]> git.sesse.net Git - pistorm/blob - emulator.c
Merge pull request #12 from beeanyew/wip-crap
[pistorm] / emulator.c
1 #include "m68k.h"
2 #include "emulator.h"
3 #include "platforms/platforms.h"
4 #include "input/input.h"
5
6 #include "platforms/amiga/Gayle.h"
7 #include "platforms/amiga/gayle-ide/ide.h"
8 #include "platforms/amiga/amiga-registers.h"
9 #include "platforms/amiga/rtg/rtg.h"
10 #include "platforms/amiga/hunk-reloc.h"
11 #include "platforms/amiga/piscsi/piscsi.h"
12 #include "platforms/amiga/piscsi/piscsi-enums.h"
13 #include "platforms/amiga/net/pi-net.h"
14 #include "platforms/amiga/net/pi-net-enums.h"
15 #include "gpio/ps_protocol.h"
16
17 #include <assert.h>
18 #include <dirent.h>
19 #include <endian.h>
20 #include <fcntl.h>
21 #include <poll.h>
22 #include <pthread.h>
23 #include <sched.h>
24 #include <signal.h>
25 #include <stdint.h>
26 #include <stdio.h>
27 #include <stdlib.h>
28 #include <string.h>
29 #include <sys/ioctl.h>
30 #include <sys/mman.h>
31 #include <sys/stat.h>
32 #include <sys/types.h>
33 #include <unistd.h>
34
35 #define KEY_POLL_INTERVAL_MSEC 5000
36
37 unsigned char read_ranges;
38 unsigned int read_addr[8];
39 unsigned int read_upper[8];
40 unsigned char *read_data[8];
41 unsigned char write_ranges;
42 unsigned int write_addr[8];
43 unsigned int write_upper[8];
44 unsigned char *write_data[8];
45
46 int kb_hook_enabled = 0;
47 int mouse_hook_enabled = 0;
48 int cpu_emulation_running = 1;
49
50 uint8_t mouse_dx = 0, mouse_dy = 0;
51 uint8_t mouse_buttons = 0;
52 uint8_t mouse_extra = 0;
53
54 extern uint8_t gayle_int;
55 extern uint8_t gayle_ide_enabled;
56 extern uint8_t gayle_emulation_enabled;
57 extern uint8_t gayle_a4k_int;
58 extern volatile unsigned int *gpio;
59 extern volatile uint16_t srdata;
60 extern uint8_t realtime_graphics_debug;
61 uint8_t realtime_disassembly, int2_enabled = 0;
62 uint32_t do_disasm = 0, old_level;
63 char c = 0, c_code = 0, c_type = 0; // @todo temporary main/cpu_task scope workaround until input moved to a thread
64 uint32_t last_irq = 8, last_last_irq = 8;
65
66 char disasm_buf[4096];
67
68 #define KICKBASE 0xF80000
69 #define KICKSIZE 0x7FFFF
70
71 int mem_fd, mouse_fd = -1, keyboard_fd = -1;
72 int mem_fd_gpclk;
73 int irq;
74 int gayleirq;
75
76 #define MUSASHI_HAX
77
78 #ifdef MUSASHI_HAX
79 #include "m68kcpu.h"
80 extern m68ki_cpu_core m68ki_cpu;
81 extern int m68ki_initial_cycles;
82 extern int m68ki_remaining_cycles;
83
84 #define M68K_SET_IRQ(i) old_level = CPU_INT_LEVEL; \
85         CPU_INT_LEVEL = (i << 8); \
86         if(old_level != 0x0700 && CPU_INT_LEVEL == 0x0700) \
87                 m68ki_cpu.nmi_pending = TRUE;
88 #define M68K_END_TIMESLICE      m68ki_initial_cycles = GET_CYCLES(); \
89         SET_CYCLES(0);
90 #else
91 #define M68K_SET_IRQ m68k_set_irq
92 #define M68K_END_TIMESLICE m68k_end_timeslice()
93 #endif
94
95 #define NOP asm("nop"); asm("nop"); asm("nop"); asm("nop");
96
97 #define DEBUG_EMULATOR
98 #ifdef DEBUG_EMULATOR
99 #define DEBUG printf
100 #else
101 #define DEBUG(...)
