Update the video menu for time code.

[nageru-docs] / gettingstarted.rst

diff --git a/gettingstarted.rst b/gettingstarted.rst
index 82b44577a263d1ab130e33ad5459e05f84b6927b..e2e37005d7bbbc607110019e807cbd0bec03c085 100644 (file)
--- a/gettingstarted.rst
+++ b/gettingstarted.rst
@@ -3,7 +3,7 @@ Getting started
 
 Welcome to Nageru! For simple use, you can jump right in and make yourself
 comfortable (at least if you have the :doc:`hardware requirements <hardware>`
-in place and have `compiled it <compile>`), but if you prefer a gentler introduction,
+in place and have `compiled it <compile>`_), but if you prefer a gentler introduction,
 this is the place.
 
 
@@ -123,8 +123,13 @@ The video menu contains the following elements:
     You can achieve the same effect as this option by sending
     SIGHUP to the Nageru process.
 
+  * **Open frame analyzer:** See :doc:`analyzer` for more information.
+
   * **Change x264 bitrate:** See :doc:`streaming` for more information.
 
+  * **HDMI/SDI output device, HDMI/SDI output resolution, Display time code:**
+    See :doc:`hdmisdi` for more information.
+
   * **Exit:** Exits Nageru, obviously.
 
 The audio menu is explained in the section on :doc:`audio <audio>`.
@@ -169,6 +174,16 @@ The options presented are as follows:
    cards that can handle it in hardware), but a simple option (“Scan”)
    is available to try all modes in turn until a signal is received.
 
+ * **Input interpretation:** Choose how the Y'CbCr values in the input signal
+   are to be interpreted. *Auto* will choose whatever is correct (as per the
+   appropriate standards) for the current video mode, but occasionally,
+   devices will get this wrong, and you will need to change this setting
+   to get correct colors. You can use the *--input-ycbcr-interpretation=*
+   command-line option to achieve the same effect.
+
+   See :doc:`analyzer` for figuring out if you need to change this.
+   If unsure, leave it unchanged.
+
  * **Use as audio source:** See the :doc:`audio <audio>` page for more
    information. For simple audio only; unavailable in multichannel mode.