]> git.sesse.net Git - ffmpeg/log
ffmpeg
10 years agoh264: parse two additional constraint flags
Vittorio Giovara [Wed, 19 Feb 2014 02:19:23 +0000 (03:19 +0100)]
h264: parse two additional constraint flags

10 years agoh264: add MVCD to the list of High profiles in SPS
Vittorio Giovara [Mon, 17 Feb 2014 12:55:15 +0000 (13:55 +0100)]
h264: add MVCD to the list of High profiles in SPS

Also comment all previous profiles.

10 years agolatm: Always reconfigure if no extradata was set previously
Hendrik Leppkes [Thu, 22 Dec 2011 23:14:32 +0000 (00:14 +0100)]
latm: Always reconfigure if no extradata was set previously

AAC LOAS can have new audio config objects in the stream itself.

Make sure the decoder reconfigures itself when the first one arrives
midstream.

Bug-Id: 644
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
10 years agoarm: dcadsp: implement decode_hf as external NEON asm
Janne Grunau [Sat, 22 Feb 2014 17:27:10 +0000 (18:27 +0100)]
arm: dcadsp: implement decode_hf as external NEON asm

10 years agodcadec: simplify decoding of VQ high frequencies
Christophe Gisquet [Fri, 14 Feb 2014 15:03:13 +0000 (15:03 +0000)]
dcadec: simplify decoding of VQ high frequencies

The vector dequantization has a test in a loop preventing effective SIMD
implementation. By moving it out of the loop, this loop can be DSPized.

Therefore, modify the current DSP implementation. In particular, the
DSP implementation no longer has to handle null loop sizes.

The decode_hf implementations have following timings:

For x86 Arrandale:
        C  SSE SSE2 SSE4
win32: 260 162  119  104
win64: 242 N/A   89   72

The arm NEON optimizations follow in a later patch as external asm. The
now unused check for the y modifier in arm inline asm is removed from
configure.

10 years agodca: factorize scaling in inverse ADPCM
Janne Grunau [Fri, 21 Feb 2014 12:13:36 +0000 (13:13 +0100)]
dca: factorize scaling in inverse ADPCM

Based on a patch from Christophe Gisquet.

Unrolling of the m == 0 case avoids a possible use of the uninitilized
value sum when s->predictor_history is not set. I failed to find a
sample for it. It also reduced the cycle count from 220 to 150 on
sandy bridge, x86_64 linux, gcc 4.8.2 compared to his patch.

10 years agox86: synth filter float: implement SSE2 version
Christophe Gisquet [Fri, 14 Feb 2014 15:03:09 +0000 (15:03 +0000)]
x86: synth filter float: implement SSE2 version

Timings for Arrandale:
          C    SSE
win32:  2108   334
win64:  1152   322

Factorizing the inner loop with a call/jmp is a >15 cycles cost, even with
the jmp destination being aligned.

Unrolling for ARCH_X86_64 is a 20 cycles gain.

Signed-off-by: Janne Grunau <janne-libav@jannau.net>
10 years agodcadsp: scan coefficients linearly in dca_lfe_fir
Christophe Gisquet [Fri, 14 Feb 2014 15:03:08 +0000 (15:03 +0000)]
dcadsp: scan coefficients linearly in dca_lfe_fir

This change is inspired by x86 asm where it frees a register.

Signed-off-by: Janne Grunau <janne-libav@jannau.net>
10 years agox86: dcadsp: implement SSE lfe_dir
Christophe Gisquet [Fri, 14 Feb 2014 15:03:07 +0000 (15:03 +0000)]
x86: dcadsp: implement SSE lfe_dir

Results for Arrandale/Windows:
32: 1670 -> 316
64:  728 -> 298

Signed-off-by: Janne Grunau <janne-libav@jannau.net>
10 years agodcadec: remove scaling in lfe_interpolation_fir
Christophe Gisquet [Fri, 14 Feb 2014 15:03:06 +0000 (15:03 +0000)]
dcadec: remove scaling in lfe_interpolation_fir

The scaling factor is constant so it is faster to scale the
FIR coefficients in the tables during compilation.

