*
* The images that make up an OSD menu can be created in such away that
* they contain all buttons in the same picture, with the selected one
- * highlighted or being a concatenation of all the seperate images. The
+ * highlighted or being a concatenation of all the separate images. The
* first case is the default.
*
* To change the default style the keyword 'style' should be set to 'concat'.
#define ENC_CODINGMODE "coding-mode"
#define ENC_CODINGMODE_TEXT N_("Picture coding mode")
#define ENC_CODINGMODE_LONGTEXT N_("Field coding is where interlaced fields are coded" \
- " seperately as opposed to a pseudo-progressive frame")
+ " separately as opposed to a pseudo-progressive frame")
static const char *const enc_codingmode_list[] =
{ "auto", "progressive", "field" };
static const char *const enc_codingmode_list_text[] =
{ N_("auto - let encoder decide based upon input (Best)"),
N_("force coding frame as single picture"),
- N_("force coding frame as seperate interlaced fields"),
+ N_("force coding frame as separate interlaced fields"),
};
#define ENC_MCBLK_WIDTH "mc-blk-width"
/* chroma_format_idc */
const int i_chroma_format_idc = bs_read_ue( &s );
if( i_chroma_format_idc == 3 )
- bs_skip( &s, 1 ); /* seperate_colour_plane_flag */
+ bs_skip( &s, 1 ); /* separate_colour_plane_flag */
/* bit_depth_luma_minus8 */
bs_read_ue( &s );
/* bit_depth_chroma_minus8 */
/*
- * DmxTools.cpp: functions to convert , or ; seperatered numbers into an integer array
+ * DmxTools.cpp: functions to convert , or ; separated numbers into an integer array
*
* See the README.txt file for copyright information and how to reach the author(s).
*
/*
-* DmxTools.h: functions to convert , or ; seperatered numbers into an integer array
+* DmxTools.h: functions to convert , or ; separated numbers into an integer array
*
* See the README.txt file for copyright information and how to reach the author(s).
*
"Serial Device / Port":\r
The COM-Port you are using for the hardware. E.G.: COM6 (This setting must be done if you are using a device\r
other than "AtmoWin Software") \r
-in the case of the device "Quattro AtmoLight" you may specify up to four ports/devices seperated by\r
+in the case of the device "Quattro AtmoLight" you may specify up to four ports/devices separated by\r
, or ; for example if you are useing two physical devices write\r
COM6;COM7 or on linux /dev/ttyUSB1;/dev/ttyUSB2\r
\r
\r
- Quattro AtmoLight - is nothing else as that you have connected up to 4 "classic AtmoLight" devices\r
to your computer creating a up 16 channel Atmo Light - each devices needs its own serial port.\r
- you have to write the ports seperated by , or ; to [Serial Port/device] f.e. COM3,COM4,COM5 or on \r
+ you have to write the ports separated by , or ; to [Serial Port/device] f.e. COM3,COM4,COM5 or on \r
Linux /dev/ttyUSB01,/dev/ttyUSB02,/dev/ttyUSB03\r
\r
- DMX - stands for a simple DMX controller which can control up to 255 DMX devices (lights)\r
"emulated with that DMX device")
#define DMX_CHBASE_TEXT N_("DMX address for each channel")
#define DMX_CHBASE_LONGTEXT N_("Define here the DMX base address for each " \
- "channel use , or ; to seperate the values")
+ "channel use , or ; to separate the values")
#define MOMO_CHANNELS_TEXT N_("Count of channels")
#define MOMO_CHANNELS_LONGTEXT N_("Depending on your MoMoLight hardware " \
#define CHANNELS_ASSIGN_TEXT N_("Channel / Zone Assignment")
#define CHANNELS_ASSIGN_LONGTEXT N_("for devices with more than five " \
"channels / zones write down here for each channel " \
- "the zone number to show and seperate the values with " \
+ "the zone number to show and separate the values with " \
", or ; and use -1 to not use some channels. For the " \
"classic AtmoLight the sequence 4,3,1,0,2 would set the " \
"default channel/zone mapping. " \