git.sesse.net Git - nageru/blob - nageru/flags.cpp

   1 #include "flags.h"
   2
   3 #include <getopt.h>
   4 #include <stdio.h>
   5 #include <stdlib.h>
   6 #include <string.h>
   7
   8 #include <utility>
   9
  10 using namespace std;
  11
  12 Flags global_flags;
  13
  14 // Long options that have no corresponding short option.
  15 enum LongOption {
  16         OPTION_HELP = 1000,
  17         OPTION_FULLSCREEN,
  18         OPTION_MAX_NUM_CARDS,
  19         OPTION_MULTICHANNEL,
  20         OPTION_MIDI_MAPPING,
  21         OPTION_DEFAULT_HDMI_INPUT,
  22         OPTION_FAKE_CARDS_AUDIO,
  23         OPTION_V4L_OUTPUT,
  24         OPTION_HTTP_UNCOMPRESSED_VIDEO,
  25         OPTION_HTTP_X264_VIDEO,
  26         OPTION_HTTP_AV1_VIDEO,
  27         OPTION_RECORD_X264_VIDEO,
  28         OPTION_SEPARATE_X264_DISK_ENCODE,
  29         OPTION_X264_PRESET,
  30         OPTION_X264_TUNE,
  31         OPTION_X264_SPEEDCONTROL,
  32         OPTION_X264_SPEEDCONTROL_VERBOSE,
  33         OPTION_X264_BITRATE,
  34         OPTION_X264_CRF,
  35         OPTION_X264_VBV_BUFSIZE,
  36         OPTION_X264_VBV_MAX_BITRATE,
  37         OPTION_X264_PARAM,
  38         OPTION_X264_SEPARATE_DISK_PRESET,
  39         OPTION_X264_SEPARATE_DISK_TUNE,
  40         OPTION_X264_SEPARATE_DISK_BITRATE,
  41         OPTION_X264_SEPARATE_DISK_CRF,
  42         OPTION_X264_SEPARATE_DISK_PARAM,
  43         OPTION_AV1_PRESET,
  44         OPTION_AV1_BITRATE,
  45         OPTION_AV1_FPS,
  46         OPTION_AV1_PARAM,
  47         OPTION_HTTP_MUX,
  48         OPTION_HTTP_COARSE_TIMEBASE,
  49         OPTION_HTTP_AUDIO_CODEC,
  50         OPTION_HTTP_AUDIO_BITRATE,
  51         OPTION_HTTP_PORT,
  52         OPTION_SRT_PORT,
  53         OPTION_NO_SRT,
  54         OPTION_NO_TRANSCODE_VIDEO,
  55         OPTION_NO_TRANSCODE_AUDIO,
  56         OPTION_DISABLE_AUDIO,
  57         OPTION_FLAT_AUDIO,
  58         OPTION_GAIN_STAGING,
  59         OPTION_DISABLE_LOCUT,
  60         OPTION_ENABLE_LOCUT,
  61         OPTION_DISABLE_GAIN_STAGING_AUTO,
  62         OPTION_ENABLE_GAIN_STAGING_AUTO,
  63         OPTION_DISABLE_COMPRESSOR,
  64         OPTION_ENABLE_COMPRESSOR,
  65         OPTION_DISABLE_LIMITER,
  66         OPTION_ENABLE_LIMITER,
  67         OPTION_DISABLE_MAKEUP_GAIN_AUTO,
  68         OPTION_ENABLE_MAKEUP_GAIN_AUTO,
  69         OPTION_DISABLE_ALSA_OUTPUT,
  70         OPTION_NO_FLUSH_PBOS,
  71         OPTION_PRINT_VIDEO_LATENCY,
  72         OPTION_MAX_INPUT_QUEUE_FRAMES,
  73         OPTION_AUDIO_QUEUE_LENGTH_MS,
  74         OPTION_OUTPUT_YCBCR_COEFFICIENTS,
  75         OPTION_OUTPUT_BUFFER_FRAMES,
  76         OPTION_OUTPUT_SLOP_FRAMES,
  77         OPTION_OUTPUT_CARD_UNSYNCHRONIZED,
  78         OPTION_TIMECODE_STREAM,
  79         OPTION_TIMECODE_STDOUT,
  80         OPTION_QUICK_CUT_KEYS,
  81         OPTION_10_BIT,
  82         OPTION_10_BIT_INPUT,
  83         OPTION_10_BIT_OUTPUT,
  84         OPTION_INPUT_YCBCR_INTERPRETATION,
  85         OPTION_MJPEG_EXPORT_CARDS,
  86 };
  87
  88 map<unsigned, unsigned> parse_mjpeg_export_cards(char *optarg)
  89 {
  90         map<unsigned, unsigned> ret;
  91         if (optarg[0] == '\0') {
  92                 return ret;
  93         }
  94
  95         unsigned stream_idx = 0;
  96         char *start = optarg;
  97         for ( ;; ) {
  98                 char *end = strchr(start, ',');
  99                 if (end != nullptr) {
 100                         *end = '\0';
 101                 }
 102
 103                 unsigned range_begin, range_end;
 104                 if (sscanf(start, "%u-%u", &range_begin, &range_end) != 2) {
 105                         range_begin = range_end = atoi(start);
 106                 }
 107                 if (range_end < range_begin) {
 108                         fprintf(stderr, "ERROR: Invalid range %u-%u in --mjpeg-export-cards=\n", range_begin, range_end);
 109                         exit(1);
 110                 }
 111                 if (range_end >= unsigned(global_flags.max_num_cards)) {
 112                         // There are situations where we could possibly want to
 113                         // include FFmpeg inputs (CEF inputs are unlikely),
 114                         // but they're not necessarily in 4:2:2 Y'CbCr, so it would
 115                         // require more functionality the the JPEG encoder.