Signed-off-by: Janne Grunau <janne-libav@jannau.net>
10 years agoproresenc: Reuse proper dsputil infrastructure for FDCT
Diego Biurrun [Thu, 27 Feb 2014 22:49:55 +0000 (14:49 -0800)]
proresenc: Reuse proper dsputil infrastructure for FDCT

10 years agoprores: Drop DSP infrastructure for prores encoder bits
Diego Biurrun [Thu, 27 Feb 2014 22:49:54 +0000 (14:49 -0800)]
prores: Drop DSP infrastructure for prores encoder bits

None of the encoder bits are arch-optimized.

10 years agoproresenc: Drop unnecessary DCT permutation bits
Diego Biurrun [Thu, 27 Feb 2014 22:49:53 +0000 (14:49 -0800)]
proresenc: Drop unnecessary DCT permutation bits

No permutation is necessary for the FDCT.

10 years agoprores: Use consistent names for DSP arch initialization functions
Diego Biurrun [Thu, 27 Feb 2014 22:49:52 +0000 (14:49 -0800)]
prores: Use consistent names for DSP arch initialization functions

10 years agoGive IDCT matrix transpose macro a more descriptive name
Diego Biurrun [Tue, 18 Feb 2014 17:57:45 +0000 (09:57 -0800)]
Give IDCT matrix transpose macro a more descriptive name

This also avoids a macro name clash and related warning on ARM.

10 years agoaf_compand: add a dependency on strtok_r
Anton Khirnov [Wed, 26 Feb 2014 12:44:53 +0000 (13:44 +0100)]
af_compand: add a dependency on strtok_r

10 years agobuild: Do not redundantly specifiy H.263-related object files for MSMPEG4v*
Diego Biurrun [Wed, 19 Feb 2014 19:33:29 +0000 (20:33 +0100)]
build: Do not redundantly specifiy H.263-related object files for MSMPEG4v*

These are already covered through dependencies specified in configure.

10 years agolavfi: add compand audio filter
Andrew Kelley [Wed, 26 Feb 2014 06:47:40 +0000 (01:47 -0500)]
lavfi: add compand audio filter

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agoparser: cosmetics: Drop some unnecessary parentheses
Diego Biurrun [Tue, 25 Feb 2014 11:21:15 +0000 (12:21 +0100)]
parser: cosmetics: Drop some unnecessary parentheses

10 years agolibavfilter: example audio filtering program
Anton Khirnov [Thu, 13 Feb 2014 07:50:16 +0000 (08:50 +0100)]
libavfilter: example audio filtering program

Based on a patch by Andrew Kelley <superjoe30@gmail.com>

Signed-off-by: Diego Biurrun <diego@biurrun.de>
10 years agoparser: K&R formatting cosmetics
Luca Barbato [Sun, 23 Feb 2014 22:59:25 +0000 (23:59 +0100)]
parser: K&R formatting cosmetics

Signed-off-by: Diego Biurrun <diego@biurrun.de>
10 years agoparser: Remove commented-out cruft
Diego Biurrun [Tue, 25 Feb 2014 10:59:05 +0000 (11:59 +0100)]
parser: Remove commented-out cruft

10 years agotexi2pod: always declare the pod file as UTF-8 encoded
Janne Grunau [Mon, 24 Feb 2014 19:22:13 +0000 (20:22 +0100)]
texi2pod: always declare the pod file as UTF-8 encoded

10 years agodoc: fix one accented word
Vittorio Giovara [Mon, 24 Feb 2014 16:03:03 +0000 (17:03 +0100)]
doc: fix one accented word

10 years agodoc: name correct header
Vittorio Giovara [Mon, 24 Feb 2014 15:59:40 +0000 (16:59 +0100)]
doc: name correct header

10 years agoaf_volume: preserve frame properties
Anton Khirnov [Wed, 19 Feb 2014 19:55:27 +0000 (20:55 +0100)]
af_volume: preserve frame properties

10 years agoaf_resample: preserve frame properties
Anton Khirnov [Wed, 19 Feb 2014 19:42:39 +0000 (20:42 +0100)]
af_resample: preserve frame properties

