]> git.sesse.net Git - pistorm/blob - emulator.c
Merge pull request #5 from borb/0.x-borb
[pistorm] / emulator.c
1 #include "m68k.h"
2 #include "emulator.h"
3 #include "platforms/platforms.h"
4 #include "input/input.h"
5
6 #include "platforms/amiga/Gayle.h"
7 #include "platforms/amiga/gayle-ide/ide.h"
8 #include "platforms/amiga/amiga-registers.h"
9 #include "platforms/amiga/rtg/rtg.h"
10 #include "platforms/amiga/hunk-reloc.h"
11 #include "platforms/amiga/piscsi/piscsi.h"
12 #include "platforms/amiga/piscsi/piscsi-enums.h"
13 #include "platforms/amiga/net/pi-net.h"
14 #include "platforms/amiga/net/pi-net-enums.h"
15 #include "gpio/ps_protocol.h"
16
17 #include <assert.h>
18 #include <dirent.h>
19 #include <endian.h>
20 #include <fcntl.h>
21 #include <poll.h>
22 #include <pthread.h>
23 #include <sched.h>
24 #include <signal.h>
25 #include <stdint.h>
26 #include <stdio.h>
27 #include <stdlib.h>
28 #include <string.h>
29 #include <sys/ioctl.h>
30 #include <sys/mman.h>
31 #include <sys/stat.h>
32 #include <sys/types.h>
33 #include <unistd.h>
34
35 #define KEY_POLL_INTERVAL_MSEC 5000
36
37 unsigned char read_ranges;
38 unsigned int read_addr[8];
39 unsigned int read_upper[8];
40 unsigned char *read_data[8];
41 unsigned char write_ranges;
42 unsigned int write_addr[8];
43 unsigned int write_upper[8];
44 unsigned char *write_data[8];
45
46 int kb_hook_enabled = 0;
47 int mouse_hook_enabled = 0;
48 int cpu_emulation_running = 1;
49
50 uint8_t mouse_dx = 0, mouse_dy = 0;
51 uint8_t mouse_buttons = 0;
52 uint8_t mouse_extra = 0;
53
54 extern uint8_t gayle_int;
55 extern uint8_t gayle_ide_enabled;
56 extern uint8_t gayle_emulation_enabled;
57 extern uint8_t gayle_a4k_int;
58 extern volatile unsigned int *gpio;
59 extern volatile uint16_t srdata;
60 extern uint8_t realtime_graphics_debug;
61 uint8_t realtime_disassembly, int2_enabled = 0;
62 uint32_t do_disasm = 0, old_level;
63 char c = 0, c_code = 0, c_type = 0; // @todo temporary main/cpu_task scope workaround until input moved to a thread
64 uint32_t last_irq = 0, last_last_irq = 0;
65
66 char disasm_buf[4096];
67
68 #define KICKBASE 0xF80000
69 #define KICKSIZE 0x7FFFF
70
71 int mem_fd, mouse_fd = -1, keyboard_fd = -1;
72 int mem_fd_gpclk;
73 int irq;
74 int gayleirq;
75
76 //#define MUSASHI_HAX
77
78 #ifdef MUSASHI_HAX
79 #include "m68kcpu.h"
80 extern m68ki_cpu_core m68ki_cpu;
81 extern int m68ki_initial_cycles;
82 extern int m68ki_remaining_cycles;
83
84 #define M68K_SET_IRQ(i) old_level = CPU_INT_LEVEL; \
85         CPU_INT_LEVEL = (i << 8); \
86         if(old_level != 0x0700 && CPU_INT_LEVEL == 0x0700) \
87                 m68ki_cpu.nmi_pending = TRUE;
88 #define M68K_END_TIMESLICE      m68ki_initial_cycles = GET_CYCLES(); \
89         SET_CYCLES(0);
90 #else
91 #define M68K_SET_IRQ m68k_set_irq
92 #define M68K_END_TIMESLICE m68k_end_timeslice()
93 #endif
94
95 #define NOP asm("nop"); asm("nop"); asm("nop"); asm("nop");
96
97 #define DEBUG_EMULATOR
98 #ifdef DEBUG_EMULATOR
99 #define DEBUG printf
100 #else
101 #define DEBUG(...)