 116                         fprintf(stderr, "ERROR: Asked for (zero-indexed) card %u in --mjpeg-export-cards=, but there are only %u cards\n",
 117                                 range_end, global_flags.max_num_cards);
 118                         exit(1);
 119                 }
 120                 for (unsigned card_idx = range_begin; card_idx <= range_end; ++card_idx) {
 121                         if (ret.count(card_idx)) {
 122                                 fprintf(stderr, "ERROR: Card %u was given twice in --mjpeg-export-cards=\n", card_idx);
 123                                 exit(1);
 124                         }
 125                         ret[card_idx] = stream_idx++;
 126                 }
 127                 if (end == nullptr) {
 128                         break;
 129                 } else {
 130                         start = end + 1;
 131                 }
 132         }
 133         return ret;
 134 }
 135
 136 void usage(Program program)
 137 {
 138         if (program == PROGRAM_KAERU) {
 139                 fprintf(stderr, "Usage: kaeru [OPTION]... SOURCE_URL\n");
 140         } else {
 141                 fprintf(stderr, "Usage: nageru [OPTION]...\n");
 142         }
 143         fprintf(stderr, "\n");
 144         fprintf(stderr, "      --help                      print usage information\n");
 145         if (program == PROGRAM_NAGERU) {
 146                 fprintf(stderr, "      --fullscreen                run in full screen, with no decorations\n");
 147         }
 148         fprintf(stderr, "  -w, --width                     output width in pixels (default 1280)\n");
 149         fprintf(stderr, "  -h, --height                    output height in pixels (default 720)\n");
 150         if (program == PROGRAM_NAGERU) {
 151                 fprintf(stderr, "  -c, --num-cards                 set minimum number of input cards (default 2)\n");
 152                 fprintf(stderr, "      --max-num-cards             set maximum number of input cards (default %d)\n", MAX_VIDEO_CARDS);
 153                 fprintf(stderr, "  -o, --output-card=CARD          also output signal to the given card (default none)\n");
 154                 fprintf(stderr, "  -t, --theme=FILE                choose theme (default theme.lua)\n");
 155                 fprintf(stderr, "  -I, --theme-dir=DIR             search for theme in this directory (can be given multiple times)\n");
 156                 fprintf(stderr, "  -r, --recording-dir=DIR         where to store disk recording\n");
 157                 fprintf(stderr, "  -v, --va-display=SPEC           VA-API device for H.264 encoding\n");
 158                 fprintf(stderr, "                                    ($DISPLAY spec or /dev/dri/render* path)\n");
 159                 fprintf(stderr, "  -m, --map-signal=SIGNAL,CARD    set a default card mapping (can be given multiple times)\n");
 160                 fprintf(stderr, "  -M, --input-mapping=FILE        start with the given audio input mapping (implies --multichannel)\n");
 161                 fprintf(stderr, "      --multichannel              start in multichannel audio mapping mode\n");
 162                 fprintf(stderr, "      --midi-mapping=FILE         start with the given MIDI controller mapping (implies --multichannel)\n");
 163                 fprintf(stderr, "      --default-hdmi-input        default to HDMI over SDI inputs for cards that have both\n");
 164                 fprintf(stderr, "      --fake-cards-audio          make fake (disconnected) cards output a simple tone\n");
 165                 fprintf(stderr, "      --v4l-output DEVICE         send video (no audio) to V4L2 output/loopback\n");
 166                 fprintf(stderr, "      --http-uncompressed-video   send uncompressed NV12 video to HTTP clients\n");
 167                 fprintf(stderr, "      --http-x264-video           send x264-compressed video to HTTP clients\n");
 168                 fprintf(stderr, "      --record-x264-video         store x264-compressed video to disk (implies --http-x264-video,\n");
 169                 fprintf(stderr, "                                    removes the need for working VA-API encoding)\n");
 170                 fprintf(stderr, "      --separate-x264-disk-encode run a different x264 encoder for disk recording\n");
 171                 fprintf(stderr, "                                    (implies --record-x264-video)\n");
 172         }
 173         fprintf(stderr, "      --x264-preset               x264 quality preset (default " X264_DEFAULT_PRESET ")\n");
 174         fprintf(stderr, "      --x264-tune                 x264 tuning (default " X264_DEFAULT_TUNE ", can be blank)\n");
 175         fprintf(stderr, "      --x264-speedcontrol         try to match x264 preset to available CPU speed\n");
 176         fprintf(stderr, "      --x264-speedcontrol-verbose  output speedcontrol debugging statistics\n");
 177         fprintf(stderr, "      --x264-bitrate              x264 bitrate (in kilobit/sec, default %d)\n",
 178                 DEFAULT_X264_OUTPUT_BIT_RATE);
 179         fprintf(stderr, "      --x264-crf=VALUE            quality-based VBR (-12 to 51), incompatible with --x264-bitrate and VBV\n");
 180         fprintf(stderr, "      --x264-vbv-bufsize          x264 VBV size (in kilobits, 0 = one-frame VBV,\n");
 181         fprintf(stderr, "                                  default: same as --x264-bitrate, that is, one-second VBV)\n");
 182         fprintf(stderr, "      --x264-vbv-max-bitrate      x264 local max bitrate (in kilobit/sec per --vbv-bufsize,\n");
 183         fprintf(stderr, "                                  0 = no limit, default: same as --x264-bitrate, i.e., CBR)\n");
 184         fprintf(stderr, "      --x264-param=NAME[,VALUE]   set any x264 parameter, for fine tuning\n");
 185         if (program == PROGRAM_NAGERU) {
 186                 fprintf(stderr, "      --x264-separate-disk-preset x264 quality preset (default " X264_DEFAULT_PRESET ")\n");
 187                 fprintf(stderr, "      --x264-separate-disk-tune   x264 tuning (default " X264_DEFAULT_TUNE ", can be blank)\n");
 188                 fprintf(stderr, "      --x264-separate-disk-bitrate  x264 bitrate (in kilobit/sec, default %d)\n",
 189                         DEFAULT_X264_OUTPUT_BIT_RATE);
 190                 fprintf(stderr, "      --x264-separate-disk-crf=VALUE  quality-based VBR (-12 to 51), \n");
 191                 fprintf(stderr, "                                  incompatible with --x264-separate-disk-bitrate\n");
 192                 fprintf(stderr, "      --x264-separate-disk-param=NAME[,VALUE] set any x264 parameter, for fine tuning\n");
 193         }
 194 #ifdef HAVE_AV1
 195         fprintf(stderr, "      --http-av1-video            send AV1-compressed video to HTTP clients\n");
 196         fprintf(stderr, "      --av1-preset                SVT-AV1 quality preset (default %d, from -2 to 13)\n",
 197                 DEFAULT_AV1_PRESET);
 198         fprintf(stderr, "      --av1-bitrate               AV1 bitrate (in kilobit/sec, default %d)\n",