10 years agoavconv: remove a write-only variable
Anton Khirnov [Wed, 19 Feb 2014 15:16:43 +0000 (16:16 +0100)]
avconv: remove a write-only variable

10 years agolibx265: Properly handled dynamic linking with MSVC
Derek Buitenhuis [Fri, 21 Feb 2014 17:11:00 +0000 (12:11 -0500)]
libx265: Properly handled dynamic linking with MSVC

Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
10 years agolibx265: Support SAR
Derek Buitenhuis [Fri, 21 Feb 2014 17:05:50 +0000 (12:05 -0500)]
libx265: Support SAR

Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
10 years agolibx265: Support 4:4:4
Derek Buitenhuis [Fri, 21 Feb 2014 16:59:13 +0000 (11:59 -0500)]
libx265: Support 4:4:4

Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
10 years agolibx265: Update API usage
Derek Buitenhuis [Fri, 21 Feb 2014 16:26:40 +0000 (11:26 -0500)]
libx265: Update API usage

Framerate is now a sane rational instead of an integer, and
inputDepth is changed to what it actually is.

Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
10 years agoUse av_frame_copy() to simplify code where appropriate.
Anton Khirnov [Tue, 11 Feb 2014 14:08:12 +0000 (15:08 +0100)]
Use av_frame_copy() to simplify code where appropriate.

10 years agolavc: use AVFrame API properly in ff_reget_buffer()
Anton Khirnov [Tue, 11 Feb 2014 13:59:00 +0000 (14:59 +0100)]
lavc: use AVFrame API properly in ff_reget_buffer()

10 years agoframe: add a convenience function for copying AVFrame data
Anton Khirnov [Tue, 11 Feb 2014 13:15:20 +0000 (14:15 +0100)]
frame: add a convenience function for copying AVFrame data

10 years agoavconv: support forcing codec tags for input streams
Anton Khirnov [Sun, 23 Feb 2014 07:05:52 +0000 (08:05 +0100)]
avconv: support forcing codec tags for input streams

10 years agox86: add detection for Bit Manipulation Instruction sets
James Almer [Sat, 22 Feb 2014 04:54:02 +0000 (04:54 +0000)]
x86: add detection for Bit Manipulation Instruction sets

Based on x264 code

Signed-off-by: James Almer <jamrial@gmail.com>
10 years agox86: add detection for FMA3 instruction set
James Almer [Sat, 22 Feb 2014 04:54:01 +0000 (04:54 +0000)]
x86: add detection for FMA3 instruction set

Based on x264 code

Signed-off-by: James Almer <jamrial@gmail.com>
10 years agox86: add missing XOP checks and macros
James Almer [Sat, 22 Feb 2014 04:54:00 +0000 (04:54 +0000)]
x86: add missing XOP checks and macros

Signed-off-by: James Almer <jamrial@gmail.com>
10 years agoconfigure: disable cpunop if the check fails
Janne Grunau [Sun, 23 Feb 2014 13:09:06 +0000 (14:09 +0100)]
configure: disable cpunop if the check fails

Moving cpunop from the HAVE_LIST to the ARCH_EXT_LIST_X86 has the side
effect of enabling it. The semantics of the check have to be changed
from enable if successful to disable if unsuccessful. This was missing
in 2b0bb69997c2416e74f41aa1400ce983bf8775c0 causing build errors with
nasm.

10 years agohevc: Do not left shift a negative value in hevc_loop_filter_chroma
Luca Barbato [Wed, 19 Feb 2014 20:56:35 +0000 (21:56 +0100)]
hevc: Do not left shift a negative value in hevc_loop_filter_chroma

10 years agohevc: Do not right shift a negative value in get_pcm
Luca Barbato [Wed, 19 Feb 2014 21:21:43 +0000 (22:21 +0100)]
hevc: Do not right shift a negative value in get_pcm

10 years agohevc: Drop unnecessary shifts in deblocking_filter_CTB
Luca Barbato [Wed, 19 Feb 2014 19:38:53 +0000 (20:38 +0100)]
hevc: Drop unnecessary shifts in deblocking_filter_CTB

beta_offset is pre-multiplied by 2.

