3 CasparCG 2.0.6 Stable (as compared to 2.0.4 Stable)
\r
4 ===================================================
\r
8 o iVGA: Allow for the server to work without Processing.AirSend.x86.dll to
\r
9 prevent a possible GPL violation. It is available as a separate optional
\r
11 o iVGA: Only provide sync to channel while connected, to prevent channel
\r
13 o FFmpeg: Fixed bug during deinterlace-bob-reinterlace where output fields
\r
14 were offset by one field in relation to input fields.
\r
15 o FFmpeg: Fixed bug in ffmpeg_consumer where an access violation occurred
\r
17 o FFmpeg: Improved seeking. (Robert Nagy and Thomas Kaltz III)
\r
18 o Frontend: Only writes elements to casparcg.config which overrides a default
\r
19 value to keep the file as compact as possible.
\r
20 o System audio: Patched sfml-audio to work better with oal-consumer and
\r
21 therefore removed portaudio as the system audio implementation and went back
\r
23 o Flash: Changed so that the initial buffer fill of frames is rendered at a
\r
24 frame-duration pace instead of as fast as possible. Otherwise time based
\r
25 animations render incorrectly. During buffer recovery, a higher paced
\r
26 rendering takes place, but still not as fast as possible, which can cause
\r
27 animations to be somewhat incorrectly rendered. This is the only way though
\r
28 if we want the buffer to be able to recover after depletion.
\r
29 o Fixed race condition during server shutdown.
\r
30 o OSC: outgoing audio levels from the audio mixer for each audio channel is
\r
31 now transmitted (pFS and dBFS). (Thomas Kaltz III)
\r
32 o Stage: Fixed bug where tweened transforms were only ticked when a
\r
33 corresponding layer existed.
\r
34 o Screen consumer: Added borderless option and correct handling of name
\r
35 option. (Thomas Kaltz III)
\r
36 o AMCP: CLS now reports duration and framerate for MOVIE files were
\r
37 information is possible to extract. (Robert Nagy)
\r
38 o Version bump to keep up with CasparCG Client version.
\r
42 CasparCG 2.0.4 Stable (as compared to 2.0.4 Beta 1)
\r
43 ===================================================
\r
47 o Can now open media with file names that only consist of digits.
\r
49 o Miscellaneous stability and performance improvements.
\r
53 o Conditional compilation of chroma key support and straight alpha output
\r
54 support in shader (just like with blend-modes) because of performance impact
\r
55 even when not in use on a layer or on a channel. New <mixer /> element added
\r
56 to configuration for turning on mixer features that not everybody would want
\r
57 to pay for (performance-wise.) blend-modes also moved into this element.
\r
58 o Fixed bug where MIXER LEVELS interpreted arguments in the wrong order, so
\r
59 that gamma was interpreted as max_input and vice versa.
\r
63 o Added support for NewTek iVGA, which enables the use of CasparCG Server
\r
64 fill+key output(s) as input source(s) to a NewTek TriCaster without
\r
65 requiring video card(s) in the CasparCG Server machine, or taking up inputs
\r
66 in the TriCaster. <newtek-ivga /> element in config enables iVGA on a
\r
67 channel. (Robert Nagy sponsored by NewTek)
\r
68 o Decklink: Created custom decklink allocator to reduce the memory footprint.
\r
69 o Replaced usage of SFML for <system-audio /> with PortAudio, because of
\r
70 problems with SFML since change to static linkage. Also PortAudio seems to
\r
75 o FFmpeg: Added support for arbitrary FFmpeg options/parameters
\r
76 in ffmpeg_producer. (Cambell Prince)
\r
77 o Flash: Flash Player 11.8 now tested and fully supported.
\r
78 o Flash: No longer starts a Flash Player to service CG commands that mean
\r
79 nothing without an already running Flash Player.
\r
80 o Flash: globally serialize initialization and destruction of Flash Players,
\r
81 to avoid race conditions in Flash.
\r
82 o Flash: changed so that the Flash buffer is filled with Flash Player
\r
83 generated content at initialization instead of empty frames.
