These field are difficult to interpret, and are provided by a single
encoder (mpegvideoenc). In general they do not belong to a structure
containing raw data only, so remove them from AVFrame.
Mpegvideoenc now uses a private field in Picture for its internal
computations.
This bit is 1 in some samples, and seems to coincide with interlaced
mbs and CID1260. 2008 specs do not know about it, and maintain qscale
is 11 bits. This looks oversized, but may help larger bitdepths.
Currently, it leads to an obviously incorrect qscale value, meaning
its syntax is shifted by 1. However, reading 11 bits also leads to
obviously incorrect decoding: qscale seems to be 10 bits.
However, as most profiles still have 11bits qscale, the feature is
restricted to the CID1260 profile (this flag is dependent on
a higher-level flag located in the header).
The encoder writes 12 bits of syntax, last and first bits always 0,
which is now somewhat inconsistent with the decoder, but ends up with
the same effect (progressive + reserved bit).
This reverts commit 7bb1c1bfd22de2200743af04ebd0c7c775f56f7e.
A long existing version in the form of avconv -h decoder=h264 already
existed, and this just duplicates it.
lavc: Make AVPacket.duration int64, and deprecate convergence_duration
Note that convergence_duration had another meaning, one which was in
practice never used. The only real use for it was a 64 bit replacement
for the duration field. It's better just to make duration 64 bits, and
to get rid of it.
File libopenh264enc.c has been modified so that the encoder uses av_log()
to log messages (error, warning, info, etc.) instead of logging them
directly to stderr. At the time the encoder is created, the current
libav log level is mapped to an equivalent libopenh264 log level. This
log level, and a message logging function that invokes av_log() to
actually log messages, are then set on the encoder.
This contains further changes and simplifications by Michael Niedermayer
and Martin Storsjö.
Henrik Gramner [Wed, 23 Sep 2015 15:22:38 +0000 (17:22 +0200)]
checkasm/x86: Correctly handle variadic functions
The System V ABI on x86-64 specifies that the al register contains an upper
bound of the number of arguments passed in vector registers when calling
variadic functions, so we aren't allowed to clobber it.
checkasm_fail_func() is a variadic function so also zero al before calling it.
Henrik Gramner [Fri, 25 Sep 2015 19:35:35 +0000 (21:35 +0200)]
checkasm: Use a self-balancing tree
Tested functions are internally kept in a binary search tree for efficient
lookups. The downside of the current implementation is that the tree quickly
becomes unbalanced which causes an unneccessary amount of comparisons between
nodes. Improve this by changing the tree into a self-balancing left-leaning
red-black tree with a worst case lookup/insertion time complexity of O(log n).
Significantly reduces the recursion depth and makes the tests run around 10%
faster overall. The relative performance improvement compared to the existing
non-balanced tree will also most likely increase as more tests are added.
This function can intrinsically not deal with codec profile fallback
(for H.264 Constrained Baseline especially), and was made redundant
by av_vdpau_bind_context().
AVBufferRef.data and AVPacket.data don't need to have the same value.
AVPacket could point anywhere into the buffer. Likewise, the sizes
don't need to be the same.
This works only for extradata sizes up to 128 bytes. Additionally, I
could never actually see it doing anything. The new code using
MMAL_BUFFER_HEADER_FLAG_CONFIG now takes care of this.
We can send mp4-style data directly. But for some reason, this requires
sending the extradata as buffer with MMAL_BUFFER_HEADER_FLAG_CONFIG
set. Reuse the infrastructure for sending AVPackets to do this.
Add an allowed parameter to -h and --help avconv option to print private
options from a codec, format, or filter, named with the provided input
value.
In case multiple classes are found (eg. mov demuxer and mov muxer, or
h264 decoder and h264 demuxer) print all options from all classes.
It is possible to select the type of class to print by adding it
before the name (eg. demuxer:mov and muxer:mov, or decoder:h264and
demuxer:h264).
packets are queued due to packet reordering until the queue reach its
maximal size or max delay is reached.
This commit adds a warning trace when max delay is reached.
