]> git.sesse.net Git - cubemap/log
cubemap
9 years agoParse and log referer and user-agent headers in requests.
Steinar H. Gunderson [Wed, 22 Jul 2015 13:05:14 +0000 (15:05 +0200)]
Parse and log referer and user-agent headers in requests.

9 years agoTabs are seemingly accepted as linear white space in HTTP headers.
Steinar H. Gunderson [Wed, 22 Jul 2015 09:48:30 +0000 (11:48 +0200)]
Tabs are seemingly accepted as linear white space in HTTP headers.

9 years agoSplit HTTP header parsing into a common function.
Steinar H. Gunderson [Wed, 22 Jul 2015 09:46:42 +0000 (11:46 +0200)]
Split HTTP header parsing into a common function.

9 years agoMake a comment more precise.
Steinar H. Gunderson [Wed, 22 Jul 2015 00:27:06 +0000 (02:27 +0200)]
Make a comment more precise.

9 years agoReplace an assert with a small hack.
Steinar H. Gunderson [Wed, 22 Jul 2015 00:12:37 +0000 (02:12 +0200)]
Replace an assert with a small hack.

Instead of checking that connect times are monotonic, explicitly make them
so if they're not. This seems safest, in case the monotonic clock goes
backwards a small bit (e.g. when changing CPUs). We don't need it for the
serialized case since we explicitly sort those by time; the assert can stay.

9 years agoTime out clients still in READING_REQUEST after 60 seconds.
Steinar H. Gunderson [Tue, 21 Jul 2015 23:57:04 +0000 (01:57 +0200)]
Time out clients still in READING_REQUEST after 60 seconds.

Seemingly there are some of these around, and I've seen them eat up
fds in a long-running server. There's some pain in sorting the clients
on deserialization, but apart from that, this ended up being relatively
pain-free and should be efficient enough.

9 years agoChange the connected time from time_t to timespec.
Steinar H. Gunderson [Tue, 21 Jul 2015 23:08:00 +0000 (01:08 +0200)]
Change the connected time from time_t to timespec.

The primary gain as the code stands is that we become immune to
issues with the clock going backwards etc. in logs (since we can
now use a monotonic timer).

However, the motivating change is that we will soon be implementing request
read timeouts. At that point, not only will the clock data be much more
important to get right, but it will also be nice to have more fine-grained
timestamps to be able to locate clients semi-uniquely in a sorted list.

9 years agoMerge branch 'master' of /srv/git.sesse.net/www/cubemap
Steinar H. Gunderson [Fri, 10 Jul 2015 21:46:37 +0000 (23:46 +0200)]
Merge branch 'master' of /srv/git.sesse.net/www/cubemap

9 years agoAdd support for forced prebuffering.
Steinar H. Gunderson [Fri, 10 Jul 2015 21:29:42 +0000 (23:29 +0200)]
Add support for forced prebuffering.

The motivation is jwPlayer, which for HTTP files expects to be able
to do no prebuffering and just download full speed nevertheless
(as it assumes they are static files, not streams) -- when it cannot,
it shows an ugly icon on top of the stream all the time. So we add
an option for forced prebuffering (three seconds seems to be about
fine) which means we wait sending until we have a pretty big backlog.

Ideally, we would be able to actually send old data instead of just
waiting (which would mean that the client doesn't need the extra wait
at the beginning), but it's complicated with having to remember old
keyframe positions, changed stream headers etc.

9 years agoBeef up the warning limit for large blocks a bit; MKV chunks can get pretty big.
Steinar H. Gunderson [Fri, 10 Jul 2015 21:01:50 +0000 (23:01 +0200)]
Beef up the warning limit for large blocks a bit; MKV chunks can get pretty big.

9 years agoUse accept4() to save a system call. Probably inconsequential, but still nice.
Steinar H. Gunderson [Sat, 13 Jun 2015 20:40:40 +0000 (22:40 +0200)]
Use accept4() to save a system call. Probably inconsequential, but still nice.