102 #endif
103
104 // Configurable emulator options
105 unsigned int cpu_type = M68K_CPU_TYPE_68000;
106 unsigned int loop_cycles = 300, irq_status = 0;
107 struct emulator_config *cfg = NULL;
108 char keyboard_file[256] = "/dev/input/event1";
109
110 uint64_t trig_irq = 0, serv_irq = 0;
111 uint16_t irq_delay = 0;
112
113 void *ipl_task(void *args) {
114   printf("IPL thread running\n");
115   uint16_t old_irq = 0;
116   uint32_t value;
117
118   while (1) {
119     value = *(gpio + 13);
120
121     if (!(value & (1 << PIN_IPL_ZERO))) {
122       irq = 1;
123       old_irq = irq_delay;
124       //NOP
125       M68K_END_TIMESLICE;
126       NOP
127       //usleep(0);
128     }
129     else {
130       if (irq) {
131         if (old_irq) {
132           old_irq--;
133         }
134         else {
135           irq = 0;
136         }
137         M68K_END_TIMESLICE;
138         NOP
139         //usleep(0);
140       }
141     }
142
143     /*if (gayle_ide_enabled) {
144       if (((gayle_int & 0x80) || gayle_a4k_int) && (get_ide(0)->drive[0].intrq || get_ide(0)->drive[1].intrq)) {
145         //get_ide(0)->drive[0].intrq = 0;
146         gayleirq = 1;
147         M68K_END_TIMESLICE;
148       }
149       else
150         gayleirq = 0;
151     }*/
152     //usleep(0);
153     //NOP NOP
154     NOP NOP NOP NOP NOP NOP NOP NOP
155     //NOP NOP NOP NOP NOP NOP NOP NOP
156     //NOP NOP NOP NOP NOP NOP NOP NOP
157     /*NOP NOP NOP NOP NOP NOP NOP NOP
158     NOP NOP NOP NOP NOP NOP NOP NOP
159     NOP NOP NOP NOP NOP NOP NOP NOP*/
160   }
161   return args;
162 }
163
164 void *cpu_task() {
165   m68k_pulse_reset();
166
167 cpu_loop:
168   if (mouse_hook_enabled) {
169     get_mouse_status(&mouse_dx, &mouse_dy, &mouse_buttons, &mouse_extra);
170   }
171
172   if (realtime_disassembly && (do_disasm || cpu_emulation_running)) {
173     m68k_disassemble(disasm_buf, m68k_get_reg(NULL, M68K_REG_PC), cpu_type);
174     printf("REGA: 0:$%.8X 1:$%.8X 2:$%.8X 3:$%.8X 4:$%.8X 5:$%.8X 6:$%.8X 7:$%.8X\n", m68k_get_reg(NULL, M68K_REG_A0), m68k_get_reg(NULL, M68K_REG_A1), m68k_get_reg(NULL, M68K_REG_A2), m68k_get_reg(NULL, M68K_REG_A3), \
175             m68k_get_reg(NULL, M68K_REG_A4), m68k_get_reg(NULL, M68K_REG_A5), m68k_get_reg(NULL, M68K_REG_A6), m68k_get_reg(NULL, M68K_REG_A7));
176     printf("REGD: 0:$%.8X 1:$%.8X 2:$%.8X 3:$%.8X 4:$%.8X 5:$%.8X 6:$%.8X 7:$%.8X\n", m68k_get_reg(NULL, M68K_REG_D0), m68k_get_reg(NULL, M68K_REG_D1), m68k_get_reg(NULL, M68K_REG_D2), m68k_get_reg(NULL, M68K_REG_D3), \
177             m68k_get_reg(NULL, M68K_REG_D4), m68k_get_reg(NULL, M68K_REG_D5), m68k_get_reg(NULL, M68K_REG_D6), m68k_get_reg(NULL, M68K_REG_D7));
178     printf("%.8X (%.8X)]] %s\n", m68k_get_reg(NULL, M68K_REG_PC), (m68k_get_reg(NULL, M68K_REG_PC) & 0xFFFFFF), disasm_buf);
179     if (do_disasm)
180       do_disasm--;
181     m68k_execute(1);
182   }
183   else {
184     if (cpu_emulation_running)
185       m68k_execute(loop_cycles);
186   }
187
188   if (irq) {
189     while (irq) {
190       last_irq = ((read_reg() & 0xe000) >> 13);
191       if (last_irq != last_last_irq) {
192         last_last_irq = last_irq;
193         M68K_SET_IRQ(last_irq);
194       }
195       m68k_execute(5);
196     }
197     if (gayleirq && int2_enabled) {
198       write16(0xdff09c, 0x8000 | (1 << 3) && last_irq != 2);
199       last_last_irq = last_irq;
200       last_irq = 2;
201       M68K_SET_IRQ(2);
202     }
203     M68K_SET_IRQ(0);
204     last_last_irq = 0;
205     m68k_execute(5);
206   }
207   /*else {
208     if (last_irq != 0) {
209       M68K_SET_IRQ(0);
210       last_last_irq = last_irq;
211       last_irq = 0;