 199                 DEFAULT_AV1_OUTPUT_BIT_RATE);
 200         fprintf(stderr, "      --av1-fps=NUM[/DEN]         AV1 encoded frame rate (default %d/%d)\n",
 201                 DEFAULT_AV1_FPS_NUM, DEFAULT_AV1_FPS_DEN);
 202         fprintf(stderr, "      --av1-param=NAME[,VALUE]    set any SVT-AV1 parameter, for fine tuning\n");
 203 #endif
 204         fprintf(stderr, "      --http-mux=NAME             mux to use for HTTP streams (default " DEFAULT_STREAM_MUX_NAME ")\n");
 205         fprintf(stderr, "      --http-audio-codec=NAME     audio codec to use for HTTP streams\n");
 206         fprintf(stderr, "                                  (default is to use the same as for the recording)\n");
 207         fprintf(stderr, "      --http-audio-bitrate=KBITS  audio codec bit rate to use for HTTP streams\n");
 208         fprintf(stderr, "                                  (default is %d, ignored unless --http-audio-codec is set)\n",
 209                 DEFAULT_AUDIO_OUTPUT_BIT_RATE / 1000);
 210         fprintf(stderr, "      --http-port=PORT            which port to use for the built-in HTTP server\n");
 211         fprintf(stderr, "                                  (default is %d)\n", DEFAULT_HTTPD_PORT);
 212         fprintf(stderr, "      --srt-port=PORT             which port to use for receiving SRT streams\n");
 213         fprintf(stderr, "                                  (default is %d)\n", DEFAULT_SRT_PORT);
 214         fprintf(stderr, "      --no-srt                    disable receiving SRT streams\n");
 215         if (program == PROGRAM_KAERU) {
 216                 fprintf(stderr, "      --no-transcode-video        copy encoded video raw from the source stream\n");
 217                 fprintf(stderr, "                                    (experimental, must be H.264)\n");
 218                 fprintf(stderr, "      --no-transcode-audio        copy encoded audio raw from the source stream\n");
 219                 fprintf(stderr, "                                    (requires --http-audio-codec= to be set)\n");
 220                 fprintf(stderr, "      --disable-audio             do not include any audio in the stream\n");
 221         }
 222         if (program == PROGRAM_NAGERU) {
 223                 fprintf(stderr, "      --flat-audio                start with most audio processing turned off\n");
 224                 fprintf(stderr, "                                    (can be overridden by e.g. --enable-limiter)\n");
 225                 fprintf(stderr, "      --gain-staging=DB           set initial gain staging to the given value\n");
 226                 fprintf(stderr, "                                    (--disable-gain-staging-auto)\n");
 227                 fprintf(stderr, "      --disable-locut             turn off locut filter (also --enable)\n");
 228                 fprintf(stderr, "      --disable-gain-staging-auto  turn off automatic gain staging (also --enable)\n");
 229                 fprintf(stderr, "      --disable-compressor        turn off regular compressor (also --enable)\n");
 230                 fprintf(stderr, "      --disable-limiter           turn off limiter (also --enable)\n");
 231                 fprintf(stderr, "      --disable-makeup-gain-auto  turn off auto-adjustment of final makeup gain (also --enable)\n");
 232                 fprintf(stderr, "      --disable-alsa-output       disable audio monitoring via ALSA\n");
 233                 fprintf(stderr, "      --no-flush-pbos             do not explicitly signal texture data uploads\n");
 234                 fprintf(stderr, "                                    (will give display corruption, but makes it\n");
 235                 fprintf(stderr, "                                    possible to run with apitrace in real time)\n");
 236                 fprintf(stderr, "      --print-video-latency       print out measurements of video latency on stdout\n");
 237                 fprintf(stderr, "      --max-input-queue-frames=FRAMES  never keep more than FRAMES frames for each card\n");
 238                 fprintf(stderr, "                                    (default 6, minimum 1)\n");
 239                 fprintf(stderr, "      --audio-queue-length-ms=MS  length of audio resampling queue (default 100.0)\n");
 240                 fprintf(stderr, "      --output-ycbcr-coefficients={rec601,rec709,auto}\n");
 241                 fprintf(stderr, "                                  Y'CbCr coefficient standard of output (default auto)\n");
 242                 fprintf(stderr, "                                    auto is rec601, unless --output-card is used\n");
 243                 fprintf(stderr, "                                    and a Rec. 709 mode (typically HD modes) is in use\n");
 244                 fprintf(stderr, "      --output-buffer-frames=NUM  number of frames in output buffer for --output-card,\n");
 245                 fprintf(stderr, "                                    can be fractional (default 6.0); note also\n");
 246                 fprintf(stderr, "                                    the audio queue can't be much longer than this\n");
 247                 fprintf(stderr, "      --output-slop-frames=NUM    if more less than this number of frames behind for\n");
 248                 fprintf(stderr, "                                    --output-card, try to submit anyway instead of\n");
 249                 fprintf(stderr, "                                    dropping the frame (default 0.5)\n");
 250                 fprintf(stderr, "      --output-card-unsynchronized  if --output-card is in use, do _not_ use it as\n");
 251                 fprintf(stderr, "                                  master clock (may give jittery output and audio breakups)\n");
 252                 fprintf(stderr, "      --timecode-stream           show timestamp and timecode in stream\n");
 253                 fprintf(stderr, "      --timecode-stdout           show timestamp and timecode on standard output\n");
 254                 fprintf(stderr, "      --quick-cut-keys            enable direct cutting by Q, W, E, ... keys\n");
 255                 fprintf(stderr, "      --10-bit                    use 10-bit color depth\n");
 256                 fprintf(stderr, "      --input-ycbcr-interpretation=CARD,{rec601,rec709,auto}[,{limited,full}]\n");
 257                 fprintf(stderr, "                                  Y'CbCr coefficient standard of card CARD (default auto)\n");
 258                 fprintf(stderr, "                                    auto is rec601 for SD, rec709 for HD, always limited\n");
 259                 fprintf(stderr, "                                    limited means standard 0-240/0-235 input range (for 8-bit)\n");
 260                 fprintf(stderr, "      --mjpeg-export-cards=RANGE[,RANGE...]\n");
 261                 fprintf(stderr, "                                  export the given cards in MJPEG format to /multicam.mp4,\n");