10 years agoBump version number to 1.1.3-pre.
Steinar H. Gunderson [Mon, 7 Jul 2014 17:39:46 +0000 (19:39 +0200)]
Bump version number to 1.1.3-pre.

10 years agoRelease Cubemap 1.1.2. 1.1.2
Steinar H. Gunderson [Mon, 7 Jul 2014 17:39:35 +0000 (19:39 +0200)]
Release Cubemap 1.1.2.

10 years agoRemove some leftover debug code that would cause compile errors.
Steinar H. Gunderson [Mon, 7 Jul 2014 17:39:08 +0000 (19:39 +0200)]
Remove some leftover debug code that would cause compile errors.

10 years agoBump version number to 1.1.2-pre.
Steinar H. Gunderson [Sun, 6 Jul 2014 12:42:41 +0000 (14:42 +0200)]
Bump version number to 1.1.2-pre.

10 years agoRelease Cubemap 1.1.1. 1.1.1
Steinar H. Gunderson [Sun, 6 Jul 2014 12:42:17 +0000 (14:42 +0200)]
Release Cubemap 1.1.1.

10 years agoAdd an example of IPv6 SSM to the config file.
Steinar H. Gunderson [Thu, 3 Jul 2014 23:04:57 +0000 (01:04 +0200)]
Add an example of IPv6 SSM to the config file.

10 years agoFix some issues in parsing IPv6 multicast addresses.
Steinar H. Gunderson [Thu, 3 Jul 2014 23:03:56 +0000 (01:03 +0200)]
Fix some issues in parsing IPv6 multicast addresses.

10 years agoChange the default backlog size to 10MB; I have seen the 1MB limit backfire a bit...
Steinar H. Gunderson [Thu, 3 Jul 2014 22:54:18 +0000 (00:54 +0200)]
Change the default backlog size to 10MB; I have seen the 1MB limit backfire a bit too many times for HD video now.

10 years agoFix a typo.
Steinar H. Gunderson [Sun, 11 May 2014 07:42:46 +0000 (09:42 +0200)]
Fix a typo.

10 years agoBump version number to 1.1.1-pre.
Steinar H. Gunderson [Thu, 1 May 2014 04:21:37 +0000 (21:21 -0700)]
Bump version number to 1.1.1-pre.

10 years agoRelease Cubemap 1.1.0. 1.1.0
Steinar H. Gunderson [Thu, 1 May 2014 04:21:23 +0000 (21:21 -0700)]
Release Cubemap 1.1.0.

10 years agoCoding style consistency fix.
Steinar H. Gunderson [Tue, 29 Apr 2014 03:34:05 +0000 (20:34 -0700)]
Coding style consistency fix.

10 years agoBump man page date.
Steinar H. Gunderson [Sat, 26 Apr 2014 23:11:08 +0000 (01:11 +0200)]
Bump man page date.

10 years agoSupport joining multicast addresses (both ASM and SSM).
Steinar H. Gunderson [Sat, 26 Apr 2014 22:41:08 +0000 (00:41 +0200)]
Support joining multicast addresses (both ASM and SSM).

10 years agoCorrect the README and man page files for removed information.
Steinar H. Gunderson [Sat, 26 Apr 2014 22:38:19 +0000 (00:38 +0200)]
Correct the README and man page files for removed information.

10 years agoRemove information about fwmark from the man page.
Steinar H. Gunderson [Sat, 26 Apr 2014 18:17:09 +0000 (20:17 +0200)]
Remove information about fwmark from the man page.

10 years agoSupport setting outgoing interface for multicast.
Steinar H. Gunderson [Sat, 26 Apr 2014 18:01:00 +0000 (20:01 +0200)]
Support setting outgoing interface for multicast.

This should complete multicast output support.

10 years agoSupport setting TTL on outgoing UDP streams. Especially useful for multicast.
Steinar H. Gunderson [Sat, 26 Apr 2014 17:00:37 +0000 (19:00 +0200)]
Support setting TTL on outgoing UDP streams. Especially useful for multicast.

