* qatar/master: (25 commits)
riff: fix invalid av_freep() calls on EOF in ff_read_riff_info
pam: Fix a typo that broke writing and reading PAM files.
mxfdec: fix memleak on av_realloc failures
mxfdec: Do not parse slices or DeltaEntryArrays.
mxfdec: hybrid demuxing/seeking solution
mxfdec: Add Avid's essence element key.
mfxdec: Separate mxf_essence_container_uls for audio and video.
mxfdec: Compute packet offsets properly.
mxfdec: Use MaterialPackage - Track - TrackID instead of the system_item hack.
mxfdec: use av_dlog() for 'no corresponding source package found'
mxfdec: Make mxf->partitions sorted by offset.
mxfdec: parse ThisPartition
mxfdec: Speed up metadata and index parsing.
mxfdec: Make sure DataDefinition is consistent between material track and source track.
mxfdec: add EssenceContainer UL found in 0001GL00.MXF.A1.mxf_opatom.mxf
mxfdec: Add hack that adjusts the n_delta calculation when system items are present.
mxfdec: Parse IndexTableSegments and convert them into AVIndexEntry arrays.
mxfdec: Move FooterPartition to MXFContext and make sure it is never zero.
mxfdec: check return value of avio_seek
mxfdec: skip to end of structural sets
...
Philip Langdale [Sun, 22 Jan 2012 21:47:00 +0000 (13:47 -0800)]
CrystalHD: Back up extradata to allow decoder reinit to work.
This was a regression that came in when I switched to using the
h.264 annex b filter all the time. As the filter modifies extradata,
its use violates the statelessness assumption that exists in the
'ffmpeg' command line tool, and maybe elsewhere. It assumes that
a docoder can be reinitalised and pointed to an existing stream and
get the same results.
For now, the only way to meet this requirement is to backup the
extradata.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Janne Grunau [Thu, 8 Dec 2011 19:28:49 +0000 (20:28 +0100)]
mxfdec: hybrid demuxing/seeking solution
This uses the old demuxing code for OP1a and separate demuxing code for OPAtom.
Timestamp output is added to the old demuxing code.
The seeking code is made to seek to the start of the desired EditUnit only,
from which the normal demuxing code takes over (if OP1a). This means we
do not use delta entries or slices, only StreamOffsets. OPAtom seeking
basically works like before.
This also makes D-10 seeking behave the same way as OP1a and OPAtom. In other
words, we allow seeking before the start or past the end for D-10 too.
Based on several patches by Tomas Härdin <tomas.hardin@codemill.se> and
Reimar Döffinger <Reimar.Doeffinger@gmx.de>.
Changed av_calloc to av_mallocz, added overflow checks.
Tomas Härdin [Mon, 14 Mar 2011 16:00:21 +0000 (17:00 +0100)]
mxfdec: Speed up metadata and index parsing.
Specifically, this means parsing as before until we run into essence.
At that point we seek to the footer and parse until EOF. After that we start
seeking backward to the previous partition and parse that until we run into
essence or the next partition. This procedure is repeated until we encounter
the last partition we parsed in the forward direction.
The end result of all this is that large essence containers are not needlessly
parsed. This speeds up parsing large files a lot.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Philip de Nier [Mon, 12 Sep 2011 10:13:44 +0000 (11:13 +0100)]
mxfdec: skip to end of structural sets
This fixes reading of partition packs. The code stops reading after the
operational pattern and should skip the array of essence container
labels that follow.
Signed-off-by: Janne Grunau <janne-libav@jannau.net>
Anton Khirnov [Thu, 12 Jan 2012 08:51:23 +0000 (09:51 +0100)]
avserver: fix build after the next bump.
Now that 0.8 is out we can reapply this commit. It breaks shared
avserver builds due to avserver using internal libavformat symbols,
which are now hidden, so this commit also disables avserver with
--enable-shared.
Dmitry Volyntsev [Wed, 18 Jan 2012 09:46:37 +0000 (13:46 +0400)]
rtsp: Use a random offset for trying to open UDP ports for RTP
This avoids (for all practical cases) the issue of reusing
the same UDP port as for an earlier connection. If the remote
doesn't know the previous session was closed, he might keep
on sending packets to that port. If we always start off trying
to open the same UDP port, we might get those packets intermixed
with the new ones.
This is occasionally an issue when testing RTSP stuff with
DSS, perhaps also with other servers.
Using threaded decoding by default breaks backward compatibility if
AVHWAccel is used or if an appliction sets threadunsafe callbacks.