 262                 fprintf(stderr, "                                    in the given order (ranges can be either single card indexes\n");
 263                 fprintf(stderr, "                                    or pairs like 1-3 for camera 1,2,3; default is all cards)\n");
 264         }
 265 }
 266
 267 void parse_flags(Program program, int argc, char * const argv[])
 268 {
 269         static const option long_options[] = {
 270                 { "help", no_argument, 0, OPTION_HELP },
 271                 { "fullscreen", no_argument, 0, OPTION_FULLSCREEN },
 272                 { "width", required_argument, 0, 'w' },
 273                 { "height", required_argument, 0, 'h' },
 274                 { "num-cards", required_argument, 0, 'c' },
 275                 { "max-num-cards", required_argument, 0, OPTION_MAX_NUM_CARDS },
 276                 { "output-card", required_argument, 0, 'o' },
 277                 { "theme", required_argument, 0, 't' },
 278                 { "theme-dir", required_argument, 0, 'I' },
 279                 { "recording-dir", required_argument, 0, 'r' },
 280                 { "map-signal", required_argument, 0, 'm' },
 281                 { "input-mapping", required_argument, 0, 'M' },
 282                 { "va-display", required_argument, 0, 'v' },
 283                 { "multichannel", no_argument, 0, OPTION_MULTICHANNEL },
 284                 { "midi-mapping", required_argument, 0, OPTION_MIDI_MAPPING },
 285                 { "default-hdmi-input", no_argument, 0, OPTION_DEFAULT_HDMI_INPUT },
 286                 { "fake-cards-audio", no_argument, 0, OPTION_FAKE_CARDS_AUDIO },
 287                 { "v4l-output", required_argument, 0, OPTION_V4L_OUTPUT },
 288                 { "http-uncompressed-video", no_argument, 0, OPTION_HTTP_UNCOMPRESSED_VIDEO },
 289                 { "http-x264-video", no_argument, 0, OPTION_HTTP_X264_VIDEO },
 290                 { "record-x264-video", no_argument, 0, OPTION_RECORD_X264_VIDEO },
 291                 { "separate-x264-disk-encode", no_argument, 0, OPTION_SEPARATE_X264_DISK_ENCODE },
 292                 { "x264-preset", required_argument, 0, OPTION_X264_PRESET },
 293                 { "x264-tune", required_argument, 0, OPTION_X264_TUNE },
 294                 { "x264-speedcontrol", no_argument, 0, OPTION_X264_SPEEDCONTROL },
 295                 { "x264-speedcontrol-verbose", no_argument, 0, OPTION_X264_SPEEDCONTROL_VERBOSE },
 296                 { "x264-bitrate", required_argument, 0, OPTION_X264_BITRATE },
 297                 { "x264-crf", required_argument, 0, OPTION_X264_CRF },
 298                 { "x264-vbv-bufsize", required_argument, 0, OPTION_X264_VBV_BUFSIZE },
 299                 { "x264-vbv-max-bitrate", required_argument, 0, OPTION_X264_VBV_MAX_BITRATE },
 300                 { "x264-param", required_argument, 0, OPTION_X264_PARAM },
 301                 { "x264-separate-disk-preset", required_argument, 0, OPTION_X264_SEPARATE_DISK_PRESET },
 302                 { "x264-separate-disk-tune", required_argument, 0, OPTION_X264_SEPARATE_DISK_TUNE },
 303                 { "x264-separate-disk-bitrate", required_argument, 0, OPTION_X264_SEPARATE_DISK_BITRATE },
 304                 { "x264-separate-disk-crf", required_argument, 0, OPTION_X264_SEPARATE_DISK_CRF },
 305                 { "x264-separate-disk-param", required_argument, 0, OPTION_X264_SEPARATE_DISK_PARAM },
 306 #ifdef HAVE_AV1
 307                 { "http-av1-video", no_argument, 0, OPTION_HTTP_AV1_VIDEO },
 308                 { "av1-preset", required_argument, 0, OPTION_AV1_PRESET },
 309                 { "av1-bitrate", required_argument, 0, OPTION_AV1_BITRATE },
 310                 { "av1-fps", required_argument, 0, OPTION_AV1_FPS },
 311                 { "av1-param", required_argument, 0, OPTION_AV1_PARAM },
 312 #endif
 313                 { "http-mux", required_argument, 0, OPTION_HTTP_MUX },
 314                 { "http-audio-codec", required_argument, 0, OPTION_HTTP_AUDIO_CODEC },
 315                 { "http-audio-bitrate", required_argument, 0, OPTION_HTTP_AUDIO_BITRATE },
 316                 { "http-port", required_argument, 0, OPTION_HTTP_PORT },
 317                 { "srt-port", required_argument, 0, OPTION_SRT_PORT },
 318                 { "no-srt", no_argument, 0, OPTION_NO_SRT },
 319                 { "no-transcode-video", no_argument, 0, OPTION_NO_TRANSCODE_VIDEO },
 320                 { "no-transcode-audio", no_argument, 0, OPTION_NO_TRANSCODE_AUDIO },
 321                 { "disable-audio", no_argument, 0, OPTION_DISABLE_AUDIO },
 322                 { "flat-audio", no_argument, 0, OPTION_FLAT_AUDIO },
 323                 { "gain-staging", required_argument, 0, OPTION_GAIN_STAGING },
 324                 { "disable-locut", no_argument, 0, OPTION_DISABLE_LOCUT },
 325                 { "enable-locut", no_argument, 0, OPTION_ENABLE_LOCUT },
 326                 { "disable-gain-staging-auto", no_argument, 0, OPTION_DISABLE_GAIN_STAGING_AUTO },
 327                 { "enable-gain-staging-auto", no_argument, 0, OPTION_ENABLE_GAIN_STAGING_AUTO },
 328                 { "disable-compressor", no_argument, 0, OPTION_DISABLE_COMPRESSOR },
 329                 { "enable-compressor", no_argument, 0, OPTION_ENABLE_COMPRESSOR },
 330                 { "disable-limiter", no_argument, 0, OPTION_DISABLE_LIMITER },
 331                 { "enable-limiter", no_argument, 0, OPTION_ENABLE_LIMITER },
 332                 { "disable-makeup-gain-auto", no_argument, 0, OPTION_DISABLE_MAKEUP_GAIN_AUTO },
 333                 { "enable-makeup-gain-auto", no_argument, 0, OPTION_ENABLE_MAKEUP_GAIN_AUTO },
 334                 { "disable-alsa-output", no_argument, 0, OPTION_DISABLE_ALSA_OUTPUT },
 335                 { "no-flush-pbos", no_argument, 0, OPTION_NO_FLUSH_PBOS },
 336                 { "print-video-latency", no_argument, 0, OPTION_PRINT_VIDEO_LATENCY },
 337                 { "max-input-queue-frames", required_argument, 0, OPTION_MAX_INPUT_QUEUE_FRAMES },
 338                 { "audio-queue-length-ms", required_argument, 0, OPTION_AUDIO_QUEUE_LENGTH_MS },
 339                 { "output-ycbcr-coefficients", required_argument, 0, OPTION_OUTPUT_YCBCR_COEFFICIENTS },
 340                 { "output-buffer-frames", required_argument, 0, OPTION_OUTPUT_BUFFER_FRAMES },
 341                 { "output-slop-frames", required_argument, 0, OPTION_OUTPUT_SLOP_FRAMES },
 342                 { "output-card-unsynchronized", no_argument, 0, OPTION_OUTPUT_CARD_UNSYNCHRONIZED },
 343                 { "timecode-stream", no_argument, 0, OPTION_TIMECODE_STREAM },
 344                 { "timecode-stdout", no_argument, 0, OPTION_TIMECODE_STDOUT },
 345                 { "quick-cut-keys", no_argument, 0, OPTION_QUICK_CUT_KEYS },
 346                 { "10-bit", no_argument, 0, OPTION_10_BIT },
 347                 { "input-ycbcr-interpretation", required_argument, 0, OPTION_INPUT_YCBCR_INTERPRETATION },
 348                 { "mjpeg-export-cards", required_argument, 0, OPTION_MJPEG_EXPORT_CARDS },
 349
 350                 // Deprecated variants.