10 years agoDo not store the UDP pacing rate; we do not use it after the constructor.
Steinar H. Gunderson [Sat, 26 Apr 2014 16:56:02 +0000 (18:56 +0200)]
Do not store the UDP pacing rate; we do not use it after the constructor.

10 years agoFix a bug where a socket could be closed twice.
Steinar H. Gunderson [Sat, 26 Apr 2014 16:45:47 +0000 (18:45 +0200)]
Fix a bug where a socket could be closed twice.

This would only happen if a HTTP input that wasn't fully setup yet
was no longer in use after an reload. This would normally manifest itself as
a “close(): Bad file descriptor”, but could also end up closing an arbitrary
descriptor, causing various sorts of havoc.

10 years agoRemove mark= from cubemap.config.sample, as the option no longer exists.
Steinar H. Gunderson [Sat, 26 Apr 2014 08:42:39 +0000 (10:42 +0200)]
Remove mark= from cubemap.config.sample, as the option no longer exists.

10 years agoFix O_TMPFILE usage.
Steinar H. Gunderson [Thu, 24 Apr 2014 22:51:13 +0000 (00:51 +0200)]
Fix O_TMPFILE usage.

Seemingly open() needs to take a pathname only, not a full filename.
This made us _always_ go into the mkstemp() path, which was of course
not the intention.

10 years agoSet umask explicitly before calling mkstemp().
Steinar H. Gunderson [Thu, 24 Apr 2014 22:49:51 +0000 (00:49 +0200)]
Set umask explicitly before calling mkstemp().

For the benefit of super-old glibc versions (pre-2.06).

Found by Coverity Scan.

10 years agoCheck the return value of fclose() in config.cpp.
Steinar H. Gunderson [Thu, 24 Apr 2014 22:41:44 +0000 (00:41 +0200)]
Check the return value of fclose() in config.cpp.

It's unclear to me exactly how this could fail for a read-only file,
but it's good practice nevertheless.

Found by Coverity Scan.

10 years agoRemove support for mark pools.
Steinar H. Gunderson [Thu, 24 Apr 2014 21:56:41 +0000 (23:56 +0200)]
Remove support for mark pools.

This has been fully obsoleted by the fq qdisc, which is easier to set up,
more scalable and does not require root privileges. Removing it also removes
a significant chunk of code, which is good.

10 years agoSet the default number of files to 16384; the default is seemingly 1024, which can...
Steinar H. Gunderson [Mon, 21 Apr 2014 17:05:11 +0000 (19:05 +0200)]
Set the default number of files to 16384; the default is seemingly 1024, which can easily bite you very hard.

10 years agoBump version number to 1.0.5-pre.
Steinar H. Gunderson [Sun, 13 Apr 2014 20:42:18 +0000 (22:42 +0200)]
Bump version number to 1.0.5-pre.

10 years agoMake sure we don't overwrite an existing configuration on make install.
Steinar H. Gunderson [Sun, 13 Apr 2014 20:34:51 +0000 (22:34 +0200)]
Make sure we don't overwrite an existing configuration on make install.

10 years agoStop leaking the state fd on reload.
Steinar H. Gunderson [Sun, 13 Apr 2014 20:33:19 +0000 (22:33 +0200)]
Stop leaking the state fd on reload.

10 years agoStop logging loss fraction; it is only spam now, and we have the information in ...
Steinar H. Gunderson [Sun, 13 Apr 2014 19:32:21 +0000 (21:32 +0200)]
Stop logging loss fraction; it is only spam now, and we have the information in .stats.

10 years agoCheck /proc/self/exe instead of argv[0].
Steinar H. Gunderson [Sun, 13 Apr 2014 19:31:09 +0000 (21:31 +0200)]
Check /proc/self/exe instead of argv[0].

10 years agoFix URL parsing of HTTP inputs with no port.
Steinar H. Gunderson [Sun, 13 Apr 2014 19:30:44 +0000 (21:30 +0200)]
Fix URL parsing of HTTP inputs with no port.

10 years agoRelease Cubemap 1.0.4. 1.0.4
Steinar H. Gunderson [Sun, 23 Mar 2014 16:35:16 +0000 (17:35 +0100)]
Release Cubemap 1.0.4.

