-XCOMM $XFree86: xc/config/cf/xf86site.def,v 3.101.2.15 1998/02/24 19:05:42 hohndel Exp $
-/******************************************************************************/
-/*
- * This file is to provide a quick method for most people to change the
- * behaviour of their XFree86 installation without having to fully
- * understand the workings of site.def and all the various '.cf' files.
- *
- * These are the most common settings you would choose for compiling and
- * installing XFree86 on the systems supported by it.
- *
- * A good way to use this file is to copy it to host.def, and make the
- * changes there. That way, future patches to this file won't fail.
- * The host.def file will never be patched.
- *
- * The distributed version of this file should contain no uncommented
- * definitions. Such default definitions belong in xfree86.cf.
- */
-/******************************************************************************/
-
-/*
- * If you have build-specific modifications in your host.def file, but
- * want an empty host.def file installed when doing 'make install',
- * uncomment the following
- *
-#define InstallEmptyHostDef
- */
-
-/*
- * If using GCC 2.x on a system where it isn't the default, uncomment
- * the following
- *
-#define HasGcc2 YES
-#define HasGcc YES
- */
-
-/*
- * If using GCC 2.x with C++ on a system where it isn't the default, uncomment
- * the following.
- *
-#define HasGcc2ForCplusplus YES
- */
-
-/*
- * The default optimisation flags for GCC 2.x. -fno-strength-reduce is
- * here to work around a bug in -O2 for GCC 2.x on i386 platforms.
- * If you are using a version that doesn't have this bug, you can
- * uncomment the following line, and remove '-fno-strength-reduce'
- * If you are building binaries for a 486, it may be beneficial to add
- * -m486
- *
-#define DefaultGcc2i386Opt -O2 -fno-strength-reduce
- */
-
-/*
- * For Linux, this should match the Binutils version you have. This example
- * is for 2.6.0.7. See linux.cf for the default setting.
- *
- * This should automatically get set correctly by imake.
- *
-#define LinuxBinUtilsMajorVersion 26
- */
-
-/*
- * For Linux, these should match the libc version you have. This example
- * is for libc.5.4.x. See linux.cf for the default setting.
- *
- * This should automatically get set correctly by imake.
- *
-#define LinuxCLibMajorVersion 5
-#define LinuxClibMinorVersion 4
- */
-
-/*
- * If you want to use the GNU malloc library, uncomment this
- *
-#define UseGnuMalloc YES
- */
-
-/*
- * Set this to whatever is required to access the GNU malloc library.
- * The default is '-lgmalloc' unless is specified in the OS's .cf file.
- *
-#define GnuMallocLibrary -L/usr/local/lib -lgmalloc
- */
-
-/*
- * To disable the internal Xserver malloc, set this to NO
- *
-#define UseInternalMalloc YES
- */
-
-/*
- * Some Linux releases don't have a libtermcap. In this case you may need
- * to uncomment the following
- *
-#define TermcapLibrary -lncurses
- */
-
-/*
- * If you have Tk (which is required to build XF86Setup), uncomment this
- * Note: version 4.0 or 4.1 is required, and XF86Setup links it statically by
- * default.
- *
-#define HasTk YES
- */
-
-/*
- * Set the paths and names for your Tk library if they don't match the
- * defaults (check your OS .cf file or Imake.tmpl for the defaults).
- *
- * Common values for TkLibName are tk4.0, tk4.1, etc.
- *
- * Some Linux releases need TkIncDir set to /usr/include/tcl, and some
- * need it set to /usr/X11R6/include.
- *
- * Some Linux releases need TkLibDir set to /usr/X11R6/lib
- *
-#define TkLibDir /usr/local/lib
-#define TkIncDir /usr/local/include
-#define TkLibName tk
- */
-
-/*
- * By default, XF86Setup is linked with a static Tk library. To change
- * that, uncomment the following line.
- *
-#define XF86SetupUsesStaticTk NO
- */
-
-/*
- * If you have Tcl (which is required to build XF86Setup), uncomment this
- * Note: version 7.4 or 7.5 is required, and XF86Setup links it statically by
- * default.