 351                 { "10-bit-input", no_argument, 0, OPTION_10_BIT_INPUT },
 352                 { "10-bit-output", no_argument, 0, OPTION_10_BIT_OUTPUT },
 353
 354                 { 0, 0, 0, 0 }
 355         };
 356         vector<string> theme_dirs;
 357         string output_ycbcr_coefficients = "auto";
 358         bool card_to_mjpeg_stream_export_set = false;
 359         for ( ;; ) {
 360                 int option_index = 0;
 361                 int c = getopt_long(argc, argv, "c:o:t:I:r:v:m:M:w:h:", long_options, &option_index);
 362
 363                 if (c == -1) {
 364                         break;
 365                 }
 366                 switch (c) {
 367                 case 'w':
 368                         global_flags.width = atoi(optarg);
 369                         break;
 370                 case 'h':
 371                         global_flags.height = atoi(optarg);
 372                         break;
 373                 case 'c':
 374                         global_flags.min_num_cards = atoi(optarg);
 375                         break;
 376                 case OPTION_MAX_NUM_CARDS:
 377                         global_flags.max_num_cards = atoi(optarg);
 378                         break;
 379                 case 'o':
 380                         global_flags.output_card = atoi(optarg);
 381                         break;
 382                 case 't':
 383                         global_flags.theme_filename = optarg;
 384                         break;
 385                 case 'I':
 386                         theme_dirs.push_back(optarg);
 387                         break;
 388                 case 'r':
 389                         global_flags.recording_dir = optarg;
 390                         break;
 391                 case 'm': {
 392                         char *ptr = strchr(optarg, ',');
 393                         if (ptr == nullptr) {
 394                                 fprintf(stderr, "ERROR: Invalid argument '%s' to --map-signal (needs a signal and a card number, separated by comma)\n", optarg);
 395                                 exit(1);
 396                         }
 397                         *ptr = '\0';
 398                         const int signal_num = atoi(optarg);
 399                         const int card_num = atoi(ptr + 1);
 400                         if (global_flags.default_stream_mapping.count(signal_num)) {
 401                                 fprintf(stderr, "ERROR: Signal %d already mapped to card %d\n",
 402                                         signal_num, global_flags.default_stream_mapping[signal_num]);
 403                                 exit(1);
 404                         }
 405                         global_flags.default_stream_mapping[signal_num] = card_num;
 406                         break;
 407                 }
 408                 case 'M':
 409                         global_flags.input_mapping_filename = optarg;
 410                         break;
 411                 case OPTION_MULTICHANNEL:
 412                         global_flags.multichannel_mapping_mode = true;
 413                         break;
 414                 case 'v':
 415                         global_flags.va_display = optarg;
 416                         break;
 417                 case OPTION_MIDI_MAPPING:
 418                         global_flags.midi_mapping_filename = optarg;
 419                         global_flags.multichannel_mapping_mode = true;
 420                         break;
 421                 case OPTION_DEFAULT_HDMI_INPUT:
 422                         global_flags.default_hdmi_input = true;
 423                         break;
 424                 case OPTION_FAKE_CARDS_AUDIO:
 425                         global_flags.fake_cards_audio = true;
 426                         break;
 427                 case OPTION_V4L_OUTPUT:
 428                         global_flags.v4l_output_device = optarg;
 429                         break;
 430                 case OPTION_HTTP_UNCOMPRESSED_VIDEO:
 431                         global_flags.uncompressed_video_to_http = true;
 432                         break;
 433                 case OPTION_HTTP_MUX:
 434                         global_flags.stream_mux_name = optarg;
 435                         break;
 436                 case OPTION_HTTP_AUDIO_CODEC:
 437                         global_flags.stream_audio_codec_name = optarg;
 438                         break;
 439                 case OPTION_HTTP_AUDIO_BITRATE:
 440                         global_flags.stream_audio_codec_bitrate = atoi(optarg) * 1000;
 441                         break;
 442                 case OPTION_HTTP_PORT:
 443                         global_flags.http_port = atoi(optarg);
 444                         break;
 445                 case OPTION_SRT_PORT:
 446                         global_flags.srt_port = atoi(optarg);
 447                         break;
 448                 case OPTION_NO_SRT:
 449                         global_flags.srt_port = -1;
 450                         break;
 451                 case OPTION_NO_TRANSCODE_VIDEO:
 452                         global_flags.transcode_video = false;
 453                         break;
 454                 case OPTION_NO_TRANSCODE_AUDIO:
 455                         global_flags.transcode_audio = false;
 456                         break;
 457                 case OPTION_DISABLE_AUDIO:
 458                         global_flags.transcode_audio = false;
 459                         global_flags.enable_audio = false;
 460                         break;
 461                 case OPTION_HTTP_X264_VIDEO:
 462                         global_flags.x264_video_to_http = true;
 463                         break;
 464                 case OPTION_RECORD_X264_VIDEO:
 465                         global_flags.x264_video_to_disk = true;
 466                         break;
 467                 case OPTION_SEPARATE_X264_DISK_ENCODE:
 468                         global_flags.x264_video_to_disk = true;
 469                         global_flags.x264_video_to_http = true;
 470                         global_flags.x264_separate_disk_encode = true;
 471                         break;
 472                 case OPTION_HTTP_AV1_VIDEO:
 473                         global_flags.av1_video_to_http = true;
 474                         break;
 475                 case OPTION_X264_PRESET:
 476                         global_flags.x264_preset = optarg;
 477                         break;
 478                 case OPTION_X264_TUNE:
 479                         global_flags.x264_tune = optarg;
 480                         break;