10 years agoFix a segfault on reload introduced by the pacing changes.
Steinar H. Gunderson [Sun, 23 Mar 2014 16:31:25 +0000 (17:31 +0100)]
Fix a segfault on reload introduced by the pacing changes.

10 years agoRemove the Metacube VLC patch; it is now upstream.
Steinar H. Gunderson [Sat, 15 Mar 2014 01:08:04 +0000 (02:08 +0100)]
Remove the Metacube VLC patch; it is now upstream.

10 years agoCompile with large file support, especially since pwritev() on 32-bit x86 seems to...
Steinar H. Gunderson [Thu, 6 Feb 2014 23:42:40 +0000 (00:42 +0100)]
Compile with large file support, especially since pwritev() on 32-bit x86 seems to be broken without.

10 years agoBump version number to 1.0.4-pre.
Steinar H. Gunderson [Thu, 6 Feb 2014 21:40:07 +0000 (22:40 +0100)]
Bump version number to 1.0.4-pre.

10 years agoRelease Cubemap 1.0.3. 1.0.3
Steinar H. Gunderson [Thu, 6 Feb 2014 21:37:28 +0000 (22:37 +0100)]
Release Cubemap 1.0.3.

10 years agoFix compilation error with newer glibc; broken after IWYU. origin/HEAD origin/master
Steinar H. Gunderson [Thu, 6 Feb 2014 21:35:04 +0000 (22:35 +0100)]
Fix compilation error with newer glibc; broken after IWYU.

10 years agoBump version number to 1.0.3-pre.
Steinar H. Gunderson [Mon, 3 Feb 2014 23:47:49 +0000 (00:47 +0100)]
Bump version number to 1.0.3-pre.

10 years agoRelease Cubemap 1.0.2. 1.0.2
Steinar H. Gunderson [Mon, 3 Feb 2014 23:39:57 +0000 (00:39 +0100)]
Release Cubemap 1.0.2.

10 years agoThe SO_MAX_PACING_RATE patches are now released in 3.13.
Steinar H. Gunderson [Mon, 3 Feb 2014 23:37:49 +0000 (00:37 +0100)]
The SO_MAX_PACING_RATE patches are now released in 3.13.

10 years agoFix handling of streams with no data.
Steinar H. Gunderson [Sun, 2 Feb 2014 23:25:41 +0000 (00:25 +0100)]
Fix handling of streams with no data.

The original plan here was to let the client hang until we had
some headers to send (ie., first send an empty header and then
0 bytes data, and then send the client back from SENDING_DATA
to SENDING_HEADER as we got data).

However, as time went by, we started inserting stuff in the middle of the
headers ourselves, resulting in us sending pretty much a junk header.
Worse, this would be sent on to other relays, corrupting the version of
the Metacube stream.

Simply return 503 Not Available now instead if the stream is still
starting up; it's pretty much as good, and has fewer edge cases
to worry about.

10 years agoFix a crash bug on reload.
Steinar H. Gunderson [Sun, 2 Feb 2014 21:36:43 +0000 (22:36 +0100)]
Fix a crash bug on reload.

This could happen in the case where we reloaded while still waiting for
the request from a given client.

10 years agoRemove some legacy from older versions that nobody uses anymore.
Steinar H. Gunderson [Sat, 1 Feb 2014 21:58:11 +0000 (22:58 +0100)]
Remove some legacy from older versions that nobody uses anymore.

10 years agoMinor deduplication.
Steinar H. Gunderson [Sun, 1 Dec 2013 01:41:15 +0000 (02:41 +0100)]
Minor deduplication.

10 years agoFix some duplicated IP address parsing code.
Steinar H. Gunderson [Sun, 1 Dec 2013 00:27:50 +0000 (01:27 +0100)]
Fix some duplicated IP address parsing code.

10 years agoMove some config stuff into an anonymous namespace.
Steinar H. Gunderson [Sun, 1 Dec 2013 00:21:21 +0000 (01:21 +0100)]
Move some config stuff into an anonymous namespace.

