lavc: Move prediction_method to codec private options
This options is only used by huffyuv, ffvhuv, jpegls, mjpeg,
mpegvideoenc, png, utvideo.
It is a very codec-specific options, so deprecate the global variant.
Set proper limits to the maximum allowed values, and update utvideoenc
tests to use the new option name.
These options are only used by mpegvideoenc and vpx.
They are very codec-specific options, so deprecate the global variants.
Add an allowed value to the private options for frame_skip_cmp which
seems to have been forgotten, but perfectly working.
The libvpx frame dropping feature uses one of such option
(frame_skip_threshold) without the other three. For this reason rename
the option to something more consistent with the other libvpx variables.
This option is only used by mpegvideoenc,
It is a very codec-specific option, so deprecate the global variant.
Set proper limits to the maximum allowed values.
Updates libkvazaar to pass the exact frame rate to Kvazaar by setting
the numerator and denominator separately instead of a single floating
point number. The exact frame rate is needed for writing timing info to
the bitstream.
Martin Storsjö [Tue, 19 Jan 2016 08:04:32 +0000 (10:04 +0200)]
flvdec: Add sanity checking of the last packet size
For http, this avoids spurious warnings about failed requests (e.g.
HTTP error 416 Requested Range Not Satisfiable), if the last packet
is truncated and the size read is bogus.
When loading a truncated flv file, it would previously try to do a seek to
the end of every packet read. For some input protocols (such as http), such
repeated seek attempts are cripple the reading performance.
dca: fix misaligned access in ff_dca_convert_bitstream
The function is used on unaligned buffers (such as those provided
by AVPacket), accessing them as uint16_t causes SIGBUS crashes on
architectures like SPARC.
This fixes ubsan runtime error: load of misaligned address for type
'const uint16_t', which requires 2 byte alignment
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com> Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
This is used to check if the input buffer is larger enough, so if this
overflows it can cause a false negative leading to a segmentation fault
in bytestream2_get_bufferu.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com> Signed-off-by: Anton Khirnov <anton@khirnov.net>
Anton Khirnov [Fri, 8 Jan 2016 16:08:39 +0000 (17:08 +0100)]
nvenc: generate dts properly
When there is a non-zero decoding delay due to reordering, the first dts
should be lower than the first pts (since the first packet fed to the
decoder does not produce any output).
Use the same scheme used in mpegvideo_enc (which comes from x264
originally) -- wait for first two timestamps and extrapolate linearly to
the past to produce the first dts value.
Anton Khirnov [Fri, 8 Jan 2016 14:59:41 +0000 (15:59 +0100)]
nvenc: fix encoding with B-frames
When B-frames are enabled and the encoder returns success, all currently
pending buffers immediately become valid and can be returned to the
caller. We can only return one packet at a time, so all the other
pending buffers should be transferred to a new 'ready' fifo, from where
they can be returned in subsequent calls (in which the encoder does not
produce any new output). This bug was hidden by the incorrect testing of
the encoder return value (the return value was overwritten before it was
tested).
Martin Storsjö [Wed, 30 Dec 2015 21:46:06 +0000 (23:46 +0200)]
checkasm: Check register clobbering on arm
Use two separate functions, depending on whether VFP/NEON is available.
This is set to require armv5te - it uses blx, which is only available
since armv5t, but we don't have a separate configure item for that.
(It also uses ldrd, which requires armv5te, but this could be avoided
if necessary.)
asfdec: reject size > INT64_MAX in asf_read_unknown
Both avio_skip and detect_unknown_subobject use int64_t for the size
parameter.
This fixes a segmentation fault due to infinite recursion.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com> Signed-off-by: Alexandra Hájková <alexandra.khirnova@gmail.com> Signed-off-by: Anton Khirnov <anton@khirnov.net>
asfdec: only set asf_pkt->data_size after sanity checks
Otherwise invalid values are used unchecked in the next run.
This can cause NULL pointer dereferencing.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com> Signed-off-by: Alexandra Hájková <alexandra.khirnova@gmail.com> Signed-off-by: Anton Khirnov <anton@khirnov.net>
Anton Khirnov [Thu, 17 Dec 2015 18:38:24 +0000 (19:38 +0100)]
h264: improve behaviour with invalid reference lists
Before 741b494fa8cd28a7d096349bac183893c236e3f9, when the reference list
modification description was invalid, the code would substitute the
corresponding reference from the initial ("default") reference list.
After that commit, it will just return an error.
Since there are apparently invalid samples in the wild that used to play
fine with the old code, it is a good idea to re-add some sort of error
resilience here. So, when the reference list modification results in a
missing frame, substitute a previous reference frame for it. The
relevant sample again decodes fine with the same output as previously.
Janne Grunau [Tue, 29 Dec 2015 11:08:38 +0000 (12:08 +0100)]
x86: use emms after ff_int32_to_float_fmul_scalar_sse
Intel's Instruction Set Reference (as of September 2015) clearly states
that cvtpi2ps switches to MMX state. Actual CPUs do not switch if the
source is a memory location. The Instruction Set Reference from 1999
(Order Number 243191) describes this behaviour but all later versions
I've seen have make no distinction whether MMX registers or memory is
used as source.