102 #endif
103
104 // Configurable emulator options
105 unsigned int cpu_type = M68K_CPU_TYPE_68000;
106 unsigned int loop_cycles = 300, irq_status = 0;
107 struct emulator_config *cfg = NULL;
108 char keyboard_file[256] = "/dev/input/event1";
109
110 uint64_t trig_irq = 0, serv_irq = 0;
111 uint16_t irq_delay = 0;
112
113 void *ipl_task(void *args) {
114   printf("IPL thread running\n");
115   uint16_t old_irq = 0;
116   uint32_t value;
117
118   while (1) {
119     value = *(gpio + 13);
120
121     if (!(value & (1 << PIN_IPL_ZERO))) {
122       irq = 1;
123       old_irq = irq_delay;
124       NOP
125       M68K_END_TIMESLICE;
126     }
127     else {
128       if (irq) {
129         if (old_irq) {
130           old_irq--;
131         }
132         else {
133           irq = 0;
134         }
135         NOP
136         M68K_END_TIMESLICE;
137       }
138     }
139
140     if (gayle_ide_enabled) {
141       if (((gayle_int & 0x80) || gayle_a4k_int) && (get_ide(0)->drive[0].intrq || get_ide(0)->drive[1].intrq)) {
142         //get_ide(0)->drive[0].intrq = 0;
143         gayleirq = 1;
144         M68K_END_TIMESLICE;
145       }
146       else
147         gayleirq = 0;
148     }
149     //usleep(0);
150     NOP NOP NOP NOP NOP NOP NOP NOP
151     NOP NOP NOP NOP NOP NOP NOP NOP
152     NOP NOP NOP NOP NOP NOP NOP NOP
153     /*NOP NOP NOP NOP NOP NOP NOP NOP
154     NOP NOP NOP NOP NOP NOP NOP NOP
155     NOP NOP NOP NOP NOP NOP NOP NOP*/
156   }
157   return args;
158 }
159
160 void *cpu_task() {
161   m68k_pulse_reset();
162
163 cpu_loop:
164   if (mouse_hook_enabled) {
165     get_mouse_status(&mouse_dx, &mouse_dy, &mouse_buttons, &mouse_extra);
166   }
167
168   if (realtime_disassembly && (do_disasm || cpu_emulation_running)) {
169     m68k_disassemble(disasm_buf, m68k_get_reg(NULL, M68K_REG_PC), cpu_type);
170     printf("REGA: 0:$%.8X 1:$%.8X 2:$%.8X 3:$%.8X 4:$%.8X 5:$%.8X 6:$%.8X 7:$%.8X\n", m68k_get_reg(NULL, M68K_REG_A0), m68k_get_reg(NULL, M68K_REG_A1), m68k_get_reg(NULL, M68K_REG_A2), m68k_get_reg(NULL, M68K_REG_A3), \
171             m68k_get_reg(NULL, M68K_REG_A4), m68k_get_reg(NULL, M68K_REG_A5), m68k_get_reg(NULL, M68K_REG_A6), m68k_get_reg(NULL, M68K_REG_A7));
172     printf("REGD: 0:$%.8X 1:$%.8X 2:$%.8X 3:$%.8X 4:$%.8X 5:$%.8X 6:$%.8X 7:$%.8X\n", m68k_get_reg(NULL, M68K_REG_D0), m68k_get_reg(NULL, M68K_REG_D1), m68k_get_reg(NULL, M68K_REG_D2), m68k_get_reg(NULL, M68K_REG_D3), \
173             m68k_get_reg(NULL, M68K_REG_D4), m68k_get_reg(NULL, M68K_REG_D5), m68k_get_reg(NULL, M68K_REG_D6), m68k_get_reg(NULL, M68K_REG_D7));
174     printf("%.8X (%.8X)]] %s\n", m68k_get_reg(NULL, M68K_REG_PC), (m68k_get_reg(NULL, M68K_REG_PC) & 0xFFFFFF), disasm_buf);
175     if (do_disasm)
176       do_disasm--;
177     m68k_execute(1);
178   }
179   else {
180     if (cpu_emulation_running)
181       m68k_execute(loop_cycles);
182   }
183
184   if (irq) {
185     while (irq) {
186       last_irq = ((read_reg() & 0xe000) >> 13);
187       if (last_irq != last_last_irq) {
188         last_last_irq = last_irq;
189         M68K_SET_IRQ(last_irq);
190       }
191       m68k_execute(5);
192     }
193     if (gayleirq && int2_enabled) {
194       write16(0xdff09c, 0x8000 | (1 << 3) && last_irq != 2);
195       last_last_irq = last_irq;
196       last_irq = 2;
197       M68K_SET_IRQ(2);
198     }
199     M68K_SET_IRQ(0);
200     last_last_irq = 0;
201   }
202   /*else {
203     if (last_irq != 0) {
204       M68K_SET_IRQ(0);
205       last_last_irq = last_irq;
206       last_irq = 0;
207     }
208   }*/
209
210   if (mouse_hook_enabled && (mouse_extra != 0x00)) {
