
int i_keyint_min; /* Scenecuts closer together than this are coded as I, not IDR. */
int i_scenecut_threshold; /* how aggressively to insert extra I frames */
- int b_pre_scenecut; /* compute scenecut on lowres frames */
+ int b_intra_refresh; /* Whether or not to use periodic intra refresh instead of IDR frames. */
+
int i_bframe; /* how many b-frame between 2 references pictures */
- int b_bframe_adaptive;
+ int i_bframe_adaptive;
int i_bframe_bias;
- int b_bframe_pyramid; /* Keep some B-frames as references */
+ int i_bframe_pyramid; /* Keep some B-frames as references: 0=off, 1=strict hierarchical, 2=normal */
int b_deblocking_filter;
int i_deblocking_filter_alphac0; /* [-6, 6] -6 light filter, 6 strong */
int i_cabac_init_idc;
int b_interlaced;
+ int b_constrained_intra;
int i_cqm_preset;
char *psz_cqm_file; /* JM format */
void *p_log_private;
int i_log_level;
int b_visualize;
+ char *psz_dump_yuv; /* filename for reconstructed frames */
/* Encoder analyser parameters */
struct
unsigned int inter; /* inter partitions */
int b_transform_8x8;
+ int i_weighted_pred; /* weighting for P-frames */
int b_weighted_bipred; /* implicit weighting for B-frames */
int i_direct_mv_pred; /* spatial vs temporal mv prediction */
- int i_direct_8x8_inference; /* forbid 4x4 direct partitions. -1 = auto, based on level */
int i_chroma_qp_offset;
int i_me_method; /* motion estimation algorithm to use (X264_ME_*) */
int i_mv_range; /* maximum length of a mv (in pixels). -1 = auto, based on level */
int i_mv_range_thread; /* minimum space between threads. -1 = auto, based on number of threads. */
int i_subpel_refine; /* subpixel motion estimation quality */
- int b_bidir_me; /* jointly optimize both MVs in B-frames */
int b_chroma_me; /* chroma ME for subpel and mode decision in P-frames */
- int b_bframe_rdo; /* RD based mode decision for B-frames */
int b_mixed_references; /* allow each mb partition in P-frames to have it's own reference number */
int i_trellis; /* trellis RD quantization */
int b_fast_pskip; /* early SKIP detection on P-frames */
int b_dct_decimate; /* transform coefficient thresholding on P-frames */
int i_noise_reduction; /* adaptive pseudo-deadzone */
+ float f_psy_rd; /* Psy RD strength */
+ float f_psy_trellis; /* Psy trellis strength */
+ int b_psy; /* Toggle all psy optimizations */
/* the deadzone size that will be used in luma quantization */
int i_luma_deadzone[2]; /* {inter, intra} */
float f_rate_tolerance;
int i_vbv_max_bitrate;
int i_vbv_buffer_size;
- float f_vbv_buffer_init;
+ float f_vbv_buffer_init; /* <=1: fraction of buffer_size. >1: kbit */
float f_ip_factor;
float f_pb_factor;
+ int i_aq_mode; /* psy adaptive QP. (X264_AQ_*) */
+ float f_aq_strength;
+ int b_mb_tree; /* Macroblock-tree ratecontrol. */
+ int i_lookahead;
+
/* 2pass */
int b_stat_write; /* Enable stat writing in psz_stat_out */
char *psz_stat_out;
char *psz_stat_in;
/* 2pass params (same as ffmpeg ones) */
- char *psz_rc_eq; /* 2 pass rate control equation */
float f_qcompress; /* 0.0 => cbr, 1.0 => constant qp */
float f_qblur; /* temporally blur quants */
float f_complexity_blur; /* temporally blur complexity */
/* Muxing parameters */
int b_aud; /* generate access unit delimiters */
int b_repeat_headers; /* put SPS/PPS before each keyframe */
+ int b_annexb; /* if set, place start codes (4 bytes) before NAL units,
+ * otherwise place size (4 bytes) before NAL units. */
int i_sps_id; /* SPS and PPS id number */
+ int b_vfr_input; /* VFR input */
+ int i_timebase_num; /* Timebase numerator */
+ int i_timebase_den; /* Timebase denominator */
+ int b_dts_compress; /* DTS compression: this algorithm eliminates negative DTS
+ * by compressing them to be less than the second PTS.
+ * Warning: this will change the timebase! */
+
+ /* Slicing parameters */
+ int i_slice_max_size; /* Max size per slice in bytes; includes estimated NAL overhead. */
+ int i_slice_max_mbs; /* Max number of MBs per slice; overrides i_slice_count. */
+ int i_slice_count; /* Number of slices per frame: forces rectangular slices. */
+
+ /* Optional callback for freeing this x264_param_t when it is done being used.
+ * Only used when the x264_param_t sits in memory for an indefinite period of time,
+ * i.e. when an x264_param_t is passed to x264_t in an x264_picture_t or in zones.
+ * Not used when x264_encoder_reconfig is called directly. */
+ void (*param_free)( void* );
} x264_param_t;
typedef struct {
typedef struct
{
- /* In: force picture type (if not auto) XXX: ignored for now
+ /* In: force picture type (if not auto)
+ * If x264 encoding parameters are violated in the forcing of picture types,
+ * x264 will correct the input picture type and log a warning.
+ * The quality of frametype decisions may suffer if a great deal of fine-grained
+ * mixing of auto and forced frametypes is done.