 481                 case OPTION_X264_SPEEDCONTROL:
 482                         global_flags.x264_speedcontrol = true;
 483                         break;
 484                 case OPTION_X264_SPEEDCONTROL_VERBOSE:
 485                         global_flags.x264_speedcontrol_verbose = true;
 486                         break;
 487                 case OPTION_X264_BITRATE:
 488                         global_flags.x264_bitrate = atoi(optarg);
 489                         break;
 490                 case OPTION_X264_CRF:
 491                         global_flags.x264_crf = atof(optarg);
 492                         break;
 493                 case OPTION_X264_VBV_BUFSIZE:
 494                         global_flags.x264_vbv_buffer_size = atoi(optarg);
 495                         break;
 496                 case OPTION_X264_VBV_MAX_BITRATE:
 497                         global_flags.x264_vbv_max_bitrate = atoi(optarg);
 498                         break;
 499                 case OPTION_X264_PARAM:
 500                         global_flags.x264_extra_param.push_back(optarg);
 501                         break;
 502                 case OPTION_X264_SEPARATE_DISK_PRESET:
 503                         global_flags.x264_separate_disk_preset = optarg;
 504                         break;
 505                 case OPTION_X264_SEPARATE_DISK_TUNE:
 506                         global_flags.x264_separate_disk_tune = optarg;
 507                         break;
 508                 case OPTION_X264_SEPARATE_DISK_BITRATE:
 509                         global_flags.x264_separate_disk_bitrate = atoi(optarg);
 510                         break;
 511                 case OPTION_X264_SEPARATE_DISK_CRF:
 512                         global_flags.x264_separate_disk_crf = atof(optarg);
 513                         break;
 514                 case OPTION_X264_SEPARATE_DISK_PARAM:
 515                         global_flags.x264_separate_disk_extra_param.push_back(optarg);
 516                         break;
 517                 case OPTION_AV1_PRESET:
 518                         global_flags.av1_preset = atoi(optarg);
 519                         break;
 520                 case OPTION_AV1_BITRATE:
 521                         global_flags.av1_bitrate = atoi(optarg);
 522                         break;
 523                 case OPTION_AV1_FPS: {
 524                         string str = optarg;
 525                         const size_t pos = str.find('/');
 526                         if (pos == string::npos) {
 527                                 global_flags.av1_fps_num = stoi(str);
 528                                 global_flags.av1_fps_den = 1;
 529                         } else {
 530                                 const string num = str.substr(0, pos);
 531                                 const string den = str.substr(pos + 1);
 532                                 global_flags.av1_fps_num = stoi(num);
 533                                 global_flags.av1_fps_den = stoi(den);
 534                         }
 535                         break;
 536                 }
 537                 case OPTION_AV1_PARAM:
 538                         global_flags.av1_extra_param.push_back(optarg);
 539                         break;
 540                 case OPTION_FLAT_AUDIO:
 541                         // If --flat-audio is given, turn off everything that messes with the sound,
 542                         // except the final makeup gain.
 543                         global_flags.locut_enabled = false;
 544                         global_flags.gain_staging_auto = false;
 545                         global_flags.compressor_enabled = false;
 546                         global_flags.limiter_enabled = false;
 547                         break;
 548                 case OPTION_GAIN_STAGING:
 549                         global_flags.initial_gain_staging_db = atof(optarg);
 550                         global_flags.gain_staging_auto = false;
 551                         break;
 552                 case OPTION_DISABLE_LOCUT:
 553                         global_flags.locut_enabled = false;
 554                         break;
 555                 case OPTION_ENABLE_LOCUT:
 556                         global_flags.locut_enabled = true;
 557                         break;
 558                 case OPTION_DISABLE_GAIN_STAGING_AUTO:
 559                         global_flags.gain_staging_auto = false;
 560                         break;
 561                 case OPTION_ENABLE_GAIN_STAGING_AUTO:
 562                         global_flags.gain_staging_auto = true;
 563                         break;
 564                 case OPTION_DISABLE_COMPRESSOR:
 565                         global_flags.compressor_enabled = false;
 566                         break;
 567                 case OPTION_ENABLE_COMPRESSOR:
 568                         global_flags.compressor_enabled = true;
 569                         break;
 570                 case OPTION_DISABLE_LIMITER:
 571                         global_flags.limiter_enabled = false;
 572                         break;
 573                 case OPTION_ENABLE_LIMITER:
 574                         global_flags.limiter_enabled = true;
 575                         break;
 576                 case OPTION_DISABLE_MAKEUP_GAIN_AUTO:
 577                         global_flags.final_makeup_gain_auto = false;
 578                         break;
 579                 case OPTION_ENABLE_MAKEUP_GAIN_AUTO:
 580                         global_flags.final_makeup_gain_auto = true;
 581                         break;
 582                 case OPTION_DISABLE_ALSA_OUTPUT:
 583                         global_flags.enable_alsa_output = false;
 584                         break;
 585                 case OPTION_NO_FLUSH_PBOS:
 586                         global_flags.flush_pbos = false;
 587                         break;
 588                 case OPTION_PRINT_VIDEO_LATENCY:
 589                         global_flags.print_video_latency = true;
 590                         break;
 591                 case OPTION_MAX_INPUT_QUEUE_FRAMES:
 592                         global_flags.max_input_queue_frames = atoi(optarg);
 593                         break;
 594                 case OPTION_AUDIO_QUEUE_LENGTH_MS:
 595                         global_flags.audio_queue_length_ms = atof(optarg);
 596                         break;
 597                 case OPTION_OUTPUT_YCBCR_COEFFICIENTS:
 598                         output_ycbcr_coefficients = optarg;
 599                         break;
 600                 case OPTION_OUTPUT_BUFFER_FRAMES:
 601                         global_flags.output_buffer_frames = atof(optarg);
