Without this metadata section the ffmpeg utility thinks that the AMF encoder
does not support input from D3D11 and DXVA2 hardware surfaces, causing
hardware pipelines to fail.
tools/target_dem_fuzzer: Consider it an EIO when reading position wraps around 64bit
Fixes: signed integer overflow: 9223372036854775807 + 564 cannot be represented in type 'long' Fixes: 26494/clusterfuzz-testcase-minimized-ffmpeg_dem_VOC_fuzzer-576754158849228 Fixes: 26549/clusterfuzz-testcase-minimized-ffmpeg_dem_AVS_fuzzer-4844306424397824
FIxes: 26875/clusterfuzz-testcase-minimized-ffmpeg_dem_C93_fuzzer-5996226782429184
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array access Fixes: 26816/clusterfuzz-testcase-minimized-ffmpeg_dem_MPEGTSRAW_fuzzer-6282861159907328.fuzz Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Reviewed-by: Marton Balint <cus@passwd.hu> Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array write Fixes: 26821/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ADPCM_SWF_fuzzer-5764465137811456 Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
This patch adds a select_region option to the xcbgrab input device.
If set to 1, the user will be prompted to select the grabbing area
graphically by clicking and dragging. A rectangle will be drawn to
mark the grabbing area. A single click with no dragging will select
the whole screen. The option overwrites the video_size, grab_x, and
grab_y options if set by the user.
For testing, just set the select_region option as follows:
The drawing happens directly on the root window using standard rubber
banding techniques, so it is very efficient and doesn't depend on any
X extensions or compositors.
During init the mts2 decoder allocates several VLCs and then several
buffers in a loop; if one of the latter allocations fails, only the VLCs
are freed, not any buffers that might already have been successfully
allocated. This commit fixes this by setting the
FF_CODEC_CAP_INIT_CLEANUP flag.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avformat/bintext: Check width in idf_read_header()
Fixes: division by 0 Fixes: 26802/clusterfuzz-testcase-minimized-ffmpeg_dem_IDF_fuzzer-5180591554953216.fuzz Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Bigger sizes are misinterpreted as negative numbers by the API Fixes: infinite loop Fixes: 26611/clusterfuzz-testcase-minimized-ffmpeg_dem_IFF_fuzzer-4890614975692800 Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
avformat/vividas: improve extradata packing checks in track_header()
Fixes: out of array accesses Fixes: 26622/clusterfuzz-testcase-minimized-ffmpeg_dem_VIVIDAS_fuzzer-6581200338288640 Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Zane van Iperen [Tue, 3 Nov 2020 13:41:53 +0000 (23:41 +1000)]
avformat/argo_brp: remove block_align check for audio
Causes a divide-by-zero in the rare case where:
- the file has an audio stream,
- the first audio frame isn't within the first BRP_BASF_LOOKAHEAD frames,
- an audio frame is encountered later, and
- its chunk header (except num_blocks) contains all zeros
(matching the uninitialised structure in the context)
The decoder will discard any garbage data, so the check isn't really needed.
Fixes: division by 0 Fixes: 26667/clusterfuzz-testcase-minimized-ffmpeg_dem_ARGO_BRP_fuzzer-5645146928185344.fuzz Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
avformat/apngdec: Check fcTL chunk length when reading header
Reading the header terminates when an fcTL chunk is encountered in which
case read_header returned success without checking the length of said
chunk. Yet when read_packet processes this chunk, it checks for the
length to be 26 and errors out otherwise. So do so when reading the header,
too.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
apng data consists of parts containing a small header (including a
four-byte size field) and a data part; the size field does not account
for everything and is actually twelve bytes short of the actual size. In
order to make sure that the size fits into an int, the size field is
checked for being > INT_MAX; yet this does not account for the + 12 and
upon conversion to int (which happens when calling append_extradata()),
the size parameter can still wrap around. In this case the currently
used check would lead to undefined signed integer overflow.
Furthermore, append_extradata() appends the new data to the already
existing extradata and therefore needs to make sure that the combined
size of new and old data as well as padding fits into an int. The check
used for this is "if (old_size > INT_MAX - AV_INPUT_BUFFER_PADDING_SIZE -
new_size)". If new_size is > INT_MAX - AV_INPUT_BUFFER_PADDING_SIZE
the right side becomes negative if the types are signed (as they are
now); yet changing this to "if (new_size > INT_MAX -
AV_INPUT_BUFFER_PADDING_SIZE - old_size)" is better as this also works
for unsigned types (where it is of course presumed that INT_MAX is
replaced by the corresponding maximum for the new type).
Both of these issues have been fixed.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avformat/apngdec: Return error for incomplete header
If avio_read() could read anything, it returns the number of bytes read,
even if it could not read as much as the caller desired.
apng_read_header() only checked the return value of its avio_read() calls
for being negative and this meant that it was possible for an incomplete
header to not be detected. The return value of the last successfull call
has been returned instead. This commit changes this.