\r
87 o Performance improvements. (Robert Nagy sponsored by Boffins Technologies)
\r
88 o Never sends old values to OSC reveivers. Collects the latest value of each
\r
89 path logged since last UDP send, and sends the new UDP packet (to each
\r
90 subscribing OSC receiver) with the values collected. (Robert Nagy sponsored
\r
91 by Boffins Technologies)
\r
92 o Batches as many OSC messages as possible in an OSC bundle to reduce the
\r
93 number of UDP packets sent. Breakup into separate packages if necessary to
\r
94 avoid fragmentation. (Robert Nagy sponsored by Boffins Technologies)
\r
95 o Removed usage of Microsoft Agents library (Server ran out of memory after a
\r
96 while) in favour of direct synchronous invocations.
\r
100 CasparCG 2.0.4 Beta 1 (as compared to 2.0.3 Stable)
\r
101 ===================================================
\r
105 o Front-end GUI for simplified configuration and easy access to common tasks.
\r
106 (Thomas Kaltz III and Jeff Lafforgue)
\r
107 o Added support for video and images file thumbnail generation. By default the
\r
108 media directory is scanned every 5 seconds for new/modified/removed files
\r
109 and thumbnails are generated/regenerated/removed accordingly.
\r
110 o Support for new video modes: 1556p2398, 1556p2400, 1556p2500, 2160p2398,
\r
111 2160p2400, 2160p2500, 2160p2997 and 2160p3000.
\r
112 o Experimental ATI graphics card support by using static linking against SFML
\r
113 instead of dynamic. Should improve ATI GPU support, but needs testing.
\r
114 o Added support for playback and pass-through of up to 16 audio channels. See
\r
115 http://casparcg.com/forum/viewtopic.php?f=3&t=1453 for more information.
\r
116 o Optimizations in AMCP protocol implementations for large incoming messages,
\r
117 for example base64 encoded PNG images.
\r
118 o Logging output now includes milliseconds and has modified format:
\r
119 YYYY-MM-DD hh:mm:ss.zzz
\r
120 o Improved audio playback with 720p5994 and 720p6000 channels.
\r
121 o An attempt to improve output synchronization of consumers has been made. Use
\r
128 <embedded-audio>true</embedded-audio>
\r
132 <key-only>true</key-only>
\r
137 ...to instruct the server to keep both DeckLink consumers in sync with each
\r
138 other. Consider this experimental, so don't wrap everything in
\r
139 <synchronizing /> unless synchronization of consumer outputs is needed. For
\r
140 synchronization to be effective all synchronized cards must have genlock
\r
141 reference signal connected.
\r
142 o Transfer of source code and issue tracker to github. (Thomas Kaltz III)
\r
146 o Fixed a problem where the first frame was not always shown on LOAD.
\r
152 o Support for layer consumers for listening to frames coming out of producers.
\r
157 o Added support for a master volume mixer setting for each channel.
\r
161 o Added support for chroma keying. (Cambell Prince)
\r
162 o Fixed bug where MIXER CONTRAST set to < 1 can cause transparency issues.
\r
163 o Experimental support for straight alpha output.
\r
167 o Avoid that the FFmpeg consumer blocks the channel output when it can't keep
\r
168 up with the frame rate (drops frames instead).
\r
169 o Added support for to create a separate key and fill file when recording with
\r
170 the FFmpeg consumer. Add the SEPARATE_KEY parameter to the FFmpeg consumer
\r
171 parameter list. The key file will get the _A file name suffix to be picked
\r
172 up by the separated_producer when doing playback.
\r
173 o The Image consumer now writes to the media folder instead of the data
\r
175 o Fixed bug in DeckLink consumer where we submit too few audio samples to the
\r
176 driver when the video format has a frame rate > 50.
\r
177 o Added another experimental DeckLink consumer implementation where scheduled
\r
178 playback is not used, but a similar approach as in the bluefish consumer
\r
179 where we wait for a frame to be displayed and then display the next frame.