211     // mouse wheel events have occurred; unlike l/m/r buttons, these are queued as keypresses, so add to end of buffer
212     switch (mouse_extra) {
213       case 0xff:
214         // wheel up
215         queue_keypress(0xfe, KEYPRESS_PRESS, PLATFORM_AMIGA);
216         break;
217       case 0x01:
218         // wheel down
219         queue_keypress(0xff, KEYPRESS_PRESS, PLATFORM_AMIGA);
220         break;
221     }
222
223     // dampen the scroll wheel until next while loop iteration
224     mouse_extra = 0x00;
225   }
226   goto cpu_loop;
227
228 stop_cpu_emulation:
229   printf("[CPU] End of CPU thread\n");
230 }
231
232 void *keyboard_task() {
233   struct pollfd kbdfd[1];
234   int kpoll;
235
236   printf("[KBD] Keyboard thread started\n");
237
238   kbdfd[0].fd = keyboard_fd;
239   kbdfd[0].events = POLLIN;
240
241 key_loop:
242   kpoll = poll(kbdfd, 1, KEY_POLL_INTERVAL_MSEC);
243   if ((kpoll > 0) && (kbdfd[0].revents & POLLHUP)) {
244     // in the event that a keyboard is unplugged, keyboard_task will whiz up to 100% utilisation
245     // this is undesired, so if the keyboard HUPs, end the thread without ending the emulation
246     printf("[KBD] Keyboard node returned HUP (unplugged?)\n");
247     goto key_end;
248   }
249
250   // if kpoll > 0 then it contains number of events to pull, also check if POLLIN is set in revents
251   if ((kpoll <= 0) || !(kbdfd[0].revents & POLLIN)) {
252     goto key_loop;
253   }
254
255   while (get_key_char(&c, &c_code, &c_type)) {
256     if (c && c == cfg->keyboard_toggle_key && !kb_hook_enabled) {
257       kb_hook_enabled = 1;
258       printf("Keyboard hook enabled.\n");
259     }
260     else if (kb_hook_enabled) {
261       if (c == 0x1B && c_type) {
262         kb_hook_enabled = 0;
263         printf("Keyboard hook disabled.\n");
264       }
265       else {
266         if (queue_keypress(c_code, c_type, cfg->platform->id) && int2_enabled && last_irq != 2) {
267           //last_irq = 0;
268           //M68K_SET_IRQ(2);
269         }
270       }
271     }
272
273     // pause pressed; trigger nmi (int level 7)
274     if (c == 0x01 && c_type) {
275       printf("[INT] Sending NMI\n");
276       M68K_SET_IRQ(7);
277     }
278
279     if (!kb_hook_enabled && c_type) {
280       if (c && c == cfg->mouse_toggle_key) {
281         mouse_hook_enabled ^= 1;
282         printf("Mouse hook %s.\n", mouse_hook_enabled ? "enabled" : "disabled");
283         mouse_dx = mouse_dy = mouse_buttons = mouse_extra = 0;
284       }
285       if (c == 'r') {
286         cpu_emulation_running ^= 1;
287         printf("CPU emulation is now %s\n", cpu_emulation_running ? "running" : "stopped");
288       }
289       if (c == 'g') {
290         realtime_graphics_debug ^= 1;
291         printf("Real time graphics debug is now %s\n", realtime_graphics_debug ? "on" : "off");
292       }
293       if (c == 'R') {
294         cpu_pulse_reset();
295         //m68k_pulse_reset();
296         printf("CPU emulation reset.\n");
297       }
298       // @todo work out how to signal the main process that we want to quit
299       // if (c == 'q') {
300       //   printf("Quitting and exiting emulator.\n");
301       //   goto stop_cpu_emulation;
302       // }
303       if (c == 'd') {
304         realtime_disassembly ^= 1;
305         do_disasm = 1;
306         printf("Real time disassembly is now %s\n", realtime_disassembly ? "on" : "off");
307       }
308       if (c == 'D') {
309         int r = get_mapped_item_by_address(cfg, 0x08000000);
310         if (r != -1) {
311           printf("Dumping first 16MB of mapped range %d.\n", r);