10 years agoFix some signed/unsigned comparison warnings (pacing_rate should be uint32_t everywhe...
Steinar H. Gunderson [Sun, 1 Dec 2013 00:18:41 +0000 (01:18 +0100)]
Fix some signed/unsigned comparison warnings (pacing_rate should be uint32_t everywhere, not just in UDPStream).

10 years agoAdd a listen statement to listen on only specific IP addresses, in addition to the...
Steinar H. Gunderson [Sun, 1 Dec 2013 00:16:41 +0000 (01:16 +0100)]
Add a listen statement to listen on only specific IP addresses, in addition to the port statement.

11 years agoWhen checking to see if we want to warn about pacing rate, use the correct default...
Steinar H. Gunderson [Thu, 17 Oct 2013 12:43:34 +0000 (14:43 +0200)]
When checking to see if we want to warn about pacing rate, use the correct default (~0U, not 0).

11 years agoBump version number to 1.0.2-pre.
Steinar H. Gunderson [Tue, 1 Oct 2013 22:19:59 +0000 (00:19 +0200)]
Bump version number to 1.0.2-pre.

11 years agoUpdate the VLC Metacube patch to apply against current VLC master.
Steinar H. Gunderson [Tue, 1 Oct 2013 22:19:10 +0000 (00:19 +0200)]
Update the VLC Metacube patch to apply against current VLC master.

This version is identical to the one that was sent to the VLC mailing list
for upstream inclusion (but not accepted), so it also contains some other
cleanups.

11 years agoSupport SO_MAX_PACING_RATE.
Steinar H. Gunderson [Sat, 28 Sep 2013 22:37:43 +0000 (00:37 +0200)]
Support SO_MAX_PACING_RATE.

SO_MAX_PACING_RATE is the newfangled socket option from Eric Dumazet,
used with the new fq packet scheduler in Linux. It allows you to set
a max rate for the socket (presumably a stricter upper bound than the
RTT-based estimate from the kernel), delivering pacing without having
to resort to the relatively complex mark setup. It seems to enter
the Linux kernel in 3.13 at the earliest; not unlikely even later.

In time, fwmark will be deprecated, but the implementation of TCP pacing in
Linux is still a bit shaky (especially with not-always-filling applications
like streaming), so fwmark will stay the primary solution for now.

11 years agoRelease Cubemap 1.0.1. 1.0.1
Steinar H. Gunderson [Thu, 19 Sep 2013 17:41:42 +0000 (19:41 +0200)]
Release Cubemap 1.0.1.

11 years agoAdd NEWS file for upcoming release.
Steinar H. Gunderson [Thu, 19 Sep 2013 17:41:33 +0000 (19:41 +0200)]
Add NEWS file for upcoming release.

11 years agoFix compilation on 32-bit systems.
Steinar H. Gunderson [Thu, 19 Sep 2013 09:34:54 +0000 (11:34 +0200)]
Fix compilation on 32-bit systems.

11 years agoFix capitalization in systemd service unit.
Steinar H. Gunderson [Tue, 10 Sep 2013 20:45:34 +0000 (22:45 +0200)]
Fix capitalization in systemd service unit.

11 years agoUpdate the man page with our non-alphaness as well.
Steinar H. Gunderson [Sun, 8 Sep 2013 22:27:41 +0000 (00:27 +0200)]
Update the man page with our non-alphaness as well.

11 years agoUpdate README; we are not in alpha stage anymore.
Steinar H. Gunderson [Sun, 8 Sep 2013 22:23:02 +0000 (00:23 +0200)]
Update README; we are not in alpha stage anymore.

11 years agoAdd systemd service unit.
Philipp Kern [Sun, 8 Sep 2013 21:10:56 +0000 (23:10 +0200)]
Add systemd service unit.

11 years agoMakefile: Implement sysconfdir and localstatedir.
Philipp Kern [Sun, 8 Sep 2013 21:10:55 +0000 (23:10 +0200)]
Makefile: Implement sysconfdir and localstatedir.

