# pistorm
+
+Simple quickstart
+
+
+
+* Download Raspberry OS from https://www.raspberrypi.org/software/operating-systems/ , the Lite version is sufficent
+* Write the Image to a SD Card (8GB sized is plenty, for larger HDD Images pick a bigger one)
+* Install the pistorm adapter inplace of the orignal CPU into the Amiga500. Make sure the pistorm sits flush and correct in the Amiga.
+ The correct orientation on the pistorm is the USB port facing towards you and the HDMI port is facing to the right
+ **If the pistorm should not stay in place properly (jumping out of the CPU socket) then bend the pins of the pistorm very very very slightly
+ outwards. Double check that all is properly in place and no pins are bend.
+* Connect a HDMI Display and a USB Keyboard to the pistorm. Using a USB Hub is possible, connect the Amiga to the PSU and PAL Monitor
+* Insert the SD into the Raspberry, Power on the Amiga now. You should see a Rainbow colored screen on the HDMI Monitor and the pistrom booting
+
+
+* As soon as the boot process is finished (on the first run it reboots automatically after resizing the filesystems to your SD) you should be greeted
+ with the login prompt
+* Log in as user : pi , password : raspberry (The keyboard is set to US Layout on first boot!)
+* run : sudo raspi-config
+* Setup your preferences like keyboard layout,language etc.
+* Setup your Wifi credentials
+* Enable SSH at boot time
+* Exit raspi-config
+
+ You can now reach the pistorm over SSH , look into you router webpage to find the IP of the pistorm or run : ifconfig
+
+run : sudo apt-get install git
+run : cd pistorm
+run : make
+
+to start the pistorm emulator
+
+run : ./run.sh
+
+to exit emulation
+ctrl+c
+
+If you want to use the minimal hdd image you need to unpack it :
+run : tar xvfz hd0.tar.gz
+
+**Currently the emulation is a bit buggy on IDE Interrupts, so it takes ages to boot from the emulated HDD. This will be fixed soon :)
+
+
+
+
projects / pistorm / commitdiff