\r
180 It is configured via a <blocking-decklink> consumer element. The benefits of
\r
181 this consumer is lower latency and more deterministic synchronization
\r
182 between multiple instances (should not need to be wrapped in a
\r
183 <synchronizing> element when separated key/fill is used).
\r
187 o Added support for playing .swf files using the Flash producer. (Robert Nagy)
\r
188 o Image producer premultiplies PNG images with their alpha.
\r
189 o Image producer can load a PNG image encoded as base64 via:
\r
190 PLAY 1-0 [PNG_BASE64] <base64 string>
\r
191 o FFmpeg producer can now use a directshow input filters:
\r
192 PLAY 1-10 "dshow://video=Some Camera"
\r
193 (Cambell Prince, Julian Waller and Robert Nagy)
\r
194 o New layer producer which directs the output of a layer to another layer via
\r
195 a layer consumer. (Cambell Prince)
\r
199 o The master volume feature is controlled via the MASTERVOLUME MIXER
\r
200 parameter. Example: MIXER 1 MASTERVOLUME 0.5
\r
201 o THUMBNAIL LIST/RETRIEVE/GENERATE/GENERATE_ALL command was added to support
\r
202 the thumbnail feature.
\r
203 o ADD 1 FILE output.mov SEPARATE_KEY activates the separate key feature of the
\r
204 FFmpeg consumer creating an additional output_a.mov containing only the key.
\r
205 o Added KILL command for shutting down the server without console access.
\r
206 o Added RESTART command for shutting down the server in the same way as KILL
\r
207 except that the return code from CasparCG Server is 5 instead of 0, which
\r
208 can be used by parent process to take other actions. The
\r
209 'casparcg_auto_restart.bat' script restarts the server if the return code is
\r
211 o DATA RETRIEVE now returns linefeeds encoded as an actual linefeed (the
\r
212 single character 0x0a) instead of the previous two characters:
\r
214 o MIXER CHROMA command added to control the chroma keying. Example:
\r
215 MIXER 1-1 CHROMA GREEN|BLUE 0.10 0.04
\r
217 o Fixed bug where MIXER FILL overrides any previous MIXER CLIP on the same
\r
218 layer. The bugfix also has the side effect of supporting negative scale on
\r
219 MIXER FILL, causing the image to be flipped.
\r
220 o MIXER <ch> STRAIGHT_ALPHA_OUTPUT added to control whether to output straight
\r
222 o Added INFO <ch> DELAY and INFO <ch>-<layer> DELAY commands for showing some
\r
223 delay measurements.
\r
224 o PLAY 1-1 2-10 creates a layer producer on 1-1 redirecting the output of
\r
225 2-10. (Cambell Prince)
\r
230 o Support for sending OSC messages over UDP to either a predefined set of
\r
231 clients (servers in the OSC sense) or dynamically to the ip addresses of the
\r
232 currently connected AMCP clients.
\r
233 (Robert Nagy sponsored by Boffins Technologies)
\r
234 o /channel/[1-9]/stage/layer/[0-9]
\r
235 + always /paused [paused or not]
\r
236 + color producer /color [color string]
\r
237 + ffmpeg producer /profiler/time [render time] [frame duration]
\r
238 + ffmpeg producer /file/time [elapsed seconds] [total seconds]
\r
239 + ffmpeg producer /file/frame [frame] [total frames]
\r
240 + ffmpeg producer /file/fps [fps]
\r
241 + ffmpeg producer /file/path [file path]
\r
242 + ffmpeg producer /loop [looping or not]
\r
243 + during transitions /transition/frame [current frame] [total frames]
\r
244 + during transitions /transition/type [transition type]
\r
245 + flash producer /host/path [filename]
\r
246 + flash producer /host/width [width]
\r
247 + flash producer /host/height [height]
\r
248 + flash producer /host/fps [fps]
\r
249 + flash producer /buffer [buffered] [buffer size]
\r
250 + image producer /file/path [file path]
\r
254 CasparCG 2.0.3 Stable (as compared to 2.0.3 Alpha)
\r
255 ==================================================
\r
260 o Fixed dead-lock that can occur with multiple mixer tweens. (Robert Nagy)
\r
265 o DATA STORE now supports creating folders of path specified if they does not
\r
266 exist. (Jeff Lafforgue)
\r
267 o DATA REMOVE command was added. (Jeff Lafforgue)
\r
271 CasparCG 2.0.3 Alpha (as compared to 2.0 Stable)
\r
272 ================================================
\r
277 o Data files are now stored in UTF-8 with BOM. Latin1 files are still
\r
278 supported for backwards compatibility.