It is a bit odd to use $(PREFIX) for some, but not all directories. Make
this a useable middle ground akin autoconf, which allows to pass in
different paths for /var (--localstatedir) and /etc (--sysconfdir).

11 years agoUpdate version number to 1.0.1-pre.
Steinar H. Gunderson [Sun, 8 Sep 2013 16:48:52 +0000 (18:48 +0200)]
Update version number to 1.0.1-pre.

11 years agoUse the new-in-3.11 O_TMPFILE flag when available.
Steinar H. Gunderson [Sun, 8 Sep 2013 16:47:41 +0000 (18:47 +0200)]
Use the new-in-3.11 O_TMPFILE flag when available.

Also, we don't need to mess around with umask in the fallback case,
since 0600 is default for mkstemp() anyway.

11 years agoReduce contention of queued_data_mutex.
Steinar H. Gunderson [Sun, 8 Sep 2013 16:18:14 +0000 (18:18 +0200)]
Reduce contention of queued_data_mutex.

Seemingly holding queued_data_mutex over add_data_raw(), which does writev(),
could be slow on systems where /tmp is not on tmpfs, causing the queued_data_mutex
to be held for so long (up to a second has been observed) that the input thread
couldn't keep up.

To fix this, we move queued_data_mutex into a per-stream variable (not sure
if it's ideal, but it was the simplest way to avoid ugliness), and then hold it
for as short as possible in process_queued_data().

While we're at it, document that queued_data_last_starting_point has the same
locking rules as queued_data.

11 years agoRelease Cubemap 1.0.0. 1.0.0
Steinar H. Gunderson [Sat, 24 Aug 2013 15:55:21 +0000 (17:55 +0200)]
Release Cubemap 1.0.0.

11 years agoInclude a Munin plugin that was missing in the archive.
Steinar H. Gunderson [Sat, 24 Aug 2013 15:58:02 +0000 (17:58 +0200)]
Include a Munin plugin that was missing in the archive.

11 years agoFix an issue where rewind-to-HTTP-header would not properly work.
Steinar H. Gunderson [Sun, 18 Aug 2013 11:46:22 +0000 (13:46 +0200)]
Fix an issue where rewind-to-HTTP-header would not properly work.

11 years agoRe-run include-what-you-use.
Steinar H. Gunderson [Sun, 18 Aug 2013 11:03:40 +0000 (13:03 +0200)]
Re-run include-what-you-use.

11 years agoMunin plugins should be symlinked, not created directly in /etc.
Steinar H. Gunderson [Sun, 18 Aug 2013 09:53:20 +0000 (11:53 +0200)]
Munin plugins should be symlinked, not created directly in /etc.

11 years agoMake the install target install the Munin plugins.
Steinar H. Gunderson [Sun, 18 Aug 2013 09:52:21 +0000 (11:52 +0200)]
Make the install target install the Munin plugins.

11 years agoTweak the MutexLock implementation slightly, so as to confuse Coverity less.
Steinar H. Gunderson [Sun, 18 Aug 2013 08:55:43 +0000 (10:55 +0200)]
Tweak the MutexLock implementation slightly, so as to confuse Coverity less.

11 years agoCompute the checksum on outgoing Metacube packets as well.
Steinar H. Gunderson [Sun, 18 Aug 2013 00:54:54 +0000 (02:54 +0200)]
Compute the checksum on outgoing Metacube packets as well.

11 years agoUse memcpy instead of incurring potential unaligned reads when reading the Metacube...
Steinar H. Gunderson [Sun, 18 Aug 2013 00:48:13 +0000 (02:48 +0200)]
Use memcpy instead of incurring potential unaligned reads when reading the Metacube header.

This would probably be a portability problem for many other platforms than x86.

11 years agoSwitch to a new version of the Metacube protocol.
Steinar H. Gunderson [Sun, 18 Aug 2013 00:37:16 +0000 (02:37 +0200)]
Switch to a new version of the Metacube protocol.

