subtitles.h has been included in order to use ff_subtitles_next_line()
to help parsing srt subtitles which at that time had their timing as
part of the payload and not as part of the AVPacket fields. When this
changed (in 55180b32) it has been forgotten to remove this header.
libavcodec/internal.h meanwhile has been added in bb47aa5850c and has
never been used at all.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avformat/hlsenc: Fix memleak when deleting old segments
if the directory name of the segments contains "%v".
This memleak is caused by masking the pointer that will eventually
be freed by a variable of the same name in a smaller scope.
Therefore the pointer that gets freed is always NULL when it is
freed and the allocated data leaks.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This is mainly about improving legibility of the code and getting rid of
overlong lines by using variables for st->codecpar instead of accessing
the codecparameters via st->codecpar->.
Also, some code has been moved to better fitting places.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
This commit removes data that is only used during smacker_read_header()
from the demuxer's context and replaces the data that is used by local
variables. The other data is completely dropped.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The Smacker demuxer currently parses several fields that indicate
how many audio streams a file contains. This data is parsed and stored
into arrays in the demuxer's context and although the data is used only
to initialize the audio streams, it is kept for the whole lifetime of
the demuxer.
This has been changed: The data is used directly to create
the audio streams and no longer kept at all.
This also simplifies error handling in case adding a new stream fails:
Several arrays which until now have been allocated between parsing the
data determining how many audio streams to create and actually creating
them would need to be freed in this case. Now the streams are created
first, so freeing is no longer an issue.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avformat/smacker: Read extradata directly into extradata
The Smacker demuxer reads four consecutive 32bit values from the file
header into its demux context (as four uint32_t), converting it to
native endianness in the process and then writing these four values
later (after extradata has been allocated) to extradata as four 32bit
values (converting to little endian in the process).
This commit changes this: The stream and the extradata are allocated
earlier, so that the data destined for extradata can be read directly
into extradata.
Furthermore, given that these values are not needed for demuxing itself
they are now no longer kept as part of the demuxing context.
Finally, a check regarding the number of frames has been moved up,
too, in order to exit early before unnecessarily allocating the
stream and the extradata.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avcodec/flacdsp_template: Fix invalid shifts in decorrelate
Fixes: left shift of negative value -2 Fixes: 20303/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_FLAC_fuzzer-5096829297623040 Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: signed integer overflow: 23170 * 95058 cannot be represented in type 'int' Fixes: 20295/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_MJPEG_fuzzer-5800212870463488 Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
avcodec/ffwavesynth: Correct undefined overflow of PINK_UNIT
Fixes: signed integer overflow: 9223372036854775775 + 128 cannot be represented in type 'long' Fixes: 20054/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_FFWAVESYNTH_fuzzer-5686385113825280 Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: building without muxers Fixes: 21594 Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
The WebM DASH Manifest muxer only supports VP8, VP9, Vorbis and Opus,
but there was no check for this. The codec type is used to get a pointer
to a string containing the codec name or NULL if it is not one of those
four codecs. Said pointer has then been used without further checks as
string for the %s conversion specifier in an avio_printf()) call which
is undefined behaviour.
This commit adds a check for the supported codec types.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Some broken apps generate files that have a fake box named 'hoov'
instead of a proper 'moov' one. This is speculation but it seems like
this box contains data to be modified later (eg as file grows in size,
data gets re-written) and its name is supposed to be changed to 'moov'
once it can be used as a 'moov', but for some reason this step is skipped.
Since this is not the first time this happens ('moov' boxes can be found
in 'free' ones) extend the existing hacks to search for the moov in such
boxes and skip the moov_retry since it needs to be found right away.
hwcontext_vulkan: only use one semaphore per image
The idea was to allow separate planes to be filtered independently, however,
in hindsight, literaly nothing uses separate per-plane semaphores and it
would only work when each plane is backed by separate device memory.
Carl Eugen Hoyos [Tue, 13 Aug 2019 10:42:27 +0000 (12:42 +0200)]
lavf/chromaprint: Silence compilation warnings
Fixes the following warnings:
libavformat/chromaprint.c:117:42: warning: passing argument 2 of ‘chromaprint_feed’ from incompatible pointer type
libavformat/chromaprint.c:132:52: warning: passing argument 2 of ‘chromaprint_get_raw_fingerprint’ from incompatible pointer type
libavformat/chromaprint.c:143:71: warning: passing argument 4 of ‘chromaprint_encode_fingerprint’ from incompatible pointer type
avformat/avidec: Fix memleak with embedded GAB2 subtitles
The code for GAB2 subtitles predates refcounting AVPackets. So in order
to transfer the ownership of a packet's data pkt->data was simply stored
and the packet zeroed; in the end (i.e. in the read_close-function) this
data was then simply freed with av_freep(). This of course leads to a leak
of an AVBufferRef and an AVBuffer. It has been fixed by keeping and
eventually unreferencing the packet's buf instead.