\r
279 o Commands written in UTF-8 to log file but only ASCII characters to console.
\r
280 o Added supported video formats:
\r
281 + 720p2398 (not supported by DeckLink)
\r
282 + 720p2400 (not supported by DeckLink)
\r
285 + 720p30 (not supported by DeckLink)
\r
286 + 720p29.976 (not supported by DeckLink)
\r
291 o CLK protocol implementation can now serve more than one connection at a time
\r
293 o Added timeline support to the CLK protocol.
\r
294 o Refactored parts of the CLK parser implementation.
\r
299 o Consumers on same channel now invoked asynchronously to allow for proper
\r
300 sync of multiple consumers.
\r
301 o System audio consumer:
\r
302 + no longer provides sync to caspar.
\r
304 + Support for multiple screen consumers on the same channel
\r
305 + No longer spin-waits for vsync
\r
306 + Now deinterlaces to two separate frames so for example 50i will no longer
\r
307 be converted to 25p but instead to 50p for smooth playback of interlaced
\r
309 o Decklink consumer now logs whether a reference signal is detected or not.
\r
314 o Image scroll producer:
\r
315 + Field-rate motion instead of frame-rate motion with interlaced video
\r
316 formats. This can be overridden by giving the PROGRESSIVE parameter.
\r
317 + SPEED parameter now defines pixels per frame/field instead of half pixels
\r
318 per frame. The scrolling direction is also reversed so SPEED 0.5 is the
\r
319 previous equivalent of SPEED -1. Movements are done with subpixel accuracy
\r
320 + Fixed incorrect starting position of image.
\r
321 + Rounding error fixes to allow for more exact scrolling.
\r
322 + Added support for motion blur via a new BLUR parameter
\r
323 + Added PREMULTIPLY parameter to support images stored with straight alpha.
\r
327 CasparCG 2.0 Stable (as compared to Beta 3)
\r
328 ===========================================
\r
333 o Misc stability and performance fixes.
\r
339 + Changed semantics to more closely follow FFmpeg (see forums).
\r
340 + Added options, -r, -acodec, -s, -pix_fmt, -f and more.
\r
342 + Added vsync support.
\r
346 CasparCG 2.0 Beta 3 (as compared to Beta 1)
\r
347 ===========================================
\r
353 + Both encoding and decoding.
\r
355 + Updated audio-pipeline for native NTSC support. Previous implementation
\r
356 did not fully support NTSC audio and could cause incorrect behaviour or
\r
362 o File Consumer added
\r
363 + See updated wiki or ask in forum for more information.
\r
364 + Should support anything FFmpeg supports. However, we will work mainly with
\r
365 DNXHD, PRORES and H264.
\r
366 - Key-only is not supported.
\r
367 o Bluefish Consumer
\r
368 + 24 bit audio support.
\r
369 - Embedded-audio does not work with Epoch cards.
\r
370 o Decklink Consumer
\r
371 + Low latency enabled by default.
\r
372 + Added graphs for driver buffers.
\r
374 + Changed screen consumer square PAL to the more common wide-square PAL.
\r
375 + Can now be closed.
\r
376 + Fixed interpolation artifacts when running non-square video-modes.
\r
377 + Automatically deinterlace interlaced input.
\r
382 o Decklink Producer
\r
383 + Improved color quality be avoiding uneccessary conversion to BGRA.