212     }
213   }*/
214
215   if (mouse_hook_enabled && (mouse_extra != 0x00)) {
216     // mouse wheel events have occurred; unlike l/m/r buttons, these are queued as keypresses, so add to end of buffer
217     switch (mouse_extra) {
218       case 0xff:
219         // wheel up
220         queue_keypress(0xfe, KEYPRESS_PRESS, PLATFORM_AMIGA);
221         break;
222       case 0x01:
223         // wheel down
224         queue_keypress(0xff, KEYPRESS_PRESS, PLATFORM_AMIGA);
225         break;
226     }
227
228     // dampen the scroll wheel until next while loop iteration
229     mouse_extra = 0x00;
230   }
231   goto cpu_loop;
232
233 stop_cpu_emulation:
234   printf("[CPU] End of CPU thread\n");
235 }
236
237 void *keyboard_task() {
238   struct pollfd kbdfd[1];
239   int kpoll;
240
241   printf("[KBD] Keyboard thread started\n");
242
243   kbdfd[0].fd = keyboard_fd;
244   kbdfd[0].events = POLLIN;
245
246 key_loop:
247   kpoll = poll(kbdfd, 1, KEY_POLL_INTERVAL_MSEC);
248   if ((kpoll > 0) && (kbdfd[0].revents & POLLHUP)) {
249     // in the event that a keyboard is unplugged, keyboard_task will whiz up to 100% utilisation
250     // this is undesired, so if the keyboard HUPs, end the thread without ending the emulation
251     printf("[KBD] Keyboard node returned HUP (unplugged?)\n");
252     goto key_end;
253   }
254
255   // if kpoll > 0 then it contains number of events to pull, also check if POLLIN is set in revents
256   if ((kpoll <= 0) || !(kbdfd[0].revents & POLLIN)) {
257     goto key_loop;
258   }
259
260   while (get_key_char(&c, &c_code, &c_type)) {
261     if (c && c == cfg->keyboard_toggle_key && !kb_hook_enabled) {
262       kb_hook_enabled = 1;
263       printf("Keyboard hook enabled.\n");
264     }
265     else if (kb_hook_enabled) {
266       if (c == 0x1B && c_type) {
267         kb_hook_enabled = 0;
268         printf("Keyboard hook disabled.\n");
269       }
270       else {
271         if (queue_keypress(c_code, c_type, cfg->platform->id) && int2_enabled && last_irq != 2) {
272           //last_irq = 0;
273           //M68K_SET_IRQ(2);
274         }
275       }
276     }
277
278     // pause pressed; trigger nmi (int level 7)
279     if (c == 0x01 && c_type) {
280       printf("[INT] Sending NMI\n");
281       M68K_SET_IRQ(7);
282     }
283
284     if (!kb_hook_enabled && c_type) {
285       if (c && c == cfg->mouse_toggle_key) {
286         mouse_hook_enabled ^= 1;
287         printf("Mouse hook %s.\n", mouse_hook_enabled ? "enabled" : "disabled");
288         mouse_dx = mouse_dy = mouse_buttons = mouse_extra = 0;
289       }
290       if (c == 'r') {
291         cpu_emulation_running ^= 1;
292         printf("CPU emulation is now %s\n", cpu_emulation_running ? "running" : "stopped");
293       }
294       if (c == 'g') {
295         realtime_graphics_debug ^= 1;
296         printf("Real time graphics debug is now %s\n", realtime_graphics_debug ? "on" : "off");
297       }
298       if (c == 'R') {
299         cpu_pulse_reset();
300         //m68k_pulse_reset();
301         printf("CPU emulation reset.\n");
302       }
303       // @todo work out how to signal the main process that we want to quit
304       // if (c == 'q') {
305       //   printf("Quitting and exiting emulator.\n");
306       //   goto stop_cpu_emulation;
307       // }
308       if (c == 'd') {
309         realtime_disassembly ^= 1;
310         do_disasm = 1;
311         printf("Real time disassembly is now %s\n", realtime_disassembly ? "on" : "off");
312       }
313       if (c == 'D') {
314         int r = get_mapped_item_by_address(cfg, 0x08000000);
315         if (r != -1) {