10 years agolavr: return an error if a avresample_open() is called on an open context
Anton Khirnov [Thu, 25 Apr 2013 18:12:47 +0000 (20:12 +0200)]
lavr: return an error if a avresample_open() is called on an open context

10 years agolavr: add a function for checking whether AVAudioResampleContext is open
Anton Khirnov [Thu, 25 Apr 2013 18:08:49 +0000 (20:08 +0200)]
lavr: add a function for checking whether AVAudioResampleContext is open

10 years agoh264: Fix a typo from the previous commit
Luca Barbato [Sat, 22 Feb 2014 10:19:03 +0000 (11:19 +0100)]
h264: Fix a typo from the previous commit

f777504f640260337974848c7d5d7a3f064bbb45 changed a - in +

CC: libav-stable@libav.org
10 years agomxf: Add DNxHD UL
Tomas Härdin [Sat, 10 Mar 2012 16:03:00 +0000 (17:03 +0100)]
mxf: Add DNxHD UL

Note that the old DNxHD UL is actually JPEG 2000 according to RP224.
Leaving it as-is for now.

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
10 years agomxf: Add uncompressed 422 8-bit rawvideo UL
Philip de Nier [Tue, 28 Feb 2012 14:16:37 +0000 (14:16 +0000)]
mxf: Add uncompressed 422 8-bit rawvideo UL

Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
10 years agolibvorbis: Give consistent names to all functions, structs, and defines
Diego Biurrun [Fri, 21 Feb 2014 10:08:09 +0000 (11:08 +0100)]
libvorbis: Give consistent names to all functions, structs, and defines

10 years agoh264: Lower bound check for slice offsets
Vittorio Giovara [Thu, 20 Feb 2014 01:38:32 +0000 (02:38 +0100)]
h264: Lower bound check for slice offsets

And use the value from the specification.

Sample-Id: 00000451-google
Found-by: Mateusz j00ru Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
Signed-off-by: Luca Barbato <lu_zero@gentoo.org>
10 years agoavconv: Do not divide by zero
Luca Barbato [Wed, 19 Feb 2014 20:41:12 +0000 (21:41 +0100)]
avconv: Do not divide by zero

10 years agoconfigure: Add usan to the toolchain presets
Luca Barbato [Wed, 19 Feb 2014 19:20:39 +0000 (20:20 +0100)]
configure: Add usan to the toolchain presets

clang-3.4 and gcc-4.9 have it.

10 years agoconfigure: Move cpunop into ARCH_EXT_LIST_X86
Diego Biurrun [Sat, 2 Nov 2013 16:21:52 +0000 (17:21 +0100)]
configure: Move cpunop into ARCH_EXT_LIST_X86

It is a processor feature, so it belongs there.

10 years agoconfigure: Move inet_aton check into network function check block
Diego Biurrun [Sat, 2 Nov 2013 16:21:50 +0000 (17:21 +0100)]
configure: Move inet_aton check into network function check block

10 years agoaarch64: use EXTERN_ASM consistently for exported symbols
Janne Grunau [Fri, 7 Feb 2014 15:05:50 +0000 (16:05 +0100)]
aarch64: use EXTERN_ASM consistently for exported symbols

Based on e3fec3f095ab5ea08ee662942d98526aaf5e3635 for arm.

10 years agox86: float dsp: unroll SSE versions
Christophe Gisquet [Fri, 14 Feb 2014 15:03:12 +0000 (15:03 +0000)]
x86: float dsp: unroll SSE versions

vector_fmul and vector_fmac_scalar are guaranteed that they can process in
batch of 16 elements, but their SSE versions only does 8 at a time.

Therefore, unroll them a bit.
299 to 261c for 256 elements in vector_fmac_scalar on Arrandale/Win64.

Signed-off-by: Janne Grunau <janne-libav@jannau.net>
10 years agodca: replace some memcpy by AV_COPY128
Christophe Gisquet [Fri, 14 Feb 2014 15:03:10 +0000 (15:03 +0000)]
dca: replace some memcpy by AV_COPY128

Signed-off-by: Janne Grunau <janne-libav@jannau.net>
10 years agoh264: avoid undefined behavior in chroma motion compensation
Janne Grunau [Fri, 14 Feb 2014 16:00:06 +0000 (17:00 +0100)]
h264: avoid undefined behavior in chroma motion compensation

Makes fate-h264 pass under valgrind --undef-value-errors=yes with
-cpuflags none. {avg,put}_h264_chroma_mc8_8 approximately 5% faster,
{avg,put}_h264_chroma_mc4_8 2% faster both on x86 and arm.