Compared to the old version, this fixes many small deficiencies:

 - The header is smaller; 16 instead of 24 bytes. With TS, Metacube actually
   yields noticeable overhead (13% or so), so reducing it by 1/3 is good.
 - The sync no longer overlaps with itself; both starting and ending with
   the same sounds bad if we should ever drop bytes in the middle.
   In fact, it no longer has any repeated characters.
 - The header is checksummed, to avoid cases where a corrupted header
   could cause us to pull in gigabytes of data. (The data is not.)

vlc-metacube.diff has been updated, although it includes another patch
(part of the WebM patch set) since that's what my VLC works from at the moment.

11 years agoMake the HTTP inputs time out after 30 seconds of no activity.
Steinar H. Gunderson [Sat, 17 Aug 2013 13:09:03 +0000 (15:09 +0200)]
Make the HTTP inputs time out after 30 seconds of no activity.

This is useful for the case where the remote machine is gone,
but TCP doesn't pick it up, and thus you can't easily restart
the streaming.

11 years agoCorrect my e-mail address in the man page (cubemap is not written by my Debian hat).
Steinar H. Gunderson [Sat, 17 Aug 2013 09:01:21 +0000 (11:01 +0200)]
Correct my e-mail address in the man page (cubemap is not written by my Debian hat).

11 years agoAdd a manual page for cubemap.
Philipp Kern [Fri, 16 Aug 2013 22:14:24 +0000 (00:14 +0200)]
Add a manual page for cubemap.

11 years agoStore the stream header in the inputs, not just the streams.
Steinar H. Gunderson [Fri, 16 Aug 2013 18:33:57 +0000 (20:33 +0200)]
Store the stream header in the inputs, not just the streams.

This avoids an issue where a stream would get no stream header
when it reused an existing input.

11 years agoWhen adding new streams that are copies of old streams, copy the HTTP header.
Steinar H. Gunderson [Fri, 16 Aug 2013 15:18:56 +0000 (17:18 +0200)]
When adding new streams that are copies of old streams, copy the HTTP header.

This was already fixed for UDP inputs, but not HTTP inputs. Also, we probably
do not do the right thing here for the stream header.

11 years agoMake an option to properly delete streams.
Steinar H. Gunderson [Fri, 16 Aug 2013 17:11:03 +0000 (19:11 +0200)]
Make an option to properly delete streams.

11 years agoDo not crash on invalid src= URLs.
Steinar H. Gunderson [Fri, 16 Aug 2013 15:43:53 +0000 (17:43 +0200)]
Do not crash on invalid src= URLs.

11 years agoDefault PREFIX should be /usr/local, not /usr.
Steinar H. Gunderson [Fri, 16 Aug 2013 12:14:29 +0000 (14:14 +0200)]
Default PREFIX should be /usr/local, not /usr.

11 years agoMakefile: accept LDFLAGS for linking
Philipp Kern [Fri, 16 Aug 2013 09:57:17 +0000 (11:57 +0200)]
Makefile: accept LDFLAGS for linking

11 years agoFix the vertical label of the cubemap_input Munin plugin.
Steinar H. Gunderson [Fri, 16 Aug 2013 11:39:39 +0000 (13:39 +0200)]
Fix the vertical label of the cubemap_input Munin plugin.

11 years agoProvide an install target in the Makefile.
Steinar H. Gunderson [Fri, 16 Aug 2013 09:44:51 +0000 (11:44 +0200)]
Provide an install target in the Makefile.

Based on a patch from Philipp Kern.

11 years agoAdded some Munin plugins.
Steinar H. Gunderson [Fri, 16 Aug 2013 09:29:54 +0000 (11:29 +0200)]
Added some Munin plugins.

11 years agoStore and log connection time for inputs.
Steinar H. Gunderson [Fri, 16 Aug 2013 00:09:34 +0000 (02:09 +0200)]
Store and log connection time for inputs.

11 years agoTwo minor cleanups in the stats code.
Steinar H. Gunderson [Fri, 16 Aug 2013 00:07:19 +0000 (02:07 +0200)]
Two minor cleanups in the stats code.