316           printf("Dumping first 16MB of mapped range %d.\n", r);
317           FILE *dmp = fopen("./memdmp.bin", "wb+");
318           fwrite(cfg->map_data[r], 16 * SIZE_MEGA, 1, dmp);
319           fclose(dmp);
320         }
321       }
322       if (c == 's' && realtime_disassembly) {
323         do_disasm = 1;
324       }
325       if (c == 'S' && realtime_disassembly) {
326         do_disasm = 128;
327       }
328     }
329   }
330
331   goto key_loop;
332
333 key_end:
334   printf("[KBD] Keyboard thread ending\n");
335 }
336
337 void stop_cpu_emulation(uint8_t disasm_cur) {
338   M68K_END_TIMESLICE;
339   if (disasm_cur) {
340     m68k_disassemble(disasm_buf, m68k_get_reg(NULL, M68K_REG_PC), cpu_type);
341     printf("REGA: 0:$%.8X 1:$%.8X 2:$%.8X 3:$%.8X 4:$%.8X 5:$%.8X 6:$%.8X 7:$%.8X\n", m68k_get_reg(NULL, M68K_REG_A0), m68k_get_reg(NULL, M68K_REG_A1), m68k_get_reg(NULL, M68K_REG_A2), m68k_get_reg(NULL, M68K_REG_A3), \
342             m68k_get_reg(NULL, M68K_REG_A4), m68k_get_reg(NULL, M68K_REG_A5), m68k_get_reg(NULL, M68K_REG_A6), m68k_get_reg(NULL, M68K_REG_A7));
343     printf("REGD: 0:$%.8X 1:$%.8X 2:$%.8X 3:$%.8X 4:$%.8X 5:$%.8X 6:$%.8X 7:$%.8X\n", m68k_get_reg(NULL, M68K_REG_D0), m68k_get_reg(NULL, M68K_REG_D1), m68k_get_reg(NULL, M68K_REG_D2), m68k_get_reg(NULL, M68K_REG_D3), \
344             m68k_get_reg(NULL, M68K_REG_D4), m68k_get_reg(NULL, M68K_REG_D5), m68k_get_reg(NULL, M68K_REG_D6), m68k_get_reg(NULL, M68K_REG_D7));
345     printf("%.8X (%.8X)]] %s\n", m68k_get_reg(NULL, M68K_REG_PC), (m68k_get_reg(NULL, M68K_REG_PC) & 0xFFFFFF), disasm_buf);
346     realtime_disassembly = 1;
347   }
348
349   cpu_emulation_running = 0;
350   do_disasm = 0;
351 }
352
353 unsigned int ovl;
354 static volatile unsigned char maprom;
355
356 void sigint_handler(int sig_num) {
357   //if (sig_num) { }
358   //cpu_emulation_running = 0;
359
360   //return;
361   printf("Received sigint %d, exiting.\n", sig_num);
362   if (mouse_fd != -1)
363     close(mouse_fd);
364   if (mem_fd)
365     close(mem_fd);
366
367   if (cfg->platform->shutdown) {
368     cfg->platform->shutdown(cfg);
369   }
370
371   printf("IRQs triggered: %lld\n", trig_irq);
372   printf("IRQs serviced: %lld\n", serv_irq);
373
374   exit(0);
375 }
376
377 int main(int argc, char *argv[]) {
378   int g;
379   //const struct sched_param priority = {99};
380
381   if (argc > 1) {
382     irq_delay = atoi(argv[1]);
383     printf("Setting IRQ delay to %d loops (%s).\n", irq_delay, argv[1]);
384   }
385
386   // Some command line switch stuffles
387   for (g = 1; g < argc; g++) {
388     if (strcmp(argv[g], "--cpu_type") == 0 || strcmp(argv[g], "--cpu") == 0) {
389       if (g + 1 >= argc) {
390         printf("%s switch found, but no CPU type specified.\n", argv[g]);
391       } else {
392         g++;
393         cpu_type = get_m68k_cpu_type(argv[g]);
394       }
395     }
396     else if (strcmp(argv[g], "--config-file") == 0 || strcmp(argv[g], "--config") == 0) {
397       if (g + 1 >= argc) {
398         printf("%s switch found, but no config filename specified.\n", argv[g]);
399       } else {
400         g++;
401         cfg = load_config_file(argv[g]);
402       }
403     }
404     else if (strcmp(argv[g], "--keyboard-file") == 0 || strcmp(argv[g], "--kbfile") == 0) {
405       if (g + 1 >= argc) {
406         printf("%s switch found, but no keyboard device path specified.\n", argv[g]);
407       } else {
408         g++;
409         strcpy(keyboard_file, argv[g]);
410       }
411     }
412   }
413
414   if (!cfg) {
415     printf("No config file specified. Trying to load default.cfg...\n");
416     cfg = load_config_file("default.cfg");