* Out: type of the picture encoded */
int i_type;
/* In: force quantizer for > 0 */
int i_qpplus1;
+ /* Out: whether this frame is a keyframe. Important when using modes that result in
+ * SEI recovery points being used instead of IDR frames. */
+ int b_keyframe;
/* In: user pts, Out: pts of encoded picture (user)*/
int64_t i_pts;
-
+ /* Out: frame dts. Since the pts of the first frame is always zero,
+ * initial frames may have a negative dts which must be dealt with by any muxer */
+ int64_t i_dts;
+ /* In: custom encoding parameters to be set from this frame forwards
+ (in coded order, not display order). If NULL, continue using
+ parameters from the previous frame. Some parameters, such as
+ aspect ratio, can only be changed per-GOP due to the limitations
+ of H.264 itself; in this case, the caller must force an IDR frame
+ if it needs the changed parameter to apply immediately. */
+ x264_param_t *param;
/* In: raw data */
x264_image_t img;
+ /* private user data. libx264 doesn't touch this,
+ not even copy it from input to output frames. */
+ void *opaque;
} x264_picture_t;
/* x264_picture_alloc:
- * alloc data for a picture. You must call x264_picture_clean on it. */
-void x264_picture_alloc( x264_picture_t *pic, int i_csp, int i_width, int i_height );
+ * alloc data for a picture. You must call x264_picture_clean on it.
+ * returns 0 on success, or -1 on malloc failure. */
+int x264_picture_alloc( x264_picture_t *pic, int i_csp, int i_width, int i_height );
/* x264_picture_clean:
* free associated resource for a x264_picture_t allocated with
NAL_PRIORITY_HIGHEST = 3,
};
+/* The data within the payload is already NAL-encapsulated; the ref_idc and type
+ * are merely in the struct for easy access by the calling application.
+ * All data returned in an x264_nal_t, including the data in p_payload, is no longer
+ * valid after the next call to x264_encoder_encode. Thus it must be used or copied
+ * before calling x264_encoder_encode or x264_encoder_headers again. */
typedef struct
{
int i_ref_idc; /* nal_priority_e */
int i_type; /* nal_unit_type_e */
- /* This data are raw payload */
+ /* Size of payload in bytes. */
int i_payload;
+ /* If param->b_annexb is set, Annex-B bytestream with 4-byte startcode.
+ * Otherwise, startcode is replaced with a 4-byte size.
+ * This size is the size used in mp4/similar muxing; it is equal to i_payload-4 */
uint8_t *p_payload;
} x264_nal_t;
-/* x264_nal_encode:
- * encode a nal into a buffer, setting the size.
- * if b_annexeb then a long synch work is added
- * XXX: it currently doesn't check for overflow */
-int x264_nal_encode( void *, int *, int b_annexeb, x264_nal_t *nal );
-
-/* x264_nal_decode:
- * decode a buffer nal into a x264_nal_t */
-int x264_nal_decode( x264_nal_t *nal, void *, int );
-
/****************************************************************************
* Encoder functions:
****************************************************************************/
+/* Force a link error in the case of linking against an incompatible API version.
+ * Glue #defines exist to force correct macro expansion; the final output of the macro
+ * is x264_encoder_open_##X264_BUILD (for purposes of dlopen). */
+#define x264_encoder_glue1(x,y) x##y
+#define x264_encoder_glue2(x,y) x264_encoder_glue1(x,y)
+#define x264_encoder_open x264_encoder_glue2(x264_encoder_open_,X264_BUILD)
+
/* x264_encoder_open:
* create a new encoder handler, all parameters from x264_param_t are copied */
-x264_t *x264_encoder_open ( x264_param_t * );
+x264_t *x264_encoder_open( x264_param_t * );
+
/* x264_encoder_reconfig:
- * change encoder options while encoding,
- * analysis-related parameters from x264_param_t are copied */
+ * analysis-related parameters from x264_param_t are copied.
+ * this takes effect immediately, on whichever frame is encoded next;
+ * due to delay, this may not be the next frame passed to encoder_encode.
+ * if the change should apply to some particular frame, use x264_picture_t->param instead.
+ * returns 0 on success, negative on parameter validation error. */
int x264_encoder_reconfig( x264_t *, x264_param_t * );
+/* x264_encoder_parameters:
+ * copies the current internal set of parameters to the pointer provided
+ * by the caller. useful when the calling application needs to know
+ * how x264_encoder_open has changed the parameters, or the current state
+ * of the encoder after multiple x264_encoder_reconfig calls.
+ * note that the data accessible through pointers in the returned param struct
+ * (e.g. filenames) should not be modified by the calling application. */
+void x264_encoder_parameters( x264_t *, x264_param_t * );
/* x264_encoder_headers:
- * return the SPS and PPS that will be used for the whole stream */
+ * return the SPS and PPS that will be used for the whole stream.
+ * if i_nal > 0, returns the total size of all NAL payloads.
+ * returns negative on error.
+ * the payloads of all output NALs are guaranteed to be sequential in memory. */
int x264_encoder_headers( x264_t *, x264_nal_t **, int * );
/* x264_encoder_encode:
- * encode one picture */
+ * encode one picture.
+ * if i_nal > 0, returns the total size of all NAL payloads.
+ * returns negative on error, zero if no NAL units returned.
+ * the payloads of all output NALs are guaranteed to be sequential in memory. */
int x264_encoder_encode ( x264_t *, x264_nal_t **, int *, x264_picture_t *, x264_picture_t * );
/* x264_encoder_close:
* close an encoder handler */
void x264_encoder_close ( x264_t * );
+/* x264_encoder_delayed_frames:
+ * return the number of currently delayed (buffered) frames
+ * this should be used at the end of the stream, to know when you have all the encoded frames. */
+int x264_encoder_delayed_frames( x264_t * );
#endif
projects / x264 / blobdiff