10 years agompeg4video_parser: Drop pointless av_-prefix from static function
Diego Biurrun [Thu, 20 Feb 2014 10:27:21 +0000 (02:27 -0800)]
mpeg4video_parser: Drop pointless av_-prefix from static function

10 years agoavcodec: Consistently name encoder init functions foo_encode_init
Diego Biurrun [Thu, 6 Feb 2014 17:29:51 +0000 (18:29 +0100)]
avcodec: Consistently name encoder init functions foo_encode_init

10 years agox86: dsputil: Use correct file name as multiple inclusion guard
Diego Biurrun [Mon, 23 Dec 2013 15:39:36 +0000 (16:39 +0100)]
x86: dsputil: Use correct file name as multiple inclusion guard

10 years agobit_depth_template: Use file name as multiple inclusion guard
Diego Biurrun [Sun, 22 Dec 2013 13:19:28 +0000 (14:19 +0100)]
bit_depth_template: Use file name as multiple inclusion guard

10 years agosvq3: Adjust #endif comment
Diego Biurrun [Tue, 28 Jan 2014 07:23:02 +0000 (08:23 +0100)]
svq3: Adjust #endif comment

10 years agobuild: The MPEG-4 video parser depends on h263dsp
Diego Biurrun [Wed, 19 Feb 2014 19:33:28 +0000 (20:33 +0100)]
build: The MPEG-4 video parser depends on h263dsp

The dependency is indirect through the h263/mpegvideo code.
CC: libav-stable@libav.org
10 years agolibavformat/mpegts: expose raw packet size
Leandro Dorileo [Fri, 31 Jan 2014 16:48:11 +0000 (14:48 -0200)]
libavformat/mpegts: expose raw packet size

We cannot easily determine if an mpeg TS's packet size is DVHS, FEC
or so on, for that we need to expose the internal raw_packet_size
field.

Signed-off-by: Anton Khirnov <anton@khirnov.net>
10 years agoAVOptions: add flags for read/read-only options
Anton Khirnov [Sat, 15 Feb 2014 07:24:23 +0000 (08:24 +0100)]
AVOptions: add flags for read/read-only options

10 years agoAVOptions: deprecate unused AV_OPT_FLAG_METADATA
Anton Khirnov [Sat, 15 Feb 2014 07:14:03 +0000 (08:14 +0100)]
AVOptions: deprecate unused AV_OPT_FLAG_METADATA

It was never used since it was added and the things it was intended for
are now exported differently.

10 years agohevc: Always consider VLC NALU type mismatch fatal
Luca Barbato [Tue, 18 Feb 2014 22:58:59 +0000 (23:58 +0100)]
hevc: Always consider VLC NALU type mismatch fatal

Sample-Id: 00001667-google
Reported-by: Mateusz "j00ru" Jurczyk and Gynvael Coldwind
CC: libav-stable@libav.org
10 years agohevc: Mention the missing SPS in the error message
Luca Barbato [Tue, 18 Feb 2014 22:55:29 +0000 (23:55 +0100)]
hevc: Mention the missing SPS in the error message

10 years agodoc: Name the MOV muxer as it should be called
Luca Barbato [Tue, 18 Feb 2014 20:57:12 +0000 (21:57 +0100)]
doc: Name the MOV muxer as it should be called

The section name is the muxer, not the format.

10 years agodoc: Sort the muxer documentation
Luca Barbato [Tue, 18 Feb 2014 16:12:30 +0000 (17:12 +0100)]
doc: Sort the muxer documentation

Keep the sections alphabetically sorted.

10 years agothreads: Check w32threads dependencies at the configure stage
Diego Biurrun [Wed, 18 Dec 2013 21:29:25 +0000 (22:29 +0100)]
threads: Check w32threads dependencies at the configure stage

Also add warning comment about threading implementations without matching
atomics implementation to the atomics fallback implementation.