\r
385 + Fixed missing alpha for (RGB)A formats when deinterlacing.
\r
386 + Updated buffering to work better with files with long audio/video
\r
388 + Seekable while running and after reaching EOF. CALL 1-1 SEEK 200.
\r
389 + Enable/disable/query looping while running. CALL 1-1 LOOP 1.
\r
390 + Fixed bug with duration calculation.
\r
391 + Fixed bug with fps calculation.
\r
392 + Improved auto-transcode accuracy.
\r
393 + Improved seeking accuracy.
\r
394 + Fixed bug with looping and LENGTH.
\r
395 + Updated to newer FFmpeg version.
\r
396 + Fixed incorrect scaling of NTSC DV files.
\r
397 + Optimized color conversion when using YADIF filters.
\r
399 + Release Flash Player when empty.
\r
400 + Use native resolution TemplateHost.
\r
401 + TemplateHosts are now choosen automatically if not configured. The
\r
402 TemplateHost with the corresponding video-mode name is now chosen.
\r
403 + Use square pixel dimensions.
\r
408 o When possible, commands will no longer wait for rendering pipeline. This
\r
409 reduces command execution latencies, especially when sending a lot of
\r
410 commands in a short timespan.
\r
411 o Fixed CINF command.
\r
412 o ADD/REMOVE no longer require subindex,
\r
413 e.g. "ADD 1 SCREEN" / "REMOVE 1 SCREEN" instead of "ADD 1-1 SCREEN" / ...
\r
414 o PARAM is renamed to CALL.
\r
415 o STATUS command is replaced by INFO.
\r
416 o INFO command has been extended:
\r
417 + INFO (lists channels).
\r
418 + INFO 1 (channel info).
\r
419 + INFO 1-1 (layer info).
\r
420 + INFO 1-1 F (foreground producer info).
\r
421 + INFO 1-1 B (background producer info).
\r
422 + INFO TEMPLATE mytemplate (template meta-data info, e.g. field names).
\r
423 o CG INFO command has been extended.
\r
424 + CG INFO 1 (template-host information, e.g. what layers are occupied).
\r
429 o Fixed alpha with blend modes.
\r
430 o Automatically deinterlace for MIXER FILL commands.
\r
435 o SET MODE now reverts back to old video-mode on failure.
\r
440 o Improved graphs and added more status information.
\r
441 o Print configuration into log at startup.
\r
442 o Use the same log file for the entire day, instead of one per startup as
\r
444 o Diagnostics window is now closable.
\r
448 CasparCG 2.0 Beta 1 (as compared to Alpha)
\r
449 ==========================================
\r
451 o Blending Modes (needs to be explicitly enabled)
\r
456 o Added additive keyer in addition to linear keyer.
\r
457 o Image adjustements
\r
466 o Support for FFmpeg-filters such as (ee http://ffmpeg.org/libavfilter.html)
\r
467 + yadif deinterlacer (optimized in CasparCG for full multi-core support)
\r
472 o 32-bit SSE optimized audio pipeline.
\r
473 o Decklink-Consumer uses external-key by default.
\r
474 o Decklink-Consumer has 24 bit embedded-audio support.
\r
475 o Decklink-Producer has 24 bit embedded-audio support.
\r
476 o LOADBG with AUTO feature which automatically playes queued clip when
\r
477 foreground clip has ended.
\r
478 o STATUS command for layers.
\r
479 o LOG LEVEL command for log filtering.
\r
480 o MIX transitation work with transparent clips.
\r
481 o Freeze on last frame.
\r
482 o Producer buffering is now configurable.
\r
483 o Consumer buffering is now configurable.
\r
484 o Now possible to configure template-hosts for different video-modes.
\r
485 o Added auto transcoder for FFmpeg producer which automatically transcodes
\r
486 input video into compatible video format for the channel.