 602                         break;
 603                 case OPTION_OUTPUT_SLOP_FRAMES:
 604                         global_flags.output_slop_frames = atof(optarg);
 605                         break;
 606                 case OPTION_OUTPUT_CARD_UNSYNCHRONIZED:
 607                         global_flags.output_card_is_master = false;
 608                         break;
 609                 case OPTION_TIMECODE_STREAM:
 610                         global_flags.display_timecode_in_stream = true;
 611                         break;
 612                 case OPTION_TIMECODE_STDOUT:
 613                         global_flags.display_timecode_on_stdout = true;
 614                         break;
 615                 case OPTION_QUICK_CUT_KEYS:
 616                         global_flags.enable_quick_cut_keys = true;
 617                         break;
 618                 case OPTION_10_BIT_INPUT:
 619                         fprintf(stderr, "NOTE: --10-bit-input is a deprecated alias for --10-bit.\n");
 620                         global_flags.bit_depth = 10;
 621                         break;
 622                 case OPTION_10_BIT_OUTPUT:
 623                         fprintf(stderr, "NOTE: --10-bit-output is a deprecated alias for --10-bit.\n");
 624                         global_flags.bit_depth = 10;
 625                         break;
 626                 case OPTION_10_BIT:
 627                         global_flags.bit_depth = 10;
 628                         break;
 629                 case OPTION_INPUT_YCBCR_INTERPRETATION: {
 630                         char *ptr = strchr(optarg, ',');
 631                         if (ptr == nullptr) {
 632                                 fprintf(stderr, "ERROR: Invalid argument '%s' to --input-ycbcr-interpretation (needs a card and an interpretation, separated by comma)\n", optarg);
 633                                 exit(1);
 634                         }
 635                         *ptr = '\0';
 636                         const int card_num = atoi(optarg);
 637                         if (card_num < 0 || card_num >= MAX_VIDEO_CARDS) {
 638                                 fprintf(stderr, "ERROR: Invalid card number %d\n", card_num);
 639                                 exit(1);
 640                         }
 641
 642                         YCbCrInterpretation interpretation;
 643                         char *interpretation_str = ptr + 1;
 644                         ptr = strchr(interpretation_str, ',');
 645                         if (ptr != nullptr) {
 646                                 *ptr = '\0';
 647                                 const char *range = ptr + 1;
 648                                 if (strcmp(range, "full") == 0) {
 649                                         interpretation.full_range = true;
 650                                 } else if (strcmp(range, "limited") == 0) {
 651                                         interpretation.full_range = false;
 652                                 } else {
 653                                         fprintf(stderr, "ERROR: Invalid Y'CbCr range '%s' (must be “full” or “limited”)\n", range);
 654                                         exit(1);
 655                                 }
 656                         }
 657
 658                         if (strcmp(interpretation_str, "rec601") == 0) {
 659                                 interpretation.ycbcr_coefficients_auto = false;
 660                                 interpretation.ycbcr_coefficients = movit::YCBCR_REC_601;
 661                         } else if (strcmp(interpretation_str, "rec709") == 0) {
 662                                 interpretation.ycbcr_coefficients_auto = false;
 663                                 interpretation.ycbcr_coefficients = movit::YCBCR_REC_709;
 664                         } else if (strcmp(interpretation_str, "auto") == 0) {
 665                                 interpretation.ycbcr_coefficients_auto = true;
 666                                 if (interpretation.full_range) {
 667                                         fprintf(stderr, "ERROR: Cannot use “auto” Y'CbCr coefficients with full range\n");
 668                                         exit(1);
 669                                 }
 670                         } else {
 671                                 fprintf(stderr, "ERROR: Invalid Y'CbCr coefficients '%s' (must be “rec601”, “rec709” or “auto”)\n", interpretation_str);
 672                                 exit(1);
 673                         }
 674                         global_flags.ycbcr_interpretation[card_num] = interpretation;
 675                         break;
 676                 }
 677                 case OPTION_FULLSCREEN:
 678                         global_flags.fullscreen = true;
 679                         break;
 680                 case OPTION_MJPEG_EXPORT_CARDS: {
 681                         if (card_to_mjpeg_stream_export_set) {
 682                                 fprintf(stderr, "ERROR: --mjpeg-export-cards given twice\n");
 683                                 exit(1);
 684                         }
 685                         global_flags.card_to_mjpeg_stream_export = parse_mjpeg_export_cards(optarg);
 686                         card_to_mjpeg_stream_export_set = true;
 687                         break;
 688                 }
 689                 case OPTION_HELP:
 690                         usage(program);
 691                         exit(0);
 692                 default:
 693                         fprintf(stderr, "Unknown option '%s'\n", argv[option_index]);
 694                         fprintf(stderr, "\n");
 695                         usage(program);
 696                         exit(1);
 697                 }
 698         }
 699
 700         if (global_flags.uncompressed_video_to_http +
 701             global_flags.x264_video_to_http +
 702             global_flags.av1_video_to_http > 1) {
 703                 fprintf(stderr, "ERROR: --http-{uncompressed,x264,av1}-video are mutually incompatible\n");
 704                 exit(1);
 705         }
 706         if (global_flags.bit_depth == 10) {
 707                 global_flags.x264_video_to_disk = true;  // No 10-bit Quick Sync support.
 708                 if (!global_flags.av1_video_to_http) {
 709                         global_flags.x264_video_to_http = true;
 710                 }
 711         }
 712         if (global_flags.x264_video_to_disk && !global_flags.uncompressed_video_to_http && !global_flags.av1_video_to_http) {
 713                 global_flags.x264_video_to_http = true;  // Quick Sync to HTTP but x264 to disk doesn't make sense.
