Sven Dueking [Thu, 7 Feb 2019 08:38:16 +0000 (09:38 +0100)]
srt: Set srto_sender flag to sender srt socket
SRT API Documentation:
This flag is superfluous if both parties are at least version 1.3.0
(this shall be enforced by setting this value to SRTO_MINVERSION if
you expect that it be true) and therefore support HSv5 handshake,
where the SRT extended handshake is done with the overall handshake
process.
This flag is however obligatory if at least one party may be using
SRT below version 1.3.0 and does not support HSv5.
Martin Storsjö [Fri, 25 Jan 2019 08:28:46 +0000 (10:28 +0200)]
libopenh264dec: Use a newer decoding entry point function
The "new" entry point actually has existed since OpenH264 1.4 in
2015 and is the the recommended decoding entry point.
The name of this function, DecodeFrameNoDelay, is rather backwards
considering that it doesn't return the latest decoded frame immediately,
but actually does proper delaying and reordering of frames.
Martin Storsjö [Fri, 11 Jan 2019 13:23:16 +0000 (15:23 +0200)]
arm: Create proper .rdata sections for COFF
As .rodata isn't one of the default created sections for COFF, it was
created as a read-write data section. By using the default .rdata
section name for COFF, it automatically becomes a read-only data section.
The existing ".section .rodata" works as intended for ELF though.
This is based on an original patch and diagnose by Tom Tan
<Tom.Tan@microsoft.com>.
James Almer [Tue, 11 Dec 2018 15:59:09 +0000 (12:59 -0300)]
libdav1d: update API usage to the first stable release
The color fields were moved to another struct, and a way to propagate
timestamps and other input metadata was introduced, so the packet
fifo can be removed.
Add support for 12bit streams, an option to disable film grain, and
read the profile from the sequence header referenced by the ouput
picture instead of guessing based on output pix_fmt.
Linjie Fu [Mon, 5 Nov 2018 02:28:59 +0000 (10:28 +0800)]
qsvenc: Add VDENC support for H264 and HEVC
Add VDENC(lowpower mode) support for QSV h264 and HEVC
It's an experimental function(like lowpower in vaapi) with
some limitations:
- CBR/VBR require HuC which should be explicitly loaded via i915
module parameter(i915.enable_guc=2 for linux kerner version >= 4.16)
- HEVC VDENC was supported >= ICE LAKE
Martin Storsjö [Thu, 11 Oct 2018 13:03:10 +0000 (16:03 +0300)]
libx264: Pass the reordered_opaque field through the encoder
libx264 does have a field for opaque data to pass along with frames
through the encoder, but it is a pointer, while the libavcodec
reordered_opaque field is an int64_t. Therefore, allocate an array
within the libx264 wrapper, where reordered_opaque values in flight
are stored, and pass a pointer to this array to libx264.
Update the public libavcodec documentation for the AVCodecContext
field to explain this usage, and add a codec capability that allows
detecting whether an encoder handles this field.
Martin Storsjö [Thu, 25 Oct 2018 12:41:26 +0000 (15:41 +0300)]
libavutil: Undeprecate the AVFrame reordered_opaque field
This was marked as deprecated (but only in the doxygen, not with an
actual deprecation attribute) in 81c623fae05 in 2011, but was
undeprecated in ad1ee5fa7.
The avcodec_parameters_to_context() call was freeing and reallocating
AVCodecContext->extradata, essentially taking ownership of it, which according
to the doxy is user owned. This is an API break and has produces crashes in
some library users like Firefox.
Revert until a better solution is found to internally propagate the filtered
extradata back into the decoder context.
Zhong Li [Thu, 11 Oct 2018 09:26:12 +0000 (17:26 +0800)]
lavc/qsvenc_jpeg: add async_depth support
Currently qsv (m)jpeg encoding is broken.
Regression introducing by the commit(id: c1bcd3): fix async support,
which requires the minimum async_depth to be 1, instead previous zero.
But the default async_depth of qsv (m)jpeg encoding is still initialized
(mostly) as zero.
This patch also abviously improves qsv (m)jpeg encoding performance
due to the default async_depth is changed to 4.
Signed-off-by: Zhong Li <zhong.li@intel.com> Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Martin Storsjö [Fri, 12 Oct 2018 10:29:51 +0000 (13:29 +0300)]
arm: Emit .thumb_func directives
Prior to Xcode 9.3, the clang built-in assembler didn't support
altmacro, and gas-preprocessor was used for assembling for arm/darwin.
For thumb functions, gas-preprocessor took care of adding the .thumb_func
directives, but when now being able to assemble without gas-preprocessor,
we need to add these directives ourselves.
Martin Storsjö [Wed, 12 Sep 2018 20:03:12 +0000 (23:03 +0300)]
libfdk-aac: Don't use defined() in a #define
MSVC expands the preprocessor directives differently, making the
version check fail in the previous form.
Clang can warn about this with -Wexpansion-to-defined (not currently
enabled by default):
warning: macro expansion producing 'defined' has undefined behavior [-Wexpansion-to-defined]
Martin Storsjö [Tue, 4 Sep 2018 08:29:37 +0000 (11:29 +0300)]
libfdk-aac: Consistently use a proper version check macro for detecting features
The previous version checks checked explicitly for the version
where the version define was added to the installed headers,
making an "#ifdef AACDECODER_LIB_VL0" enough. Now that we have
a need for more diverse version checks than this, convert all checks
to such checks.