Avconv and avplay still use -threads auto if not specified.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
rtpdec: Use our own SSRC in the SDES field when sending RRs
Finalize changelog for 0.8 Release
Prepare for 0.8 Release
threads: change the default for threads back to 1
threads: update slice_count and slice_offset from user context
aviocat: Remove useless includes
doc/APIChanges: fill in missing dates and hashes
Revert "avserver: fix build after the next bump."
mpegaudiodec: switch error detection check to AV_EF_BUFFER
lavf: rename fer option and document resulting (f_)err_detect options
lavc: rename err_filter option to err_detect and document it
mpegvideo: fix invalid memory access for small video dimensions
movenc: Reorder entries in the MOVIentry struct, for tigheter packing
rtsp: Remove extern declarations for variables that don't exist
aviocat: Flush the output before closing
Martin Storsjö [Sat, 21 Jan 2012 15:20:45 +0000 (17:20 +0200)]
rtpdec: Use our own SSRC in the SDES field when sending RRs
The s->ssrc field is the sender's SSRC, we use ssrc + 1 to get
a collision free "unique" SSRC for ourselves in the RR part.
The SDES block in the RTCP packet should describe ourselves,
not the sender.
This was fixed for the RR part in 952139a3226b, but wasn't
fixed for the SDES part until now.
This could cause some Axis cameras to send RTCP BYE packets
to us due to the SSRC collision.
Janne Grunau [Wed, 18 Jan 2012 09:53:41 +0000 (10:53 +0100)]
threads: change the default for threads back to 1
Using threaded decoding by default breaks backward compatibility if
AVHWAccel is used or if an appliction sets threadunsafe callbacks.
Avconv and avplay still use -threads auto if not specified.
Anton Khirnov [Sat, 21 Jan 2012 07:40:47 +0000 (08:40 +0100)]
Revert "avserver: fix build after the next bump."
This temporarily (until 0.8 is released) reverts commit 8e1340abc316e038bb89e5a3b46e92ff58c98a88. That commit breaks shared
builds because of symbol hiding. Reverting it will enable shared builds
for 0.8
John Brooks [Tue, 13 Dec 2011 00:04:14 +0000 (17:04 -0700)]
mpegvideo: fix invalid memory access for small video dimensions
When either video dimension is only one macroblock, subtractions
based on v_edge_pos and the macroblock size may be negative. In
that situation, an unsigned comparison isn't sufficent to test for
MV overruns, because a limit of (unsigned)-1 will let any other
value pass.
ac3dec: Move center&surround mix level tables to parser.
That way all mix levels as exported by the parser
will have the same meaning.
Previously the 3bit center mix level for eac3 was
used to index in a 4 entry table leading to out of array reads.
this change removes the table and offsets the ac3 variable by 4
so it matches the meanings for eac3 except the reserved case.
The reserved case is then explicitly handled.
Idea-by: Justin Ruggles <justin.ruggles@gmail.com> Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
Ray Simard [Sat, 21 Jan 2012 02:19:46 +0000 (18:19 -0800)]
deshake: variable used uninitialized
Sometimes the scan finds nothing that qualifies for addition to
the array and pos is zero after the loops. The code forces pos to
1 and the array is then processed as if it had one valid element in it,
producing some amusing but not very useful results.
I don't see the rationale for this. If pos is zero coming out of the
loops, the only appropriate thing to do is set t->angle to zero. The
attached patch does that. It's worked properly in several tests so far.
Signed-off-by: Michael Niedermayer <michaelni@gmx.at>
* qatar/master:
Add a tool that uses avio to read and write, doing a plain copy of data
ARM: fix build with FFT enabled and MDCT disabled
lavf: force single-threaded decoding in avformat_find_stream_info
avidec: migrate last of lavf from FF_ER_* to AV_EF_*
avserver: fix build after the next bump.
Martin Storsjö [Fri, 20 Jan 2012 18:48:19 +0000 (20:48 +0200)]
movenc: Reorder entries in the MOVIentry struct, for tigheter packing
Originally, sizeof(struct MOVIentry) was 48, after the reordering,
it is 40 in my build configuration.
When writing really long mov/mp4 files, this can make a difference
- this saves a bit over 2 MB of memory per hour of video (down to
10.3 MB per hour from 12.3 MB per hour initially) for a video with
75 packets per second - 25 fps + 50 audio packets (which is the
case for AMR audio).
projects / ffmpeg / log