Additionally, the packet is now reset via av_packet_unref().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avformat/avidec: Fix memleak when DV demuxer is disabled
If one uses a build without dv demuxer, an AVIStream struct that is
destined to be used as private data for an AVStream by the avi demuxer
would leak, because it has been moved from the AVStream (that is going
to be freed) and only stored in a local variable (in order to be used
for another AVStream), but if the dv demuxer is disabled, the earlier
code returned immediately instead.
Also return a better error code in this scenario (instead of
AVERROR_INVALIDDATA).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Using ff_free_stream() makes the code more readable, more future-proof
(the old code freed AVCodecContexts and AVCodecParameters and its
substructures manually, so that there is a chance that there would be a
memleak for some time if new substructures were added) and reduces
code size.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
The commit lead to the use of an uninitialized variable.
Other issues were listed by Andreas Rheinhardt:
https://ffmpeg.org/pipermail/ffmpeg-devel/2020-March/259150.html
doc/general: AviSynth+ works on Linux now, AvxSynth is gone.
Related to this are the following changes:
* Mention the GNUmakefile that AviSynth+ provides for installing
just the headers.
* Expand on users installing AviSynth on their system a little
more.
AviSynth+ now supports non-Windows OSes, making AvxSynth
obsolete. Since we no longer support AviSynth 2.5 (which is
essentially what AvxSynth is), remove AvxSynth support and
replace it with AviSynth+.
As a result, the USING_AVISYNTH defines can be switched back
to generic _WIN32.
swscale/output: Fix integer overflow in yuv2rgb_write_full() with out of range input
Fixes: signed integer overflow: 1169365504 + 981452800 cannot be represented in type 'int' Fixes: ticket8293 Found-by: Suhwan Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
swscale/output: Fix integer overflow in alpha computation in yuv2gbrp16_full_X_c()
Fixes: signed integer overflow: 524280 * 4432 cannot be represented in type 'int' Fixes: ticket8322 Found-by: Suhwan Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Put a buffer with a known fixed size into the demuxer's context instead
of allocating it separately. This also allows to remove the demuxer's
read_close()-function.
Reviewed-by: Michael Niedermayer <michael@niedermayer.cc> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
8ffcc826 added support for muxing BlockAdditions with BlockAddID equal
to one. The restriction to BlockAddID == 1 probably resulted from
a limitation to what was needed; yet over time this led to three
occurences of "(side_data_size && additional_id == 1)". This commit
changes this by setting side_data_size to 0 if additional_id != 1.
It also stops hardcoding 1 for the value of BlockAddID to write;
but it still upholds the requirement that it is 1. See below.
Despite BlockAddId actually having a default value of 1, it is still
written, because until very recently (namely dbc50f8a) our demuxer
used a wrong default value of 0.
Furthermore, use put_ebml_binary() to write the BlockAdditional element.
(The Matroska specifications have evolved and now the BlockAddID 1 is
reserved for the codec (as described in the codec's codec mapping),
BlockMore elements with BlockAddID > 1 are now of a more
codec-independent nature and require a BlockAdditionalMapping in the
track's TrackEntry. Given that this muxer does not support writing said
BlockAdditionalMapping yet (actually, none have been defined yet), we
have to uphold the requirement that BlockAddID == 1.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avformat/matroskaenc: Improve checks for updating Tags
When updating the Tags at the end, the Matroska muxer would twice check
for whether (!mkv->is_live) is true, despite this code being only executed
if it is. Furthermore, a loop iterates over all the streams even when
there is no Tags element to update at all, because the check for whether
there are Tags is only performed later. This commit fixes this.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avio_close_dyn_buf() has a bug: When the write pointer does not point to
the end of the written data when calling it (i.e. when one has performed
a seek back to update already written data), it would not add padding to
the end of the buffer, but to the current position, overwriting other
data; furthermore the reported size would be wrong (off by the amount of
data it has overwritten with padding).
In order not to run into this when updating already written elements or
elements for which size has only been reserved, the Matroska muxer would
first record the current position of the dynamic buffer, then seek to
the desired position, perform the update and seek back to the earlier
position.
But now that end_ebml_master_crc32() does not make use of
avio_close_dyn_buf() any more, this is no longer necessary.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avformat/matroskaenc: Stop reallocating of Cluster buffer
The Matroska muxer uses a dynamic buffer to buffer the content of
Clusters before eventually writing them. Up until now, each time a
Cluster was written, the dynamic buffer was closed, i.e. freed; now it
is only reset, saving allocations of the AVIOContext itself, its opaque
as well as most of the reallocations of the buffer.