417     if (!cfg) {
418       printf("Couldn't load default.cfg, empty emulator config will be used.\n");
419       cfg = (struct emulator_config *)calloc(1, sizeof(struct emulator_config));
420       if (!cfg) {
421         printf("Failed to allocate memory for emulator config!\n");
422         return 1;
423       }
424       memset(cfg, 0x00, sizeof(struct emulator_config));
425     }
426   }
427
428   if (cfg) {
429     if (cfg->cpu_type) cpu_type = cfg->cpu_type;
430     if (cfg->loop_cycles) loop_cycles = cfg->loop_cycles;
431
432     if (!cfg->platform)
433       cfg->platform = make_platform_config("none", "generic");
434     cfg->platform->platform_initial_setup(cfg);
435   }
436
437   if (cfg->mouse_enabled) {
438     mouse_fd = open(cfg->mouse_file, O_RDWR | O_NONBLOCK);
439     if (mouse_fd == -1) {
440       printf("Failed to open %s, can't enable mouse hook.\n", cfg->mouse_file);
441       cfg->mouse_enabled = 0;
442     } else {
443       /**
444        * *-*-*-* magic numbers! *-*-*-*
445        * great, so waaaay back in the history of the pc, the ps/2 protocol set the standard for mice
446        * and in the process, the mouse sample rate was defined as a way of putting mice into vendor-specific modes.
447        * as the ancient gpm command explains, almost everything except incredibly old mice talk the IntelliMouse
448        * protocol, which reports four bytes. by default, every mouse starts in 3-byte mode (don't report wheel or
449        * additional buttons) until imps2 magic is sent. so, command $f3 is "set sample rate", followed by a byte.
450        */
451       uint8_t mouse_init[] = { 0xf4, 0xf3, 0x64 }; // enable, then set sample rate 100
452       uint8_t imps2_init[] = { 0xf3, 0xc8, 0xf3, 0x64, 0xf3, 0x50 }; // magic sequence; set sample 200, 100, 80
453       if (write(mouse_fd, mouse_init, sizeof(mouse_init)) != -1) {
454         if (write(mouse_fd, imps2_init, sizeof(imps2_init)) == -1)
455           printf("[MOUSE] Couldn't enable scroll wheel events; is this mouse from the 1980s?\n");
456       } else
457         printf("[MOUSE] Mouse didn't respond to normal PS/2 init; have you plugged a brick in by mistake?\n");
458     }
459   }
460
461   keyboard_fd = open(keyboard_file, O_RDONLY | O_NONBLOCK);
462   if (keyboard_fd == -1) {
463     printf("Failed to open keyboard event source.\n");
464   }
465
466   InitGayle();
467
468   signal(SIGINT, sigint_handler);
469   /*setup_io();
470
471   //goto skip_everything;
472
473   // Enable 200MHz CLK output on GPIO4, adjust divider and pll source depending
474   // on pi model
475   printf("Enable 200MHz GPCLK0 on GPIO4\n");
476   gpio_enable_200mhz();
477
478   // reset cpld statemachine first
479
480   write_reg(0x01);
481   usleep(100);
482   usleep(1500);
483   write_reg(0x00);
484   usleep(100);
485
486   // reset amiga and statemachine
487   skip_everything:;
488
489   usleep(1500);
490
491   m68k_init();
492   printf("Setting CPU type to %d.\n", cpu_type);
493   m68k_set_cpu_type(cpu_type);
494   cpu_pulse_reset();
495
496   if (maprom == 1) {
497     m68k_set_reg(M68K_REG_PC, 0xF80002);
498   } else {
499     m68k_set_reg(M68K_REG_PC, 0x0);
500   }*/
501   ps_setup_protocol();
502   ps_reset_state_machine();
503   ps_pulse_reset();
504
505   usleep(1500);
506   m68k_init();
507   printf("Setting CPU type to %d.\n", cpu_type);
508   m68k_set_cpu_type(cpu_type);
509   cpu_pulse_reset();
510
511   pthread_t ipl_tid, cpu_tid, kbd_tid;
512   int err;
513   err = pthread_create(&ipl_tid, NULL, &ipl_task, NULL);
514   if (err != 0)
515     printf("[ERROR] Cannot create IPL thread: [%s]", strerror(err));