- *
-#define HasTcl YES
- */
-
-/*
- * Set the paths and names for your Tcl library if they don't match the
- * defaults (check your OS .cf file or Imake.tmpl for the defaults).
- *
- * Common values for TclLibName are tcl7.4, tcl7.5, etc.
- *
- * Some Linux releases need TclIncDir set to /usr/include/tcl.
- *
-#define TclLibDir /usr/local/lib
-#define TclIncDir /usr/local/include
-#define TclLibName tcl
- */
-
-/*
- * By default, XF86Setup is linked with a static Tcl library. To change
- * that, uncomment the following line.
- *
-#define XF86SetupUsesStaticTcl NO
- */
-
-/*
- * Which servers do you wish to build, you can save a lot of disk space
- * by only compiling the server you will be using. It will also save you
- * considerable compile time.
- *
- * The following servers are supported in Intel x86 platforms
- *
-#define XF86SVGAServer NO
-#define XF86VGA16Server NO
-#define XF86VGA16DualServer NO
-#define XF86MonoServer NO
-#define XF86MonoDualServer NO
-#define XF86S3Server NO
-#define XF86S3VServer NO
-#define XF86I8514Server NO
-#define XF86Mach8Server NO
-#define XF86Mach32Server NO
-#define XF86Mach64Server NO
-#define XF86P9000Server NO
-#define XF86AGXServer NO
-#define XF86W32Server NO
-#define XF86I128Server NO
- */
-
-/*
- * Which servers do you wish to build, you can save a lot of disk space
- * by only compiling the server you will be using. It will also save you
- * considerable compile time.
- *
- * The following servers are supported on Digital Alpha platforms:
- *
-#define XF86SVGAServer NO
-#define XF86MonoServer NO
-#define XF86S3Server NO
-#define XF86S3VServer NO
-#define XF86P9000Server NO
-#define XF86TGAServer NO
- */
-
-/*
- * Which servers do you wish to build, you can save a lot of disk space
- * by only compiling the server you will be using. It will also save you
- * considerable compile time.
- *
- * The following server is supported on Mips/Arc platforms:
- *
-#define XF86S3Server NO
- */
-
-/*
- * PC98 X servers
- *
- * Uncommenting the following automatically enables all PC98 servers
- *
-#define BuildPC98Servers YES
- */
-
-/*
- * To enable/disable individual PC98 servers, use these
- *
-#define XF98EGCServer YES
-#define XF98GANBWAPServer YES
-#define XF98NEC480Server YES
-#define XF98NKVNECServer YES
-#define XF98WABSServer YES
-#define XF98WABEPServer YES
-#define XF98WSNAServer YES
-#define XF98TGUIServer YES
-#define XF98MGAServer YES
-#define XF98SVGAServer YES
-#define XF98NECS3Server YES
-#define XF98PWSKBServer YES
-#define XF98PWLBServer YES
-#define XF98GA968Server YES
- */
-
-/*
- * The following server is supported on Motorola 68k platforms:
- *
-#define XF68FBDevServer NO
- */
-
-/*
- * To disable building the Xnest server, uncomment this.
- *
-#define XnestServer NO
- */
-
-/*
- * To disable building Xvfb, uncomment this.
- *
-#define XVirtualFramebufferServer NO
- */
-
-/*
- * Set the default server (ie the one that gets the sym-link to "X")
- *
-#define ServerToInstall XF86_S3
- */
-
-
-/*
- * Server configuration parameters. The defaults are shown here:
- */
-
-/*
- * SVGA server:
- *
-#define XF86SvgaDrivers nv et4000 et3000 pvga1 gvga ati sis tvga8900 \
- cirrus ncr77c22 compaq mga oak al2101 ali \
- cl64xx video7 ark mx realtek apm \
- s3v s3_svga chips generic
- */
-
-/*
- * VGA16 server:
- *
-#define XF86Vga16Drivers et4000 et3000 ncr77c22 ati sis tvga8900 oak \
- cl64xx generic
- */
-
-/*
- * VGA2 driver in Mono server:
- *
-#define XF86Vga2Drivers et4000 et3000 pvga1 gvga ati sis tvga8900 \
- cirrus ncr77c22 oak cl64xx generic
- */
-
-/*
- * Mono driver in Mono or VGA16 server:
- *
-#define XF86MonoDrivers hgc1280 sigma apollo hercules
- */
-
-/*
- * ET4000/W32 server:
- *
-#define XF86W32Drivers et4000w32
- */
-
-/*
- * BSD Console driver support (for FreeBSD and NetBSD).