The documentation for the matching SSE2 instruction to convert to double
(cvtpi2pd) was fixed (see the valgrind bug
https://bugs.kde.org/show_bug.cgi?id=210264).
It will take time to get a clarification and fixes in place. In the
meantime it makes sense to change ff_int32_to_float_fmul_scalar_sse to
be correct according to the documentation. The vast majority of users
will have SSE2 so a change to the SSE version has little effect.
Fixes fate-checkasm on x86 valgrind targets.
Valgrind 'bug' reported as https://bugs.kde.org/show_bug.cgi?id=357059
Janne Grunau [Tue, 22 Dec 2015 21:51:55 +0000 (22:51 +0100)]
checkasm: x86: post commit review fixes
Check the full FPU tag word instead of only the lower half and simplify
the comparison.
Use upper-case function base name as macro name to instantiate both
checked_call variants.
dca: change the core to work with integer coefficients.
The DCA core decoder converts integer coefficients read from the
bitstream to floats just after reading them (along with dequantization).
All the other steps of the audio reconstruction are done with floats
which makes the output for the DTS lossless extension (XLL)
actually lossy.
This patch changes the DCA core to work with integer coefficients
until QMF. At this point the integer coefficients are converted to floats.
The coefficients for the LFE channel (lfe_data) are not touched.
This is the first step for the really lossless XLL decoding.
Janne Grunau [Fri, 11 Dec 2015 13:06:38 +0000 (14:06 +0100)]
x86: checkasm: check for or handle missing cleanup after MMX instructions
Not every asm routine is expected clear the MMX state after returning.
It is however a requisite for testing floating point code in checkasm.
Annotate functions requiring cleanup with declare_func_emms() and issue
emms after the call. The remaining functions are checked for having a
cleared MMX state after return.
opus: Fix typo causing overflow in silk_stabilize_lsf
Due to this typo max_center can be too large, causing nlsf to be set to
too large values, which in turn can cause nlsf[i - 1] + min_delta[i] to
overflow to a negative value, which is not allowed for nlsf and can
cause an out of bounds read in silk_lsf2lpc.
Signed-off-by: Andreas Cadhalpun <Andreas.Cadhalpun@googlemail.com> Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Janne Grunau [Thu, 3 Dec 2015 15:17:32 +0000 (16:17 +0100)]
arm: add ff_int32_to_float_fmul_array8_neon
Quite a bit faster than int32_to_float_fmul_array8_c calling
ff_int32_to_float_fmul_scalar_neon through FmtConvertContext.
Number of cycles per int32_to_float_fmul_array8 call while decoding
padded.dts on exynos5422:
before after change
cortex-a7: 1270 951 -25%
cortex-a15: 434 285 -34%
Interesting are the differences between
int32_to_float_fmul_array8_neon_c and int32_to_float_fmul_array8_neon.
The former is current behaviour of calling
ff_int32_to_float_fmul_scalar_neon repeatedly from the c function,
The raw numbers differ since checkasm uses different lengths than the
dca decoder.
Janne Grunau [Wed, 9 Dec 2015 21:28:36 +0000 (22:28 +0100)]
arm: add a cpu flag for the VFPv2 vector mode
The vector mode was deprecated in ARMv7-A/VFPv3 and various cpu
implementations do not support it in hardware. Vector mode code will
depending the OS either be emulated in software or result in an illegal
instruction on cpus which does not support it. This was not really
problem in practice since NEON implementations of the same functions are
preferred. It will however become a problem for checkasm which tests
every cpu flag separately.
Since this is a cpu feature newer cpu do not support anymore the
behaviour of this flag differs from the other flags. It can be only
activated by runtime cpu feature selection.
Janne Grunau [Wed, 2 Dec 2015 23:12:39 +0000 (00:12 +0100)]
arm64: add cycle counter support
The ISB (instruction synchronization barrier) might be too heavy for
START/STOPTIMER use but should be more accurate in checkasm where the
timing overhead is subtracted.
Janne Grunau [Thu, 10 Dec 2015 20:49:30 +0000 (21:49 +0100)]
libavutil: move FFALIGN macro from common.h to macros.h
Include macros.h explicitly in common.h so that external code using
FFALIGN does not break. It was already implicitly included through
version.h. Include macros.h in lls.h and internal.h for FFALIGN.
lls.h was including common.h only for FFALIGN and internal.h was
missing the include for FFALIGN. `make checkheaders` did not catch it
because it's an internal header.
Stefan Pöschel [Sat, 12 Dec 2015 19:26:38 +0000 (20:26 +0100)]
mpegtsenc: add flag to embed an AC-3 ES the DVB way
So far an AC-3 elementary stream is refered to in the PMT according to
System A (ATSC). However System B (DVB) has a different way to signal an AC-3
ES within the PMT. This different way can be enabled by a new flag. The flag is
more generally named 'system_b' as there are further differences between ATSC
and DVB (e.g. the signalling of E-AC-3) which should then also be covered by it
in the future.