10 years agovf_interlace: deprecate lowpass option
Vittorio Giovara [Fri, 14 Feb 2014 04:57:47 +0000 (05:57 +0100)]
vf_interlace: deprecate lowpass option

10 years agox86: dca: Add missing multiple inclusion guards
Diego Biurrun [Tue, 18 Feb 2014 13:30:04 +0000 (14:30 +0100)]
x86: dca: Add missing multiple inclusion guards

10 years agogitignore: Add all examples below doc/examples
Diego Biurrun [Tue, 18 Feb 2014 17:37:48 +0000 (18:37 +0100)]
gitignore: Add all examples below doc/examples

10 years agomovenc: Add a fallback fragmentation method for plain mp4 as well
Martin Storsjö [Tue, 18 Feb 2014 14:11:59 +0000 (16:11 +0200)]
movenc: Add a fallback fragmentation method for plain mp4 as well

Previously the default fragmentation method was only enabled
if writing an ISM file.

Signed-off-by: Martin Storsjö <martin@martin.st>
10 years agoarm: Mark the stack as non-executable
Martin Storsjö [Fri, 7 Feb 2014 14:22:54 +0000 (16:22 +0200)]
arm: Mark the stack as non-executable

If linking in an object file without this attribute set, the
linker will assume that an executable stack might be needed.

Signed-off-by: Martin Storsjö <martin@martin.st>
10 years agoh264: informative error reporting in decode_slice_header()
Luca Barbato [Tue, 18 Feb 2014 22:47:55 +0000 (23:47 +0100)]
h264: informative error reporting in decode_slice_header()

Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
10 years agoh264: fix slice_type value reported in decode_slice_header()
Luca Barbato [Tue, 18 Feb 2014 22:47:32 +0000 (23:47 +0100)]
h264: fix slice_type value reported in decode_slice_header()

Signed-off-by: Vittorio Giovara <vittorio.giovara@gmail.com>
10 years agodoxygen: Replace @parblock syntax with manual linebreaks
Diego Biurrun [Sun, 16 Feb 2014 21:09:30 +0000 (22:09 +0100)]
doxygen: Replace @parblock syntax with manual linebreaks

@parblock is only supported in very recent Doxygen versions.

10 years agodoxygen: Add a number of missing function parameter descriptions
Diego Biurrun [Sun, 16 Feb 2014 22:36:31 +0000 (23:36 +0100)]
doxygen: Add a number of missing function parameter descriptions

10 years agoh264: use avpriv_request_sample for chroma_format_idc
Vittorio Giovara [Sun, 16 Feb 2014 22:07:21 +0000 (23:07 +0100)]
h264: use avpriv_request_sample for chroma_format_idc

10 years agodoc: Fix project name typo
Diego Biurrun [Sun, 16 Feb 2014 21:08:21 +0000 (22:08 +0100)]
doc: Fix project name typo

10 years agoMove all example programs to doc/examples
Diego Biurrun [Sat, 15 Feb 2014 14:50:29 +0000 (15:50 +0100)]
Move all example programs to doc/examples

Also drop support for building examples in library directories.

10 years agog2meet: validate bpp and bitmasks in the display info
Maxim Poliakovski [Sat, 15 Feb 2014 20:09:22 +0000 (21:09 +0100)]
g2meet: validate bpp and bitmasks in the display info

Signed-off-by: Kostya Shishkov <kostya.shishkov@gmail.com>
10 years agoPrepare for 10_beta1 Release
Reinhard Tartler [Sat, 15 Feb 2014 21:49:04 +0000 (16:49 -0500)]
Prepare for 10_beta1 Release

10 years agoac3dec: set AV_FRAME_DATA_DOWNMIX_INFO side data.
Tim Walker [Sat, 15 Feb 2014 17:38:15 +0000 (17:38 +0000)]
ac3dec: set AV_FRAME_DATA_DOWNMIX_INFO side data.