312           FILE *dmp = fopen("./memdmp.bin", "wb+");
313           fwrite(cfg->map_data[r], 16 * SIZE_MEGA, 1, dmp);
314           fclose(dmp);
315         }
316       }
317       if (c == 's' && realtime_disassembly) {
318         do_disasm = 1;
319       }
320       if (c == 'S' && realtime_disassembly) {
321         do_disasm = 128;
322       }
323     }
324   }
325
326   goto key_loop;
327
328 key_end:
329   printf("[KBD] Keyboard thread ending\n");
330 }
331
332 void stop_cpu_emulation(uint8_t disasm_cur) {
333   M68K_END_TIMESLICE;
334   if (disasm_cur) {
335     m68k_disassemble(disasm_buf, m68k_get_reg(NULL, M68K_REG_PC), cpu_type);
336     printf("REGA: 0:$%.8X 1:$%.8X 2:$%.8X 3:$%.8X 4:$%.8X 5:$%.8X 6:$%.8X 7:$%.8X\n", m68k_get_reg(NULL, M68K_REG_A0), m68k_get_reg(NULL, M68K_REG_A1), m68k_get_reg(NULL, M68K_REG_A2), m68k_get_reg(NULL, M68K_REG_A3), \
337             m68k_get_reg(NULL, M68K_REG_A4), m68k_get_reg(NULL, M68K_REG_A5), m68k_get_reg(NULL, M68K_REG_A6), m68k_get_reg(NULL, M68K_REG_A7));
338     printf("REGD: 0:$%.8X 1:$%.8X 2:$%.8X 3:$%.8X 4:$%.8X 5:$%.8X 6:$%.8X 7:$%.8X\n", m68k_get_reg(NULL, M68K_REG_D0), m68k_get_reg(NULL, M68K_REG_D1), m68k_get_reg(NULL, M68K_REG_D2), m68k_get_reg(NULL, M68K_REG_D3), \
339             m68k_get_reg(NULL, M68K_REG_D4), m68k_get_reg(NULL, M68K_REG_D5), m68k_get_reg(NULL, M68K_REG_D6), m68k_get_reg(NULL, M68K_REG_D7));
340     printf("%.8X (%.8X)]] %s\n", m68k_get_reg(NULL, M68K_REG_PC), (m68k_get_reg(NULL, M68K_REG_PC) & 0xFFFFFF), disasm_buf);
341     realtime_disassembly = 1;
342   }
343
344   cpu_emulation_running = 0;
345   do_disasm = 0;
346 }
347
348 unsigned int ovl;
349 static volatile unsigned char maprom;
350
351 void sigint_handler(int sig_num) {
352   //if (sig_num) { }
353   //cpu_emulation_running = 0;
354
355   //return;
356   printf("Received sigint %d, exiting.\n", sig_num);
357   if (mouse_fd != -1)
358     close(mouse_fd);
359   if (mem_fd)
360     close(mem_fd);
361
362   if (cfg->platform->shutdown) {
363     cfg->platform->shutdown(cfg);
364   }
365
366   printf("IRQs triggered: %lld\n", trig_irq);
367   printf("IRQs serviced: %lld\n", serv_irq);
368
369   exit(0);
370 }
371
372 int main(int argc, char *argv[]) {
373   int g;
374   //const struct sched_param priority = {99};
375
376   if (argc > 1) {
377     irq_delay = atoi(argv[1]);
378     printf("Setting IRQ delay to %d loops (%s).\n", irq_delay, argv[1]);
379   }
380
381   // Some command line switch stuffles
382   for (g = 1; g < argc; g++) {
383     if (strcmp(argv[g], "--cpu_type") == 0 || strcmp(argv[g], "--cpu") == 0) {
384       if (g + 1 >= argc) {
385         printf("%s switch found, but no CPU type specified.\n", argv[g]);
386       } else {
387         g++;
388         cpu_type = get_m68k_cpu_type(argv[g]);
389       }
390     }
391     else if (strcmp(argv[g], "--config-file") == 0 || strcmp(argv[g], "--config") == 0) {
392       if (g + 1 >= argc) {
393         printf("%s switch found, but no config filename specified.\n", argv[g]);
394       } else {
395         g++;
396         cfg = load_config_file(argv[g]);
397       }
398     }
399     else if (strcmp(argv[g], "--keyboard-file") == 0 || strcmp(argv[g], "--kbfile") == 0) {
400       if (g + 1 >= argc) {
401         printf("%s switch found, but no keyboard device path specified.\n", argv[g]);
402       } else {
403         g++;
404         strcpy(keyboard_file, argv[g]);
405       }
406     }
407   }
408
409   if (!cfg) {
410     printf("No config file specified. Trying to load default.cfg...\n");
411     cfg = load_config_file("default.cfg");
412     if (!cfg) {