Signed-off-by: Eloi BAIL <eloi.bail@savoirfairelinux.com> Signed-off-by: Martin Storsjö <martin@martin.st>
Martin Storsjö [Sat, 12 Sep 2015 14:37:09 +0000 (16:37 +0200)]
rtpdec: Increase the max size of the jitter buffer to 500 packets
Since the actual max length of the jitter buffer is restricted by
max_delay, this shouldn't harm the overall latency (assuming that
max_delay is set properly), while allowing packet reordering with
a larger number of packets (which may be required with high bitrate
video).
"int" is useful in testing because provides accurate results across
different plaftforms, so remove it from the scheduled FF_API_UNUSED_MEMBERS
deprecation.
This introduces a slight timebase computation difference in zmbv-8bit
fate test. This is expected since the new options are double instead
of ints, and the additional precision skews the results in a non
meaningful way.
This also drops setting the frame->pts field. This is usually not set by
decoders, so this would be an inconsistency that's at worst a danger to
the API user.
It appears the buffer->dts field is normally not set by the MMAL
decoder, so don't use it. If it's ever going to be set by MMAL, we
don't know whether the value will be what we want.
lavc: allow asynchronous decoders to return correct pkt_dts values
The generic code in utils.c sets the AVFrame.pkt_dts field from the
packet it was supposedly decoded. This does not have to be true for a
fully asynchronous decoder like mmaldec. It could be overwritten with an
incorrect value. Even if the decoder doesn't determine the DTS (but sets
it to AV_NOPTS_VALUE), it's impossible to determine a correct value in
utils.c.
Decoders can now be marked with FF_CODEC_CAP_SETS_PKT_DTS, in which case
utils.c won't overwrite the field. The decoders are expected to set this
field (even if they only set it to AV_NOPTS_VALUE).
This MMAL feature fills in missing timestamps from the framerate set on
the input port. This is generally unwanted, since libavcodec decoders
merely pass through timestamps without ever "fixing" them. The framerate
is also unknown, and even the timebase doesn't have to be set.
Don't try to do a blocking wait for MMAL output if we haven't even sent
a single real packet, but only flush packets. Obviously we can't expect
to get anything back.
Additionally, don't send a flush packet to MMAL in the same case. It
appears the MMAL decoder will sometimes hang in mmal_vc_port_disable()
(called from ffmmal_close_decoder()), waiting for a reply from the GPU
which never arrives. Either MMAL disallows sending flush packets without
preceding real data, or it's a MMAL bug.
mmaldec: hack against buffering problems on broken input
I can't come up with a nice way to handle this. It's hard to keep the
lock-stepped input/output in this case. You can't predict whether the
MMAL decoder will output a picture (because it's asynchronous), so
you have to assume in general that any packet could produce 0 or 1
frames. You can't continue to write input packets to the decoder,
because then you might get too many output frames, which you can't
get rid of because the lavc decoding API does not allow the decoder
to return an output frame without consuming an input frame (except
when flushing).
The ideal fix is a M:N decoding API (preferably asynchronous), which
would make this code potentially much cleaner. For now, this hack
will do.
Hendrik Leppkes [Wed, 9 Sep 2015 10:56:48 +0000 (12:56 +0200)]
pixdesc: Consistently order components
Ensure that the components are ordered consistently, ie. always
RGB(A) and YUV(A). This allows to identify a specific plane on a given
pixel format without hard-coding knowledge of the plane order.
lavu: Remove bit packing from AVComponentDescriptor
There is no practical benefit in having this structure elements
bit packed given the size of the structure and its usage.
Change types from uint16_t (packed) to plain int in order to simplify
modifying the structure and accessing its fields.
Martin Storsjö [Wed, 2 Sep 2015 10:05:45 +0000 (13:05 +0300)]
mov: Allow more than one keyframe per trun
The previous restriction was partially designed to fix certain
(broken) samples from bug 215. There should be no restriction on the
number of keyframes per fragment or trun.
The spec suggests that all frames lacking MOV_FRAG_SAMPLE_FLAG_IS_NON_SYNC
are key frames, but we require the flag MOV_FRAG_SAMPLE_FLAG_DEPENDS_YES
to be unset as well. This works for (possibly broken) media that never
sets the NON_SYNC flag and should also be correct for any spec-compliant
file.
For files that never set either of the flags, all samples are marked
as keyframes.
projects / ffmpeg / log