10 years agolavu: add AV_FRAME_DATA_DOWNMIX_INFO side data type.
Tim Walker [Sat, 15 Feb 2014 17:12:22 +0000 (17:12 +0000)]
lavu: add AV_FRAME_DATA_DOWNMIX_INFO side data type.

10 years agoac3: update AC3PreferredStereoDownmixMode.
Tim Walker [Sat, 15 Feb 2014 17:12:21 +0000 (17:12 +0000)]
ac3: update AC3PreferredStereoDownmixMode.

'11b' is reserved in the A/52 specification,
but newer encoders use it to indicate a Dolby
Pro Logic II compatible Lt/Rt downmix.

10 years agoh264_parser: use enum values in h264_find_frame_end()
Vittorio Giovara [Fri, 14 Feb 2014 04:20:02 +0000 (05:20 +0100)]
h264_parser: use enum values in h264_find_frame_end()

10 years agolavfi doxy: add buffer{src,sink}.h to the main lavfi doxy group
Anton Khirnov [Mon, 10 Feb 2014 16:25:21 +0000 (17:25 +0100)]
lavfi doxy: add buffer{src,sink}.h to the main lavfi doxy group

10 years agobuffersink: document special error codes returned from av_buffersink_get_frame
Anton Khirnov [Tue, 21 May 2013 18:30:36 +0000 (20:30 +0200)]
buffersink: document special error codes returned from av_buffersink_get_frame

10 years agoppc: reduce overreads when loading 8 pixels in altivec dsp functions
Janne Grunau [Thu, 13 Feb 2014 11:27:17 +0000 (12:27 +0100)]
ppc: reduce overreads when loading 8 pixels in altivec dsp functions

Altivec can only load naturally aligned vectors. To handle possibly
unaligned data a second vector is loaded from an offset of the original
location and the data is recovered through a vector permutation.
Overreads are minimal if the offset for second load points to the last
element of data. This is 7 for loading eight 8-bit pixels and overreads
are reduced from 16 bytes to 8 bytes if the pixels are 64-bit aligned.
For unaligned pixels the overread is reduced from 23 bytes to 15 bytes
in the worst case.

10 years agoutvideoenc: Enable support for multiple slices and use them
Jan Ekström [Fri, 14 Feb 2014 11:48:56 +0000 (12:48 +0100)]
utvideoenc: Enable support for multiple slices and use them

The official Ut Video decoder only threads with slices, thus until
now any files encoded by the libavcodec encoder have only been
decodable with a single thread. The default slice count is now
set to subsampled_height / 120.

Also sets slices to 1 for the Ut Video encoder tests to keep them
green.

Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
10 years agolibx265: Remove redundant default param call
Derek Buitenhuis [Thu, 13 Feb 2014 20:49:24 +0000 (20:49 +0000)]
libx265: Remove redundant default param call

Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
10 years agolibx265: Fix use of uninitialized input picture
Derek Buitenhuis [Thu, 13 Feb 2014 20:49:05 +0000 (20:49 +0000)]
libx265: Fix use of uninitialized input picture

Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
10 years agodoc/examples: misc Doxygen markup improvements
Diego Biurrun [Tue, 11 Feb 2014 14:49:39 +0000 (15:49 +0100)]
doc/examples: misc Doxygen markup improvements

Add properly formatted @example tag and fix Doxygen syntax.

10 years agobuild: doxy: Include code examples in Doxygen documentation
Diego Biurrun [Tue, 11 Feb 2014 17:38:03 +0000 (18:38 +0100)]
build: doxy: Include code examples in Doxygen documentation

10 years agodoxygen: Set EXAMPLE_PATH from within doxy-wrapper.sh
Diego Biurrun [Tue, 11 Feb 2014 20:31:58 +0000 (21:31 +0100)]
doxygen: Set EXAMPLE_PATH from within doxy-wrapper.sh

This allows using the libav source path as the example path.

10 years agobuild: Do not pass HTML snippets and stylesheet as input to Doxygen
Diego Biurrun [Tue, 11 Feb 2014 16:30:43 +0000 (17:30 +0100)]
build: Do not pass HTML snippets and stylesheet as input to Doxygen

These files are referenced elsewhere and only generate warnings if
presented to Doxygen as input files.