- *
- * By default, support is included for pccons and pcvt for NetBSD, and
- * pccons, syscons and pcvt for FreeBSD.
- *
- * To change the list of supported drivers, set the following parameter.
- * Possible values are -DPCCONS_SUPPORT, -DSYSCONS_SUPPORT, -DPCVT_SUPPORT,
- * -DCODRV_SUPPORT. The following example includes support for syscons and
- * pcvt only.
- *
-#define XFree86ConsoleDefines -DSYSCONS_SUPPORT -DPCVT_SUPPORT
- */
-
-/*
- * The X servers need to run as root on most OSs. We're now using a
- * wrapper in that case, but we still need to make it known that the
- * servers need SetUID. When only using xdm, this (and the wrapper)
- * are not required. Disabling this automatically disables use of the
- * wrapper.
- *
- * If you're only starting the Xservers with xdm set this to NO
- *
-#define XserverNeedsSetUID NO
- */
-
-/*
- * To disable building the font server, uncomment this.
- *
-#define BuildFontServer NO
- */
-
-/*
- * Do you want to Build Fonts (Usually you only want to build and install
- * fonts once, if this is a first time install you will want to build the
- * fonts)
- *
-#define BuildFonts NO
- */
-
-/*
- * To not build/install the 75dpi fonts, uncomment the following
- *
-#define Build75DpiFonts NO
- */
-
-/*
- * To not build/install the 100dpi fonts, uncomment the following
- *
-#define Build100DpiFonts NO
- */
-
-/*
- * To not build/install the Speedo fonts, uncomment the following
- *
-#define BuildSpeedoFonts NO
- */
-
-/*
- * To not build/install the Type1 fonts, uncomment the following
- *
-#define BuildType1Fonts NO
- */
-
-/*
- * To not build/install the Cyrillic fonts, uncomment the following
- *
-#define BuildCyrillicFonts NO
- */
-
-/*
- * To build only the servers with a cut-down source tree, uncomment
- * this.
- *
-#define BuildServersOnly YES
- */
-
-/*
- * To disable building XInput support, uncomment this
- *
-#define BuildXInputExt NO
- */
-
-/*
- * Select the XInput devices you want by setting them to YES.
- *
- * Note: Joystick support is only included for Linux and FreeBSD at the
- * moment. For Linux it requires the Joystick module to be installed (it
- * isn't part of the standard kernel distribution). For FreeBSD, a kernel
- * will need to be built with the Joystick driver in order to be able to
- * use this.
- *
-#define JoystickSupport NO
-#define WacomSupport YES
-#define ElographicsSupport YES
-#define SummaSketchSupport YES
- */
-
-/*
- * if your system supports dynamic loading of modules using
- * dlopen set this to YES.
- *
-#define BuildDynamicLoading YES
- */
-
-/*
- * To disable the ScreenSaver Extension, uncomment this line.
- *
-#define BuildScreenSaverExt NO
- */
-
-/*
- * If you don't want to build PEX, uncomment this.
- *
-#define BuildPexExt NO
- */
-
-/*
- * If you don't want to build XIE, uncomment this.
- *
-#define BuildXIE NO
- */
-
-/*
- * If you don't want to build support for an external GLX server module or
- * library, uncomment this.
- *
- * NOTE: XFree86 3.3 does not include GLX server source, module, or
- * functional libraries. Building in support does not require
- * availability of a GLX package, but will allow it to be used
- * when released (by dynamic load or relinking).
