int linesize[AV_NUM_DATA_POINTERS];
/**
- * pointer to the first allocated byte of the picture. Can be used in get_buffer/release_buffer.
- * This isn't used by libavcodec unless the default get/release_buffer() is used.
- * - encoding:
- * - decoding:
+ * pointers to the data planes/channels.
+ *
+ * For video, this should simply point to data[].
+ *
+ * For planar audio, each channel has a separate data pointer, and
+ * linesize[0] contains the size of each channel buffer.
+ * For packed audio, there is just one data pointer, and linesize[0]
+ * contains the total size of the buffer for all channels.
+ *
+ * Note: Both data and extended_data will always be set by get_buffer(),
+ * but for planar audio with more channels that can fit in data,
+ * extended_data must be used by the decoder in order to access all
+ * channels.
+ *
+ * encoding: unused
+ * decoding: set by AVCodecContext.get_buffer()
*/
- uint8_t *base[AV_NUM_DATA_POINTERS];
+ uint8_t **extended_data;
+
+ /**
+ * width and height of the video frame
+ * - encoding: unused
+ * - decoding: Read by user.
+ */
+ int width, height;
+
+ /**
+ * number of audio samples (per channel) described by this frame
+ * - encoding: Set by user
+ * - decoding: Set by libavcodec
+ */
+ int nb_samples;
+
+ /**
+ * format of the frame, -1 if unknown or unset
+ * Values correspond to enum PixelFormat for video frames,
+ * enum AVSampleFormat for audio)
+ * - encoding: unused
+ * - decoding: Read by user.
+ */
+ int format;
+
/**
* 1 -> keyframe, 0-> not
* - encoding: Set by libavcodec.
*/
enum AVPictureType pict_type;
+ /**
+ * pointer to the first allocated byte of the picture. Can be used in get_buffer/release_buffer.
+ * This isn't used by libavcodec unless the default get/release_buffer() is used.
+ * - encoding:
+ * - decoding:
+ */
+ uint8_t *base[AV_NUM_DATA_POINTERS];
+
+ /**
+ * sample aspect ratio for the video frame, 0/1 if unknown\unspecified
+ * - encoding: unused
+ * - decoding: Read by user.
+ */
+ AVRational sample_aspect_ratio;
+
/**
* presentation timestamp in time_base units (time when frame should be shown to user)
* If AV_NOPTS_VALUE then frame_rate = 1/time_base will be assumed.
*/
int64_t pts;
+ /**
+ * reordered pts from the last AVPacket that has been input into the decoder
+ * - encoding: unused
+ * - decoding: Read by user.
+ */
+ int64_t pkt_pts;
+
+ /**
+ * dts from the last AVPacket that has been input into the decoder
+ * - encoding: unused
+ * - decoding: Read by user.
+ */
+ int64_t pkt_dts;
+
/**
* picture number in bitstream order
* - encoding: set by
*/
int qstride;
+ /**
+ *
+ */
+ int qscale_type;
+
/**
* mbskip_table[mb]>=1 if MB didn't change
* stride= mb_width = (width+15)>>4
uint32_t *mb_type;
/**
- * log2 of the size of the block which a single vector in motion_val represents:
- * (4->16x16, 3->8x8, 2-> 4x4, 1-> 2x2)
+ * DCT coefficients
* - encoding: unused
* - decoding: Set by libavcodec.
*/
- uint8_t motion_subsample_log2;
+ short *dct_coeff;
+
+ /**
+ * motion reference frame index
+ * the order in which these are stored can depend on the codec.
+ * - encoding: Set by user.
+ * - decoding: Set by libavcodec.
+ */
+ int8_t *ref_index[2];
/**
* for some private data of the user
*/
int repeat_pict;
- /**
- *
- */
- int qscale_type;
-
/**
* The content of the picture is interlaced.
* - encoding: Set by user.
*/
int top_field_first;
- /**
- * Pan scan.
- * - encoding: Set by user.
- * - decoding: Set by libavcodec.
- */
- AVPanScan *pan_scan;
-
/**
* Tell user application that palette has changed from previous frame.
* - encoding: ??? (no palette-enabled encoder yet)
int buffer_hints;
/**
- * DCT coefficients
- * - encoding: unused
- * - decoding: Set by libavcodec.
- */
- short *dct_coeff;
-
- /**
- * motion reference frame index
- * the order in which these are stored can depend on the codec.
+ * Pan scan.
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
- int8_t *ref_index[2];
+ AVPanScan *pan_scan;
/**
* reordered opaque 64bit (generally an integer or a double precision float
*/
void *hwaccel_picture_private;
- /**
- * reordered pts from the last AVPacket that has been input into the decoder
- * - encoding: unused
- * - decoding: Read by user.
- */
- int64_t pkt_pts;
-
- /**
- * dts from the last AVPacket that has been input into the decoder
- * - encoding: unused
- * - decoding: Read by user.
- */
- int64_t pkt_dts;
-
/**
* the AVCodecContext which ff_thread_get_buffer() was last called on
* - encoding: Set by libavcodec.
void *thread_opaque;
/**
- * number of audio samples (per channel) described by this frame
- * - encoding: Set by user
- * - decoding: Set by libavcodec
- */
- int nb_samples;
-
- /**
- * pointers to the data planes/channels.
- *
- * For video, this should simply point to data[].
- *
- * For planar audio, each channel has a separate data pointer, and
- * linesize[0] contains the size of each channel buffer.
- * For packed audio, there is just one data pointer, and linesize[0]
- * contains the total size of the buffer for all channels.
- *
- * Note: Both data and extended_data will always be set by get_buffer(),
- * but for planar audio with more channels that can fit in data,
- * extended_data must be used by the decoder in order to access all
- * channels.
- *
- * encoding: unused
- * decoding: set by AVCodecContext.get_buffer()
- */
- uint8_t **extended_data;
-
- /**
- * sample aspect ratio for the video frame, 0/1 if unknown\unspecified
- * - encoding: unused
- * - decoding: Read by user.
- */
- AVRational sample_aspect_ratio;
-
- /**
- * width and height of the video frame
- * - encoding: unused
- * - decoding: Read by user.
- */
- int width, height;
-
- /**
- * format of the frame, -1 if unknown or unset
- * Values correspond to enum PixelFormat for video frames,
- * enum AVSampleFormat for audio)
+ * log2 of the size of the block which a single vector in motion_val represents:
+ * (4->16x16, 3->8x8, 2-> 4x4, 1-> 2x2)
* - encoding: unused
- * - decoding: Read by user.
+ * - decoding: Set by libavcodec.
*/
- int format;
+ uint8_t motion_subsample_log2;
} AVFrame;
struct AVCodecInternal;