 714         }
 715         if (global_flags.min_num_cards <= 0) {
 716                 fprintf(stderr, "ERROR: --num-cards must be at least 1\n");
 717                 exit(1);
 718         }
 719         if (global_flags.max_num_cards <= 0) {
 720                 fprintf(stderr, "ERROR: --max-num-cards must be at least 1\n");
 721                 exit(1);
 722         }
 723         if (global_flags.max_num_cards < global_flags.min_num_cards) {
 724                 fprintf(stderr, "ERROR: --max-num-cards can not be lower than --num-cards\n");
 725                 exit(1);
 726         }
 727         if (global_flags.output_card < -1 ||
 728             global_flags.output_card >= global_flags.max_num_cards) {
 729                 fprintf(stderr, "ERROR: --output-card points to a nonexistant card\n");
 730                 exit(1);
 731         }
 732         if (global_flags.enable_audio && !global_flags.transcode_audio && global_flags.stream_audio_codec_name.empty()) {
 733                 fprintf(stderr, "ERROR: If not transcoding audio, you must specify ahead-of-time what audio codec is in use\n");
 734                 fprintf(stderr, "       (using --http-audio-codec).\n");
 735                 exit(1);
 736         }
 737         if (global_flags.x264_speedcontrol) {
 738                 if (!global_flags.x264_preset.empty() && global_flags.x264_preset != "faster") {
 739                         fprintf(stderr, "WARNING: --x264-preset is overridden by --x264-speedcontrol (implicitly uses \"faster\" as base preset)\n");
 740                 }
 741                 global_flags.x264_preset = "faster";
 742         } else if (global_flags.x264_preset.empty()) {
 743                 global_flags.x264_preset = X264_DEFAULT_PRESET;
 744         }
 745         if (global_flags.x264_separate_disk_preset.empty()) {
 746                 global_flags.x264_separate_disk_preset = X264_DEFAULT_PRESET;
 747         }
 748         if (!theme_dirs.empty()) {
 749                 global_flags.theme_dirs = theme_dirs;
 750         }
 751
 752         // In reality, we could probably do with any even value (we subsample
 753         // by two in some places), but it's better to be on the safe side
 754         // wrt. video codecs and such. (I'd set 16 if I could, but 1080 isn't
 755         // divisible by 16.)
 756         if (global_flags.width <= 0 || (global_flags.width % 8) != 0 ||
 757             global_flags.height <= 0 || (global_flags.height % 8) != 0) {
 758                 fprintf(stderr, "ERROR: --width and --height must be positive integers divisible by 8\n");
 759                 exit(1);
 760         }
 761
 762         for (pair<int, int> mapping : global_flags.default_stream_mapping) {
 763                 if (mapping.second >= global_flags.max_num_cards) {
 764                         fprintf(stderr, "ERROR: Signal %d mapped to card %d, which doesn't exist (try adjusting --max-num-cards)\n",
 765                                 mapping.first, mapping.second);
 766                         exit(1);
 767                 }
 768         }
 769
 770         // Rec. 709 would be the sane thing to do, but it seems many players
 771         // just default to BT.601 coefficients no matter what. We _do_ set
 772         // the right flags, so that a player that works properly doesn't have
 773         // to guess, but it's frequently ignored. See discussions
 774         // in e.g. https://trac.ffmpeg.org/ticket/4978; the situation with
 775         // browsers is complicated and depends on things like hardware acceleration
 776         // (https://bugs.chromium.org/p/chromium/issues/detail?id=333619 for
 777         // extensive discussion). VLC generally fixed this as part of 3.0.0
 778         // (see e.g. https://github.com/videolan/vlc/commit/bc71288b2e38c07d6921472824b92eef1aa85f7e
 779         // and https://github.com/videolan/vlc/commit/c3fc2683a9cde1d42674ebf9935dced05733a215),
 780         // but earlier versions were pretty random.
 781         //
 782         // On the other hand, HDMI/SDI output typically requires Rec. 709 for
 783         // HD resolutions (with no way of signaling anything else), which is
 784         // a conflicting demand. In this case, we typically let the HDMI/SDI
 785         // output win if it is active, but the user can override this.
 786         if (output_ycbcr_coefficients == "auto") {
 787                 // Essentially: BT.709 if HDMI/SDI output is on, otherwise BT.601.
 788                 global_flags.ycbcr_rec709_coefficients = false;
 789                 global_flags.ycbcr_auto_coefficients = true;
 790         } else if (output_ycbcr_coefficients == "rec709") {
 791                 global_flags.ycbcr_rec709_coefficients = true;
 792                 global_flags.ycbcr_auto_coefficients = false;
 793         } else if (output_ycbcr_coefficients == "rec601") {
 794                 global_flags.ycbcr_rec709_coefficients = false;
 795                 global_flags.ycbcr_auto_coefficients = false;
 796         } else {
 797                 fprintf(stderr, "ERROR: --output-ycbcr-coefficients must be “rec601”, “rec709” or “auto”\n");
 798                 exit(1);
 799         }
 800
 801         if (global_flags.output_buffer_frames < 0.0f) {
 802                 // Actually, even zero probably won't make sense; there is some internal
 803                 // delay to the card.
 804                 fprintf(stderr, "ERROR: --output-buffer-frames can't be negative.\n");
 805                 exit(1);
 806         }
 807         if (global_flags.output_slop_frames < 0.0f) {
 808                 fprintf(stderr, "ERROR: --output-slop-frames can't be negative.\n");
 809                 exit(1);
 810         }
 811         if (global_flags.max_input_queue_frames < 1) {
 812                 fprintf(stderr, "ERROR: --max-input-queue-frames must be at least 1.\n");
 813                 exit(1);
 814         }
 815         if (global_flags.max_input_queue_frames > 10) {
 816                 fprintf(stderr, "WARNING: --max-input-queue-frames has little effect over 10.\n");
 817         }
 818
 819         if (!isinf(global_flags.x264_crf)) {  // CRF mode is selected.
 820                 if (global_flags.x264_bitrate != -1) {
 821                         fprintf(stderr, "ERROR: --x264-bitrate and --x264-crf are mutually incompatible.\n");
 822                         exit(1);
 823                 }
 824                 if (global_flags.x264_vbv_max_bitrate != -1 && global_flags.x264_vbv_buffer_size != -1) {
 825                         fprintf(stderr, "WARNING: VBV settings are ignored with --x264-crf.\n");
 826                 }
 827         } else if (global_flags.x264_bitrate == -1) {
 828                 global_flags.x264_bitrate = DEFAULT_X264_OUTPUT_BIT_RATE;
 829         }
 830
 831         if (!isinf(global_flags.x264_separate_disk_crf)) {  // CRF mode is selected.
 832                 if (global_flags.x264_separate_disk_bitrate != -1) {
 833                         fprintf(stderr, "ERROR: --x264-separate-disk-bitrate and --x264-separate-disk-crf are mutually incompatible.\n");
 834                         exit(1);
 835                 }
 836         } else if (global_flags.x264_separate_disk_bitrate == -1) {
 837                 global_flags.x264_separate_disk_bitrate = DEFAULT_X264_OUTPUT_BIT_RATE;
 838         }
 839
 840         if (!card_to_mjpeg_stream_export_set) {
 841                 // Fill in the default mapping (export all cards, in order).
 842                 for (unsigned card_idx = 0; card_idx < unsigned(global_flags.max_num_cards); ++card_idx) {
 843                         global_flags.card_to_mjpeg_stream_export[card_idx] = card_idx;
 844                 }
 845         }
 846 }