- *
-#define BuildGlxExt NO
- */
-
-/*
- * If you aren't building with support for loadable modules and wish
- * to statically link external GLX server libs instead of the default
- * non-functional stub library, uncomment the following define and
- * specify the space-seperated pathnames of those libraries here.
- *
-#define GlxStaticServerLib /full/path/name/to/glx/servGL/libServerGlx.a \
- /full/path/name/to/glx/servGL/libMesaGlx.a
- */
-
-/*
- * If you want to build only the DIS (Document Imaging Subset of XIE)
- * uncomment this line. This option is only relevant when XIE is built.
- *
-#define BuildDIS YES
- */
-
-/*
- * By default, the sample config files for xinit, xdm and xfs are installed
- * only when there is no pre-existing version installed. Uncommenting the
- * following lines will force the sample versions to be installed even if
- * it means over-writing existing versions.
- *
-#define InstallXinitConfig YES
-#define InstallXdmConfig YES
-#define InstallFSConfig YES
- */
-
-/*
- * By default the application defaults files are always installed.
- * Uncommenting the the following will prevent exising application
- * defaults files from being over-written.
- *
-#define InstallAppDefFiles NO
- */
-
-/*
- * If you are running Solaris x86, and want to disable building support
- * for the aperture driver, uncomment this.
- *
-#define HasSolx86ApertureDriver NO
- */
-
-/*
- * If you are running NetBSD 0.9C or later, or OpenBSD and want to disable
- * building support for the NetBSD aperture driver, uncomment this.
- *
-#define HasNetBSDApertureDriver NO
- */
-
-/*
- * If you are running SVR3 and have the mmap driver installed (for linear
- * framebuffer access) uncomment this.
- *
-#define HasSVR3mmapDrv YES
- */
-
-/*
- * If you are using an SVR3 (like ISC 4.x) which supports long file names,
- * you can * uncomment this to have manual pages installed under their
- * full names
- *
-#define ExpandManNames YES
- */
-
-/*
- * For a POSIXized build on Interactive uncomment this
- * Could be used with gcc 'till Version 2.6.3
- * Should be used with gcc 2.7.2.
- *
-#define UsePosix YES
- */
-
-/*
- * If you want XDMAUTH support (if you have Wraphelp.c), uncomment this.
- *
-#define HasXdmAuth YES
- */
-
-/*
- * To forceably build static libraries in addition to shared libraries,
- * uncomment this.
- *
-#define ForceNormalLib YES
- */
-
-/*
- * Uncomment this if your default tools (eg, gcc, ld, as, etc) are
- * not the Linux ELF versions.
- *
-#define LinuxElfDefault NO
- */
-
-/*
- * To use ELF format shared libraries for Linux, uncomment this.
- * Note: gcc-2.6.0-941008 and gas-941008 (or later) is required for this.
- * Check linux.cf if you have problems regarding the location of elf-aware
- * gcc and gas binaries.
- *
- * The default setting of this is the same as the setting of LinuxElfDefault
- *
-#define UseElfFormat YES
- */
-
-/*
- * If you have trouble with make bombing out in Xlib, try uncommenting this.
- * You will not get dependencies as a result, but better than nothing.
- *
-#define MakeHashTableBug YES
- */
-
-/*
- * If you do not want your man pages compress under SVR3 systems that
- * support it, uncomment this.
- *
-#define CompressManPages NO
- */
-
-/*
- * LinuxDoc stuff. Uncomment those of these you want. Check in
- * lnxdoc.tmpl for other things you might need to define/change here.
- *
-#define HasLinuxDoc YES
-#define HasLatex YES
-#define HasDvips YES
-#define BuildLinuxDocHtml YES
-#define BuildAllDocs YES
- */
-
-/*
- * To install Japanese versions of the documentation uncomment this.
- * Note: The Japanese documentation consists of a subset of the
- * XFree86 3.1 docs.
- *
-#define InstallJapaneseDocs YES
- */
-
-/*
- * By default, XF86Contrib is defined so build only those parts of
- * of the contrib distribution supported by XFree86. To prevent this
- * from being defined, uncomment the following.
- *
-#define DontDefineXF86Contrib
- */
-
projects / rdpsrv / blobdiff