Martin Storsjö [Fri, 10 Aug 2018 07:25:59 +0000 (10:25 +0300)]
network: Add RFC 8305 style "Happy Eyeballs"/"Fast Fallback" helper function
For cases with dual stack (IPv4 + IPv6) connectivity, but where one
stack potentially is less reliable, strive to trying to connect over
both protocols in parallel, using whichever address connected first.
In cases with a hostname resolving to multiple IPv4 and IPv6
addresses, the current connection mechanism would try all addresses
in the order returned by getaddrinfo (with all IPv6 addresses ordered
before the IPv4 addresses normally). If connection attempts to the
IPv6 addresses return quickly with an error, this was no problem, but
if they were unsuccessful leading up to timeouts, the connection process
would have to wait for timeouts on all IPv6 target addresses before
attempting any IPv4 address.
Similar to what RFC 8305 suggests, reorder the list of addresses to
try connecting to, interleaving address families. After starting one
connection attempt, start another one in parallel after a small delay
(200 ms as suggested by the RFC).
For cases with unreliable IPv6 but reliable IPv4, this should make
connection attempts work as reliably as with plain IPv4, with only an
extra 200 ms of connection delay.
Andrey Utkin [Thu, 23 Oct 2014 16:55:46 +0000 (20:55 +0400)]
http: pass return code from http_open_cnx_internal() on its failure
Previously, AVERROR(EIO) was returned on failure of
http_open_cnx_internal(). Now the value is passed to upper level, thus
it is possible to distinguish ECONNREFUSED, ETIMEDOUT, ENETUNREACH etc.
wm4 [Wed, 8 Feb 2017 08:53:26 +0000 (09:53 +0100)]
avconv: make sure packets put into the muxing FIFO are refcounted
Some callers (like do_subtitle_out(), or do_streamcopy()) call this
with an AVPacket that is not refcounted. This can cause undefined
behavior.
Calling av_packet_move_ref() does not make a packet refcounted if it
isn't yet. (And it can't be made to, because it always succeeds,
and can't return ENOMEM.)
Call av_packet_ref() instead to make sure it's refcounted.
Cc: libav-stable@libav.org Signed-off-by: Martin Storsjö <martin@martin.st>
Current implementations of qsv components incorrectly work with async level, they
actually try to work in async+1 level stepping into MFX_WRN_DEVICE_BUSY and polling
loop. This change address this misbehaviour.
Zhong Li [Thu, 7 Jun 2018 08:51:54 +0000 (16:51 +0800)]
qsvenc: remove vcm option on Linux
1. vcm mode is only available for H264.
2. vcm is not supported on Linux, but it is shown when run "./avconv -h
encoder=h264_qsv |grep vcm". This shouldn't happen.
Signed-off-by: Zhong Li <zhong.li@intel.com> Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Zhong Li [Wed, 23 May 2018 10:01:32 +0000 (18:01 +0800)]
qsvenc: Add an option to disable MFE mode
Provide proper aliases to enable/disable MFE.
The numeric values are ambiguous and misleading (e.g: user may misunderstand
setting mfmode to 1 is to enable MFE but actually it is to disable MFE, and
set it to be 5 or above is meaningless).
MFX_MF_MANUAL hasn't been exposed since it is to be implemented.
Signed-off-by: Zhong Li <zhong.li@intel.com> Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
Zhong Li [Sat, 7 Apr 2018 17:38:55 +0000 (19:38 +0200)]
lavc/qsvdec: set complete_frame flags for progressive picture
Set the flag MFX_BITSTREAM_COMPLETE_FRAME when it is a progressive picture.
This can fix vc1 decoding segment fault issues because can't set the start
code correctly.
v2: fix some h264 interlaced clips regression
a. field_order of some h264 interlaced video (e.g: cama3_vtc_b.avc) is marked as AV_FIELD_UNKNOWN
in h264_parser.c. This is not a completed frames.
So only set the MFX_BITSTREAM_COMPLETE_FRAME when it is progressive.
b. some clips have both progressive and interlaced frames (e.g.CAPAMA3_Sand_F.264),
the parsed field_order maybe changed druing the decoding progress.
This patch has been verified for other codecs(mpeg2/hevc/vp8).
Signed-off-by: Zhong Li <zhong.li@intel.com> Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Zhong Li [Wed, 4 Apr 2018 09:51:30 +0000 (17:51 +0800)]
lavf/qsvvpp: bypass vpp if not needed.
Currently vpp pipeline is always created, even for the unnecessary
cases such as setting the option "vpp_qsv=w=1280:h=720" for an input
with native resolution 1280x720. Thus introduces unnecessary performance
dropping, so bypass vpp if not needed.
Signed-off-by: Zhong Li <zhong.li@intel.com> Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
Zhong Li [Wed, 4 Apr 2018 09:51:29 +0000 (17:51 +0800)]
lavc/qsvdec: expose frame pic_type and key_frame
Currently pict_type and key_frame are unset.
Add an extra param to fetch the picture type from qsv decoder
The judgement “key frame is equal to IDR frame” only suitable for H264.
For HEVC, all IRAP frames are key frames, and other codecs have no IDR
frame.
Signed-off-by: ChaoX A Liu <chaox.a.liu@intel.com> Signed-off-by: Zhong Li <zhong.li@intel.com> Signed-off-by: Maxym Dmytrychenko <maxim.d33@gmail.com>
projects / ffmpeg / log