\r
487 + interlacing (50p -> 50i)
\r
488 + deinterlacing (50i -> 25p)
\r
489 + bob-deinterlacing (50i -> 50p)
\r
490 + bob-deinterlacing and reinterlacing (w1xh150i -> w2xh250i)
\r
491 + doubling (25p -> 50p)
\r
492 + halfing (50p -> 25p)
\r
493 + field-order swap (upper <-> lower)
\r
494 o Screen consumer now automatically deinterlaces when receiveing interlaced
\r
496 o Optimized renderer.
\r
497 o Renderer can now be run asynchronously with producer by using a
\r
498 producer-buffer size greater than 0.
\r
499 o Improved error and crash recovery.
\r
500 o Improved logging.
\r
501 o Added Image-Scroll-Producer.
\r
502 o Key-only has now near zero performance overhead.
\r
503 o Reduced memory requirements.
\r
504 o Removed "warm up lag" which occured when playing the first media clip after
\r
505 the server has started.
\r
506 o Added read-back fence for OpenGL device for improved multi-channel
\r
508 o Memory support increased from standard 2 GB to 4 GB on 64 bit Win 7 OS.
\r
509 o Added support for 2* Decklink cards in FullHD.
\r
510 o Misc bugs fixes and performance improvements.
\r
511 o Color producer now support some color codes in addition to color codes, e.g.
\r
512 EMPTY, BLACK, RED etc...
\r
513 o Alpha value in color codes is now optional.
\r
514 o More than 2 Decklink cards might be possible but have not yet been tested.
\r
518 CasparCG 2.0 Alpha (as compared to 1.8)
\r
519 =======================================
\r
524 o Mayor refactoring for improved readability and mainainability.
\r
525 o Some work towards platorm-independence. Currently the greatest challenge for
\r
526 full platform-independence is flash-producer.
\r
527 o Misc improved scalability.
\r
528 o XML-configuration.
\r
530 + Support for multiple DeckLink cards.
\r
535 o Multiple producers per video_channel.
\r
536 o Multiple consumers per video_channel.
\r
537 o Swap producers between layers and channels during run-time.
\r
538 o Support for upper-field and lower-field interlacing.
\r
539 o Add and remove consumers during run-time.
\r
540 o Preliminary support for NTSC.
\r
545 o Query flash and template-host version.
\r
546 o Recursive media-folder listing.
\r
552 o Animated tween transforms.
\r
554 + Fully GPU accelerated (all features listed below are done on the gpu),
\r
555 + Layer composition.
\r
556 + Colorspaces (rgba, bgra, argb, yuv, yuva, yuv-hd, yuva-hd).
\r
558 + Per-layer image-transforms:
\r
565 + Per-layer and per-sample audio-transforms:
\r
567 + Fully internal audio-mixing. Single output-video_channel.
\r
572 o Decklink-Consumer
\r
576 o Bluefish-Consumer
\r
577 + Drivers are loaded on-demand (server now runs on computers without
\r
578 installed bluefish-drivers).
\r
580 + Allocated frames are no longer leaked.
\r
585 o Decklink-Producer
\r
591 + Asynchronous file IO.
\r
592 + Parallel decoding of audio and video.
\r
593 + Colorspace transform are moved to gpu.
\r
594 o Transition-Producer
\r
595 + Fully interlaced transition (previsously only progressive, even when
\r
596 running in interlaced mode).
\r
597 + Per-sample mixing between source and destination clips.
\r
598 + Tween transitions.
\r
600 + DirectDraw access (sligthly improved performance).
\r
601 + Improved time-sync. Smoother animations and proper interlacing.
\r
603 + Support for various imageformats through FreeImage library.
\r
608 o Graphs for monitoring performance and events.
\r
609 o Misc logging improvements.
\r
610 o Seperate log-file for every run of the server.
\r
611 o Error logging provides full exception details, instead of only printing that
\r
612 an error has occured.
\r
613 o Console with real-time logging output.
\r
614 o Console with AMCP input.
\r
619 o Registry-configuration (replaced by XML-Configuration).
\r
620 o TGA-Producer (replaced by Image-Producer).
\r
621 o TGA-Scroll-Producer
\r
projects / casparcg / blob