413       printf("Couldn't load default.cfg, empty emulator config will be used.\n");
414       cfg = (struct emulator_config *)calloc(1, sizeof(struct emulator_config));
415       if (!cfg) {
416         printf("Failed to allocate memory for emulator config!\n");
417         return 1;
418       }
419       memset(cfg, 0x00, sizeof(struct emulator_config));
420     }
421   }
422
423   if (cfg) {
424     if (cfg->cpu_type) cpu_type = cfg->cpu_type;
425     if (cfg->loop_cycles) loop_cycles = cfg->loop_cycles;
426
427     if (!cfg->platform)
428       cfg->platform = make_platform_config("none", "generic");
429     cfg->platform->platform_initial_setup(cfg);
430   }
431
432   if (cfg->mouse_enabled) {
433     mouse_fd = open(cfg->mouse_file, O_RDWR | O_NONBLOCK);
434     if (mouse_fd == -1) {
435       printf("Failed to open %s, can't enable mouse hook.\n", cfg->mouse_file);
436       cfg->mouse_enabled = 0;
437     } else {
438       /**
439        * *-*-*-* magic numbers! *-*-*-*
440        * great, so waaaay back in the history of the pc, the ps/2 protocol set the standard for mice
441        * and in the process, the mouse sample rate was defined as a way of putting mice into vendor-specific modes.
442        * as the ancient gpm command explains, almost everything except incredibly old mice talk the IntelliMouse
443        * protocol, which reports four bytes. by default, every mouse starts in 3-byte mode (don't report wheel or
444        * additional buttons) until imps2 magic is sent. so, command $f3 is "set sample rate", followed by a byte.
445        */
446       uint8_t mouse_init[] = { 0xf4, 0xf3, 0x64 }; // enable, then set sample rate 100
447       uint8_t imps2_init[] = { 0xf3, 0xc8, 0xf3, 0x64, 0xf3, 0x50 }; // magic sequence; set sample 200, 100, 80
448       if (write(mouse_fd, mouse_init, sizeof(mouse_init)) != -1) {
449         if (write(mouse_fd, imps2_init, sizeof(imps2_init)) == -1)
450           printf("[MOUSE] Couldn't enable scroll wheel events; is this mouse from the 1980s?\n");
451       } else
452         printf("[MOUSE] Mouse didn't respond to normal PS/2 init; have you plugged a brick in by mistake?\n");
453     }
454   }
455
456   keyboard_fd = open(keyboard_file, O_RDONLY | O_NONBLOCK);
457   if (keyboard_fd == -1) {
458     printf("Failed to open keyboard event source.\n");
459   }
460
461   InitGayle();
462
463   signal(SIGINT, sigint_handler);
464   /*setup_io();
465
466   //goto skip_everything;
467
468   // Enable 200MHz CLK output on GPIO4, adjust divider and pll source depending
469   // on pi model
470   printf("Enable 200MHz GPCLK0 on GPIO4\n");
471   gpio_enable_200mhz();
472
473   // reset cpld statemachine first
474
475   write_reg(0x01);
476   usleep(100);
477   usleep(1500);
478   write_reg(0x00);
479   usleep(100);
480
481   // reset amiga and statemachine
482   skip_everything:;
483
484   usleep(1500);
485
486   m68k_init();
487   printf("Setting CPU type to %d.\n", cpu_type);
488   m68k_set_cpu_type(cpu_type);
489   cpu_pulse_reset();
490
491   if (maprom == 1) {
492     m68k_set_reg(M68K_REG_PC, 0xF80002);
493   } else {
494     m68k_set_reg(M68K_REG_PC, 0x0);
495   }*/
496   ps_setup_protocol();
497   ps_reset_state_machine();
498   ps_pulse_reset();
499
500   usleep(1500);
501   m68k_init();
502   printf("Setting CPU type to %d.\n", cpu_type);
503   m68k_set_cpu_type(cpu_type);
504   cpu_pulse_reset();
505
506   pthread_t ipl_tid, cpu_tid, kbd_tid;
507   int err;
508   err = pthread_create(&ipl_tid, NULL, &ipl_task, NULL);
509   if (err != 0)
510     printf("[ERROR] Cannot create IPL thread: [%s]", strerror(err));
511   else {
512     pthread_setname_np(ipl_tid, "pistorm: ipl");