516   else {
517     pthread_setname_np(ipl_tid, "pistorm: ipl");
518     printf("IPL thread created successfully\n");
519   }
520
521   // create keyboard task
522   err = pthread_create(&kbd_tid, NULL, &keyboard_task, NULL);
523   if (err != 0)
524     printf("[ERROR] Cannot create keyboard thread: [%s]", strerror(err));
525   else {
526     pthread_setname_np(kbd_tid, "pistorm: kbd");
527     printf("[MAIN] Keyboard thread created successfully\n");
528   }
529
530   // create cpu task
531   err = pthread_create(&cpu_tid, NULL, &cpu_task, NULL);
532   if (err != 0)
533     printf("[ERROR] Cannot create CPU thread: [%s]", strerror(err));
534   else {
535     pthread_setname_np(cpu_tid, "pistorm: cpu");
536     printf("[MAIN] CPU thread created successfully\n");
537   }
538
539   // wait for cpu task to end before closing up and finishing
540   pthread_join(cpu_tid, NULL);
541   printf("[MAIN] All threads appear to have concluded; ending process\n");
542
543   if (mouse_fd != -1)
544     close(mouse_fd);
545   if (mem_fd)
546     close(mem_fd);
547
548   return 0;
549 }
550
551 void cpu_pulse_reset(void) {
552   ps_pulse_reset();
553   //write_reg(0x00);
554   // printf("Status Reg%x\n",read_reg());
555   //usleep(100000);
556   //write_reg(0x02);
557   // printf("Status Reg%x\n",read_reg());
558   if (cfg->platform->handle_reset)
559     cfg->platform->handle_reset(cfg);
560
561   m68k_write_memory_16(INTENA, 0x7FFF);
562   ovl = 1;
563   m68k_write_memory_8(0xbfe201, 0x0001);  // AMIGA OVL
564   m68k_write_memory_8(0xbfe001, 0x0001);  // AMIGA OVL high (ROM@0x0)
565
566   m68k_pulse_reset();
567 }
568
569 int cpu_irq_ack(int level) {
570   printf("cpu irq ack\n");
571   return level;
572 }
573
574 static unsigned int target = 0;
575 static uint8_t send_keypress = 0;
576
577 uint8_t cdtv_dmac_reg_idx_read();
578 void cdtv_dmac_reg_idx_write(uint8_t value);
579 uint32_t cdtv_dmac_read(uint32_t address, uint8_t type);
580 void cdtv_dmac_write(uint32_t address, uint32_t value, uint8_t type);
581
582 #define PLATFORM_CHECK_READ(a) \
583   if (address >= cfg->custom_low && address < cfg->custom_high) { \
584     unsigned int target = 0; \
585     switch(cfg->platform->id) { \
586       case PLATFORM_AMIGA: { \
587         if (address >= PISCSI_OFFSET && address < PISCSI_UPPER) { \
588           return handle_piscsi_read(address, a); \
589         } \
590         if (address >= PINET_OFFSET && address < PINET_UPPER) { \
591           return handle_pinet_read(address, a); \
592         } \
593         if (address >= PIGFX_RTG_BASE && address < PIGFX_UPPER) { \
594           return rtg_read((address & 0x0FFFFFFF), a); \
595         } \
596         if (custom_read_amiga(cfg, address, &target, a) != -1) { \
597           return target; \
598         } \
599         break; \
600       } \
601       default: \
602         break; \
603     } \
604   } \
605   if (ovl || (address >= cfg->mapped_low && address < cfg->mapped_high)) { \
606     if (handle_mapped_read(cfg, address, &target, a) != -1) \
607       return target; \
608   }
609
610 unsigned int m68k_read_memory_8(unsigned int address) {
611   PLATFORM_CHECK_READ(OP_TYPE_BYTE);
612
613   /*if (address >= 0xE90000 && address < 0xF00000) {
614     printf("BYTE read from DMAC @%.8X:", address);
615     uint32_t v = cdtv_dmac_read(address & 0xFFFF, OP_TYPE_BYTE);
616     printf("%.2X\n", v);
617     M68K_END_TIMESLICE;
618     cpu_emulation_running = 0;
619     return v;
620   }*/
621
622   /*if (m68k_get_reg(NULL, M68K_REG_PC) >= 0x080032F0 && m68k_get_reg(NULL, M68K_REG_PC) <= 0x080032F0 + 0x4000) {
623     stop_cpu_emulation(1);
624   }*/
625