This is advantageous performance-wise, in particular on systems where
reallocations are slow (namely Windows). The following table shows the
decicyles for writing a frame on Linux (Ubuntu 19.10) and Windows (7)
on an x64 Haswell (to /dev/null on Linux, to stdout which is discarded
on Windows (the default values of the size and duration of clusters for
seekable output have been explicitly set in this case); in all tests,
writing CRC-32 values has been disabled in all tests; calls to the muxer's
write_packet function in write_packet() in libavformat/mux.c have been
timed; each of the following tests has been repeated 50 times):
| Windows before | Windows after | Linux before | Linux after
_________________________________________________________________
A | 979437 | 192304 | 259500 | 183320
B | 715936 | 155648 | 152786 | 130879
C | 265115 | 56034 | 78496 | 53243
D | 386224 | 80307 | 128894 | 75354
E | 21732 | 10695 | 11320 | 9801
(A is a 10.2 mb/s file with a GOP length of 2s, amounting to an average
Cluster size of about 2.5 MiB; the average Cluster size of B is 1.1 MiB;
for C it is 2.35 MiB, for D it is 0.46 MiB; for E - a file with just a
single audio track of 158kb/s resulting in a Cluster size of about 100
kB, the relative gains were the smallest, probably because of the small
Cluster size.)
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
John Rummell [Tue, 31 Mar 2020 04:30:33 +0000 (21:30 -0700)]
libavformat/amr.c: Check return value from avio_read()
If the buffer doesn't contain enough bytes when reading a stream,
fail rather than continuing on with initialized data. Caught by
Chromium fuzzeras (crbug.com/1065731).
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
David Michael [Wed, 1 Apr 2020 04:07:55 +0000 (00:07 -0400)]
configure: Do not abort when cross-compiling to the native CPU
Using a compiler with a different host triplet is considered
cross-compiling, even when it is for the same architecture as the
build system. With such a cross-compiler, it is still valid to
optimize builds with --cpu=host. Make the condition that aborts in
this case into a warning instead, since a cross-compiler for an
incompatible architecture will fail with -mtune=native anyway.
Signed-off-by: David Michael <fedora.dm0@gmail.com> Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
fate/matroska: Add test for updating CodecPrivate from packet sidedata
containing updated extradata, in this case a new FLAC streaminfo.
Furthermore, it also tests that the Matroska muxer is able to preserve
uncommon channel layouts by adding Vorbis comments to the CodecPrivate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avformat/hnm: Only keep and parse what is needed later
The hnm demuxer's context struct contained lots of fields that are
write-only variables or that are not used outside of parsing the header
and that can therefore be replaced by local variables of hnm_read_header().
This commit removes all of these from the context; the second type has
been replaced by local variables.
An AVPacket (that was initialized when reading the header and for which
dead code to unreference it existed in hnm_read_close()) is among the
removed things. Removing it allowed to remove hnm_read_close()
altogether and also removes another instance of usage of sizeof(AVPacket).
Reviewed-by: Paul B Mahol <onemda@gmail.com> Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avformat/matroskaenc: Don't implicitly mark WebVTT in WebM as English
Writing the language of WebVTT in WebM proceeded differently than the
language of all other tracks: In case no language was given, it does not
write anything instead of "und" (for undefined). Because the default
value of the Language element in WebM (that inherited it from Matroska)
is "eng" (for English), any such track will actually be flagged as
English.
Doing it this way goes back to commit 509642b4 (the commit adding
support for WebVTT) and no reason for this has been given in the commit
message or in the discussion about this patch on the mailing list; the
best I can think of is this: the WebM wiki contains "The srclang attribute
is stored as the Language sub-element." Someone unfamiliar with default
values in Matroska/WebM could interpret this as meaning that no Language
element should be written if the language is unknown. And this is wrong
and this commit changes it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
mkv_write_track() currently has three places where it checks for whether
the current codec type is audio: One in a switch and two outside of it.
These checks can be combined by moving the code after the other two checks
inside the audio-related part of the switch.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avformat/matroskaenc: Simplify writing Void elements
Reserving space in Matroska works by writing a Void element. And until
now this worked as follows: The current position was recorded and the
EBML ID as well as the length field written; then the new position was
recorded to know how much more to write. Afterwards the actual writing
has been performed via ffio_fill().
But it is unnecessary to explicitly use the positions (obtained via
avio_tell()) to find out how much still needs to be written, because the
length of the ID and the length field are known. So rewrite the function
to no longer use them.
Also, given that ffio_fill() uses an int parameter and given that no
current caller (and no sane future caller) will want to reserve several
GB of space, make the size parameter of put_ebml_void() itself an int.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
projects / ffmpeg / log