513     printf("IPL thread created successfully\n");
514   }
515
516   // create keyboard task
517   err = pthread_create(&kbd_tid, NULL, &keyboard_task, NULL);
518   if (err != 0)
519     printf("[ERROR] Cannot create keyboard thread: [%s]", strerror(err));
520   else {
521     pthread_setname_np(kbd_tid, "pistorm: kbd");
522     printf("[MAIN] Keyboard thread created successfully\n");
523   }
524
525   // create cpu task
526   err = pthread_create(&cpu_tid, NULL, &cpu_task, NULL);
527   if (err != 0)
528     printf("[ERROR] Cannot create CPU thread: [%s]", strerror(err));
529   else {
530     pthread_setname_np(cpu_tid, "pistorm: cpu");
531     printf("[MAIN] CPU thread created successfully\n");
532   }
533
534   // wait for cpu task to end before closing up and finishing
535   pthread_join(cpu_tid, NULL);
536   printf("[MAIN] All threads appear to have concluded; ending process\n");
537
538   if (mouse_fd != -1)
539     close(mouse_fd);
540   if (mem_fd)
541     close(mem_fd);
542
543   return 0;
544 }
545
546 void cpu_pulse_reset(void) {
547   ps_pulse_reset();
548   //write_reg(0x00);
549   // printf("Status Reg%x\n",read_reg());
550   //usleep(100000);
551   //write_reg(0x02);
552   // printf("Status Reg%x\n",read_reg());
553   if (cfg->platform->handle_reset)
554     cfg->platform->handle_reset(cfg);
555
556   m68k_write_memory_16(INTENA, 0x7FFF);
557   ovl = 1;
558   m68k_write_memory_8(0xbfe201, 0x0001);  // AMIGA OVL
559   m68k_write_memory_8(0xbfe001, 0x0001);  // AMIGA OVL high (ROM@0x0)
560
561   m68k_pulse_reset();
562 }
563
564 int cpu_irq_ack(int level) {
565   printf("cpu irq ack\n");
566   return level;
567 }
568
569 static unsigned int target = 0;
570 static uint8_t send_keypress = 0;
571
572 uint8_t cdtv_dmac_reg_idx_read();
573 void cdtv_dmac_reg_idx_write(uint8_t value);
574 uint32_t cdtv_dmac_read(uint32_t address, uint8_t type);
575 void cdtv_dmac_write(uint32_t address, uint32_t value, uint8_t type);
576
577 #define PLATFORM_CHECK_READ(a) \
578   if (address >= cfg->custom_low && address < cfg->custom_high) { \
579     unsigned int target = 0; \
580     switch(cfg->platform->id) { \
581       case PLATFORM_AMIGA: { \
582         if (address >= PISCSI_OFFSET && address < PISCSI_UPPER) { \
583           return handle_piscsi_read(address, a); \
584         } \
585         if (address >= PINET_OFFSET && address < PINET_UPPER) { \
586           return handle_pinet_read(address, a); \
587         } \
588         if (address >= PIGFX_RTG_BASE && address < PIGFX_UPPER) { \
589           return rtg_read((address & 0x0FFFFFFF), a); \
590         } \
591         if (custom_read_amiga(cfg, address, &target, a) != -1) { \
592           return target; \
593         } \
594         break; \
595       } \
596       default: \
597         break; \
598     } \
599   } \
600   if (ovl || (address >= cfg->mapped_low && address < cfg->mapped_high)) { \
601     if (handle_mapped_read(cfg, address, &target, a) != -1) \
602       return target; \
603   }
604
605 unsigned int m68k_read_memory_8(unsigned int address) {
606   PLATFORM_CHECK_READ(OP_TYPE_BYTE);
607
608   /*if (address >= 0xE90000 && address < 0xF00000) {
609     printf("BYTE read from DMAC @%.8X:", address);
610     uint32_t v = cdtv_dmac_read(address & 0xFFFF, OP_TYPE_BYTE);
611     printf("%.2X\n", v);
612     M68K_END_TIMESLICE;
613     cpu_emulation_running = 0;
614     return v;
615   }*/
616
617   /*if (m68k_get_reg(NULL, M68K_REG_PC) >= 0x080032F0 && m68k_get_reg(NULL, M68K_REG_PC) <= 0x080032F0 + 0x4000) {
618     stop_cpu_emulation(1);
619   }*/
620
621
622   if (address & 0xFF000000)