626
627   if (address & 0xFF000000)
628     return 0;
629
630   unsigned char result = (unsigned int)read8((uint32_t)address);
631
632   if (mouse_hook_enabled) {
633     if (address == CIAAPRA) {
634       if (mouse_buttons & 0x01) {
635         //mouse_buttons -= 1;
636         return (unsigned int)(result ^ 0x40);
637       }
638
639       return (unsigned int)result;
640     }
641   }
642
643   if (kb_hook_enabled) {
644     if (address == CIAAICR) {
645       if (get_num_kb_queued() && (!send_keypress || send_keypress == 1)) {
646         result |= 0x08;
647         if (!send_keypress)
648           send_keypress = 1;
649       }
650       if (send_keypress == 2) {
651         //result |= 0x02;
652         send_keypress = 0;
653       }
654       return result;
655     }
656     if (address == CIAADAT) {
657       //if (send_keypress) {
658         uint8_t c = 0, t = 0;
659         pop_queued_key(&c, &t);
660         t ^= 0x01;
661         result = ((c << 1) | t) ^ 0xFF;
662         send_keypress = 2;
663         //M68K_SET_IRQ(0);
664       //}
665       return result;
666     }
667   }
668
669   return result;
670 }
671
672 unsigned int m68k_read_memory_16(unsigned int address) {
673   PLATFORM_CHECK_READ(OP_TYPE_WORD);
674
675   /*if (m68k_get_reg(NULL, M68K_REG_PC) >= 0x080032F0 && m68k_get_reg(NULL, M68K_REG_PC) <= 0x080032F0 + 0x4000) {
676     stop_cpu_emulation(1);
677   }*/
678
679   /*if (address >= 0xE90000 && address < 0xF00000) {
680     printf("WORD read from DMAC @%.8X:", address);
681     uint32_t v = cdtv_dmac_read(address & 0xFFFF, OP_TYPE_WORD);
682     printf("%.2X\n", v);
683     M68K_END_TIMESLICE;
684     cpu_emulation_running = 0;
685     return v;
686   }*/
687
688   if (mouse_hook_enabled) {
689     if (address == JOY0DAT) {
690       // Forward mouse valueses to Amyga.
691       unsigned short result = (mouse_dy << 8) | (mouse_dx);
692       return (unsigned int)result;
693     }
694     /*if (address == CIAAPRA) {
695       unsigned short result = (unsigned int)read16((uint32_t)address);
696       if (mouse_buttons & 0x01) {
697         return (unsigned int)(result | 0x40);
698       }
699       else
700           return (unsigned int)result;
701     }*/
702     if (address == POTGOR) {
703       unsigned short result = (unsigned int)read16((uint32_t)address);
704       // bit 1 rmb, bit 2 mmb
705       if (mouse_buttons & 0x06) {
706         return (unsigned int)((result ^ ((mouse_buttons & 0x02) << 9))   // move rmb to bit 10
707                             & (result ^ ((mouse_buttons & 0x04) << 6))); // move mmb to bit 8
708       }
709       return (unsigned int)(result & 0xfffd);
710     }
711   }
712
713   if (address & 0xFF000000)
714     return 0;
715
716   if (address & 0x01) {
717     return ((read8(address) << 8) | read8(address + 1));
718   }
719   return (unsigned int)read16((uint32_t)address);
720 }
721
722 unsigned int m68k_read_memory_32(unsigned int address) {
723   PLATFORM_CHECK_READ(OP_TYPE_LONGWORD);
724
725   /*if (m68k_get_reg(NULL, M68K_REG_PC) >= 0x080032F0 && m68k_get_reg(NULL, M68K_REG_PC) <= 0x080032F0 + 0x4000) {
726     stop_cpu_emulation(1);
727   }*/
728
729   /*if (address >= 0xE90000 && address < 0xF00000) {
730     printf("LONGWORD read from DMAC @%.8X:", address);
731     uint32_t v = cdtv_dmac_read(address & 0xFFFF, OP_TYPE_LONGWORD);
732     printf("%.2X\n", v);
733     M68K_END_TIMESLICE;
734     cpu_emulation_running = 0;
735     return v;
736   }*/
737
738   if (address & 0xFF000000)
739     return 0;
740
741   if (address & 0x01) {
742     uint32_t c = read8(address);
743     c |= (be16toh(read16(address+1)) << 8);