Fixes: OOM Fixes: 26608/clusterfuzz-testcase-minimized-ffmpeg_dem_APNG_fuzzer-4839491644424192 Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com> Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out array read Fixes: 26610/clusterfuzz-testcase-minimized-ffmpeg_dem_CONCAT_fuzzer-5631838049271808 Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com> Reviewed-by: Nicolas George <george@nsup.org> Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
While the FATE suite contains a sample file for Musepack 8, it did not
use it to test the decoder; it is only used in the mpc8-demux test that
tests the demuxer via streamcopy. Therefore this commit adds an actual
encoder test.
The test uses the framecrc output, because Musepack SV8 is an encoder
that returns multiple frames for a single packet, so that timing
information in the test output is valueable. Output seeking has been
used in order to limit the size of the ref file as well as to test this
codepath for the first time.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
avformat/rsd: Check size and start before computing duration
Fixes: signed integer overflow: 100794754 * 28 cannot be represented in type 'int' Fixes: 26474/clusterfuzz-testcase-minimized-ffmpeg_dem_RSD_fuzzer-5181797606096896 Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
avformat/vividas: better check of current_sb_entry
This is the simplest fix for the problem, it is possible to instead check
this when the variables are set and propagate errors and then fail earlier
Fixes: out of array access Fixes: 26490/clusterfuzz-testcase-minimized-ffmpeg_dem_VIVIDAS_fuzzer-5723367078100992 Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
avcodec/utils: Check sample rate before use for AV_CODEC_ID_BINKAUDIO_DCT in get_audio_frame_duration()
Fixes: shift exponent 95 is too large for 32-bit type 'int' Fixes: 26590/clusterfuzz-testcase-minimized-ffmpeg_dem_SMACKER_fuzzer-5120609937522688 Reviewed-by: Peter Ross <pross@xvid.org> Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Jan Ekström [Sun, 20 Sep 2020 18:00:52 +0000 (21:00 +0300)]
ffmpeg: move field order decision making to encoder initialization
We now have the possibility of getting AVFrames here, and we should
not touch the muxer's codecpar after writing the header.
Results of FATE tests change as the MXF and Matroska muxers actually
write down the field/frame coding type of a stream in their
respective headers. Before this change, these values in codecpar
would only be set after the muxer was initialized. Now, the
information is also available for encoder and muxer initialization.
Jan Ekström [Thu, 10 Sep 2020 21:36:23 +0000 (00:36 +0300)]
ffmpeg: pass decoded or filtered AVFrame to output stream initialization
Additionally, reap the first rewards by being able to set the
color related encoding values based on the passed AVFrame.
The only tests that seem to have changed their results with this
change seem to be the MXF tests. There, the muxer writes the
limited/full range flag to the output container if the encoder
is not set to "unspecified".
Jan Ekström [Thu, 10 Sep 2020 21:25:21 +0000 (00:25 +0300)]
ffmpeg: move A/V non-streamcopy initialization to a later point
- For video, this means a single initialization point in do_video_out.
- For audio we unfortunately need to do it in two places just
before the buffer sink is utilized (if av_buffersink_get_samples
would still work according to its specification after a call to
avfilter_graph_request_oldest was made, we could at least remove
the one in transcode_step).
Other adjustments to make things work:
- As the AVFrame PTS adjustment to encoder time base needs the encoder
to be initialized, so it is now moved to do_{video,audio}_out,
right after the encoder has been initialized. Due to this,
the additional parameter in do_video_out is removed as it is no
longer necessary.
Jan Ekström [Thu, 15 Oct 2020 18:21:05 +0000 (21:21 +0300)]
ffmpeg: add a data size threshold for muxing queue size
This way the old max queue size limit based behavior for streams
where each individual packet is large is kept, while for smaller
streams more packets can be buffered (current default is at 50
megabytes per stream).
For some explanation, by default ffmpeg copies packets from before
the appointed seek point/start time and puts them into the local
muxing queue. Before, it getting utilized was much less likely
since as soon as the filter chain was initialized, the encoder
(and thus output stream) was also initialized.
Now, since we will be pushing the encoder initialization to when the
first AVFrame is decoded and filtered - which only happens after
the exact seek point is hit as packets are ignored until then -
this queue will be seeing much more usage.
In more layman's terms, this attempts to fix cases such as where:
- seek point ends up being 5 seconds before requested time.
- audio is set to copy, and thus immediately begins filling the
muxing queue.
- video is being encoded, and thus all received packets are skipped
until the requested time is hit.
The Canopus Lossless decoder uses several VLCs and if initializing the
ith VLC fails, all the VLCs 0..i have been freed; the ith VLC's table is
initialized to NULL for this purpose. Yet it is totally unnecessary to
free the ith VLC table at all: ff_init_vlc_sparse() cleans up after
itself on error and if an error happens before ff_init_vlc_sparse(),
the ith VLC hasn't been touched yet and doesn't need freeing.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
ruiquan.crq [Sat, 17 Oct 2020 15:17:14 +0000 (23:17 +0800)]
lavf/url: fix relative url parsing when the query string or fragment has a colon
This disallows the usage of ? and # in libavformat specific scheme options
(e.g. subfile,,start,32815239,end,0,,:video.ts) but this change was considered
acceptable.