623     return 0;
624
625   unsigned char result = (unsigned int)read8((uint32_t)address);
626
627   if (mouse_hook_enabled) {
628     if (address == CIAAPRA) {
629       if (mouse_buttons & 0x01) {
630         //mouse_buttons -= 1;
631         return (unsigned int)(result ^ 0x40);
632       }
633
634       return (unsigned int)result;
635     }
636   }
637
638   if (kb_hook_enabled) {
639     if (address == CIAAICR) {
640       if (get_num_kb_queued() && (!send_keypress || send_keypress == 1)) {
641         result |= 0x08;
642         if (!send_keypress)
643           send_keypress = 1;
644       }
645       if (send_keypress == 2) {
646         //result |= 0x02;
647         send_keypress = 0;
648       }
649       return result;
650     }
651     if (address == CIAADAT) {
652       //if (send_keypress) {
653         uint8_t c = 0, t = 0;
654         pop_queued_key(&c, &t);
655         t ^= 0x01;
656         result = ((c << 1) | t) ^ 0xFF;
657         send_keypress = 2;
658         //M68K_SET_IRQ(0);
659       //}
660       return result;
661     }
662   }
663
664   return result;
665 }
666
667 unsigned int m68k_read_memory_16(unsigned int address) {
668   PLATFORM_CHECK_READ(OP_TYPE_WORD);
669
670   /*if (m68k_get_reg(NULL, M68K_REG_PC) >= 0x080032F0 && m68k_get_reg(NULL, M68K_REG_PC) <= 0x080032F0 + 0x4000) {
671     stop_cpu_emulation(1);
672   }*/
673
674   /*if (address >= 0xE90000 && address < 0xF00000) {
675     printf("WORD read from DMAC @%.8X:", address);
676     uint32_t v = cdtv_dmac_read(address & 0xFFFF, OP_TYPE_WORD);
677     printf("%.2X\n", v);
678     M68K_END_TIMESLICE;
679     cpu_emulation_running = 0;
680     return v;
681   }*/
682
683   if (mouse_hook_enabled) {
684     if (address == JOY0DAT) {
685       // Forward mouse valueses to Amyga.
686       unsigned short result = (mouse_dy << 8) | (mouse_dx);
687       return (unsigned int)result;
688     }
689     /*if (address == CIAAPRA) {
690       unsigned short result = (unsigned int)read16((uint32_t)address);
691       if (mouse_buttons & 0x01) {
692         return (unsigned int)(result | 0x40);
693       }
694       else
695           return (unsigned int)result;
696     }*/
697     if (address == POTGOR) {
698       unsigned short result = (unsigned int)read16((uint32_t)address);
699       // bit 1 rmb, bit 2 mmb
700       if (mouse_buttons & 0x06) {
701         return (unsigned int)((result ^ ((mouse_buttons & 0x02) << 9))   // move rmb to bit 10
702                             & (result ^ ((mouse_buttons & 0x04) << 6))); // move mmb to bit 8
703       }
704       return (unsigned int)(result & 0xfffd);
705     }
706   }
707
708   if (address & 0xFF000000)
709     return 0;
710
711   if (address & 0x01) {
712     return ((read8(address) << 8) | read8(address + 1));
713   }
714   return (unsigned int)read16((uint32_t)address);
715 }
716
717 unsigned int m68k_read_memory_32(unsigned int address) {
718   PLATFORM_CHECK_READ(OP_TYPE_LONGWORD);
719
720   /*if (m68k_get_reg(NULL, M68K_REG_PC) >= 0x080032F0 && m68k_get_reg(NULL, M68K_REG_PC) <= 0x080032F0 + 0x4000) {
721     stop_cpu_emulation(1);
722   }*/
723
724   /*if (address >= 0xE90000 && address < 0xF00000) {
725     printf("LONGWORD read from DMAC @%.8X:", address);
726     uint32_t v = cdtv_dmac_read(address & 0xFFFF, OP_TYPE_LONGWORD);
727     printf("%.2X\n", v);
728     M68K_END_TIMESLICE;
729     cpu_emulation_running = 0;
730     return v;
731   }*/
732
733   if (address & 0xFF000000)
734     return 0;
735
736   if (address & 0x01) {
737     uint32_t c = read8(address);
738     c |= (be16toh(read16(address+1)) << 8);