744     c |= (read8(address + 3) << 24);
745     return htobe32(c);
746   }
747   uint16_t a = read16(address);
748   uint16_t b = read16(address + 2);
749   return (a << 16) | b;
750 }
751
752 #define PLATFORM_CHECK_WRITE(a) \
753   if (address >= cfg->custom_low && address < cfg->custom_high) { \
754     switch(cfg->platform->id) { \
755       case PLATFORM_AMIGA: { \
756         if (address >= PISCSI_OFFSET && address < PISCSI_UPPER) { \
757           handle_piscsi_write(address, value, a); \
758         } \
759         if (address >= PINET_OFFSET && address < PINET_UPPER) { \
760           handle_pinet_write(address, value, a); \
761         } \
762         if (address >= PIGFX_RTG_BASE && address < PIGFX_UPPER) { \
763           rtg_write((address & 0x0FFFFFFF), value, a); \
764           return; \
765         } \
766         if (custom_write_amiga(cfg, address, value, a) != -1) { \
767           return; \
768         } \
769         break; \
770       } \
771       default: \
772         break; \
773     } \
774   } \
775   if (address >= cfg->mapped_low && address < cfg->mapped_high) { \
776     if (handle_mapped_write(cfg, address, value, a) != -1) \
777       return; \
778   }
779
780 void m68k_write_memory_8(unsigned int address, unsigned int value) {
781   PLATFORM_CHECK_WRITE(OP_TYPE_BYTE);
782
783   /*if (address >= 0xE90000 && address < 0xF00000) {
784     printf("BYTE write to DMAC @%.8X: %.2X\n", address, value);
785     cdtv_dmac_write(address & 0xFFFF, value, OP_TYPE_BYTE);
786     M68K_END_TIMESLICE;
787     cpu_emulation_running = 0;
788     return;
789   }*/
790
791   if (address == 0xbfe001) {
792     if (ovl != (value & (1 << 0))) {
793       ovl = (value & (1 << 0));
794       printf("OVL:%x\n", ovl);
795     }
796   }
797
798   if (address & 0xFF000000)
799     return;
800
801   write8((uint32_t)address, value);
802   return;
803 }
804
805 void m68k_write_memory_16(unsigned int address, unsigned int value) {
806   PLATFORM_CHECK_WRITE(OP_TYPE_WORD);
807
808   /*if (address >= 0xE90000 && address < 0xF00000) {
809     printf("WORD write to DMAC @%.8X: %.4X\n", address, value);
810     cdtv_dmac_write(address & 0xFFFF, value, OP_TYPE_WORD);
811     M68K_END_TIMESLICE;
812     cpu_emulation_running = 0;
813     return;
814   }*/
815
816   if (address == 0xDFF030) {
817     char *serdat = (char *)&value;
818     // SERDAT word. see amiga dev docs appendix a; upper byte is control codes, and bit 0 is always 1.
819     // ignore this upper byte as it's not viewable data, only display lower byte.
820     printf("%c", serdat[0]);
821   }
822   if (address == 0xDFF09A) {
823     if (!(value & 0x8000)) {
824       if (value & 0x04) {
825         int2_enabled = 0;
826       }
827     }
828     else if (value & 0x04) {
829       int2_enabled = 1;
830     }
831   }
832
833   if (address & 0xFF000000)
834     return;
835
836   if (address & 0x01)
837     printf("Unaligned WORD write!\n");
838
839   write16((uint32_t)address, value);
840   return;
841 }
842
843 void m68k_write_memory_32(unsigned int address, unsigned int value) {
844   PLATFORM_CHECK_WRITE(OP_TYPE_LONGWORD);
845
846   /*if (address >= 0xE90000 && address < 0xF00000) {
847     printf("LONGWORD write to DMAC @%.8X: %.8X\n", address, value);
848     cdtv_dmac_write(address & 0xFFFF, value, OP_TYPE_LONGWORD);
849     M68K_END_TIMESLICE;
850     cpu_emulation_running = 0;
851     return;
852   }*/
853
854   if (address & 0xFF000000)
855     return;
856
857   if (address & 0x01)
858     printf("Unaligned LONGWORD write!\n");
859
860   write16(address, value >> 16);
861   write16(address + 2, value);
862   return;
863 }