739     c |= (read8(address + 3) << 24);
740     return htobe32(c);
741   }
742   uint16_t a = read16(address);
743   uint16_t b = read16(address + 2);
744   return (a << 16) | b;
745 }
746
747 #define PLATFORM_CHECK_WRITE(a) \
748   if (address >= cfg->custom_low && address < cfg->custom_high) { \
749     switch(cfg->platform->id) { \
750       case PLATFORM_AMIGA: { \
751         if (address >= PISCSI_OFFSET && address < PISCSI_UPPER) { \
752           handle_piscsi_write(address, value, a); \
753         } \
754         if (address >= PINET_OFFSET && address < PINET_UPPER) { \
755           handle_pinet_write(address, value, a); \
756         } \
757         if (address >= PIGFX_RTG_BASE && address < PIGFX_UPPER) { \
758           rtg_write((address & 0x0FFFFFFF), value, a); \
759           return; \
760         } \
761         if (custom_write_amiga(cfg, address, value, a) != -1) { \
762           return; \
763         } \
764         break; \
765       } \
766       default: \
767         break; \
768     } \
769   } \
770   if (address >= cfg->mapped_low && address < cfg->mapped_high) { \
771     if (handle_mapped_write(cfg, address, value, a) != -1) \
772       return; \
773   }
774
775 void m68k_write_memory_8(unsigned int address, unsigned int value) {
776   PLATFORM_CHECK_WRITE(OP_TYPE_BYTE);
777
778   /*if (address >= 0xE90000 && address < 0xF00000) {
779     printf("BYTE write to DMAC @%.8X: %.2X\n", address, value);
780     cdtv_dmac_write(address & 0xFFFF, value, OP_TYPE_BYTE);
781     M68K_END_TIMESLICE;
782     cpu_emulation_running = 0;
783     return;
784   }*/
785
786   if (address == 0xbfe001) {
787     if (ovl != (value & (1 << 0))) {
788       ovl = (value & (1 << 0));
789       printf("OVL:%x\n", ovl);
790     }
791   }
792
793   if (address & 0xFF000000)
794     return;
795
796   write8((uint32_t)address, value);
797   return;
798 }
799
800 void m68k_write_memory_16(unsigned int address, unsigned int value) {
801   PLATFORM_CHECK_WRITE(OP_TYPE_WORD);
802
803   /*if (address >= 0xE90000 && address < 0xF00000) {
804     printf("WORD write to DMAC @%.8X: %.4X\n", address, value);
805     cdtv_dmac_write(address & 0xFFFF, value, OP_TYPE_WORD);
806     M68K_END_TIMESLICE;
807     cpu_emulation_running = 0;
808     return;
809   }*/
810
811   if (address == 0xDFF030) {
812     char *serdat = (char *)&value;
813     // SERDAT word. see amiga dev docs appendix a; upper byte is control codes, and bit 0 is always 1.
814     // ignore this upper byte as it's not viewable data, only display lower byte.
815     printf("%c", serdat[0]);
816   }
817   if (address == 0xDFF09A) {
818     if (!(value & 0x8000)) {
819       if (value & 0x04) {
820         int2_enabled = 0;
821       }
822     }
823     else if (value & 0x04) {
824       int2_enabled = 1;
825     }
826   }
827
828   if (address & 0xFF000000)
829     return;
830
831   if (address & 0x01)
832     printf("Unaligned WORD write!\n");
833
834   write16((uint32_t)address, value);
835   return;
836 }
837
838 void m68k_write_memory_32(unsigned int address, unsigned int value) {
839   PLATFORM_CHECK_WRITE(OP_TYPE_LONGWORD);
840
841   /*if (address >= 0xE90000 && address < 0xF00000) {
842     printf("LONGWORD write to DMAC @%.8X: %.8X\n", address, value);
843     cdtv_dmac_write(address & 0xFFFF, value, OP_TYPE_LONGWORD);
844     M68K_END_TIMESLICE;
845     cpu_emulation_running = 0;
846     return;
847   }*/
848
849   if (address & 0xFF000000)
850     return;
851
852   if (address & 0x01)
853     printf("Unaligned LONGWORD write!\n");
854
855   write16(address, value >> 16);
856   write16(address + 2, value);
857   return;
858 }