remove library from bcachefs-tools Rust package

[bcachefs-tools-debian] / c_src / raid / raid.c

/*
 * Copyright (C) 2013 Andrea Mazzoleni
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include "internal.h"
#include "gf.h"

/*
 * This is a RAID implementation working in the Galois Field GF(2^8) with
 * the primitive polynomial x^8 + x^4 + x^3 + x^2 + 1 (285 decimal), and
 * supporting up to six parity levels.
 *
 * For RAID5 and RAID6 it works as as described in the H. Peter Anvin's
 * paper "The mathematics of RAID-6" [1]. Please refer to this paper for a
 * complete explanation.
 *
 * To support triple parity, it was first evaluated and then dropped, an
 * extension of the same approach, with additional parity coefficients set
 * as powers of 2^-1, with equations:
 *
 * P = sum(Di)
 * Q = sum(2^i * Di)
 * R = sum(2^-i * Di) with 0<=i<N
 *
 * This approach works well for triple parity and it's very efficient,
 * because we can implement very fast parallel multiplications and
 * divisions by 2 in GF(2^8).
 *
 * It's also similar at the approach used by ZFS RAIDZ3, with the
 * difference that ZFS uses powers of 4 instead of 2^-1.
 *
 * Unfortunately it doesn't work beyond triple parity, because whatever
 * value we choose to generate the power coefficients to compute other
 * parities, the resulting equations are not solvable for some
 * combinations of missing disks.
 *
 * This is expected, because the Vandermonde matrix used to compute the
 * parity has no guarantee to have all submatrices not singular
 * [2, Chap 11, Problem 7] and this is a requirement to have
 * a MDS (Maximum Distance Separable) code [2, Chap 11, Theorem 8].
 *
 * To overcome this limitation, we use a Cauchy matrix [3][4] to compute
 * the parity. A Cauchy matrix has the property to have all the square
 * submatrices not singular, resulting in always solvable equations,
 * for any combination of missing disks.
 *
 * The problem of this approach is that it requires the use of
 * generic multiplications, and not only by 2 or 2^-1, potentially
 * affecting badly the performance.
 *
 * Hopefully there is a method to implement parallel multiplications
 * using SSSE3 or AVX2 instructions [1][5]. Method competitive with the
 * computation of triple parity using power coefficients.
 *
 * Another important property of the Cauchy matrix is that we can setup
 * the first two rows with coeffients equal at the RAID5 and RAID6 approach
 * decribed, resulting in a compatible extension, and requiring SSSE3
 * or AVX2 instructions only if triple parity or beyond is used.
 *
 * The matrix is also adjusted, multipling each row by a constant factor
 * to make the first column of all 1, to optimize the computation for
 * the first disk.
 *
 * This results in the matrix A[row,col] defined as:
 *
 * 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01...
 * 01 02 04 08 10 20 40 80 1d 3a 74 e8 cd 87 13 26 4c 98 2d 5a b4 75...
 * 01 f5 d2 c4 9a 71 f1 7f fc 87 c1 c6 19 2f 40 55 3d ba 53 04 9c 61...
 * 01 bb a6 d7 c7 07 ce 82 4a 2f a5 9b b6 60 f1 ad e7 f4 06 d2 df 2e...
 * 01 97 7f 9c 7c 18 bd a2 58 1a da 74 70 a3 e5 47 29 07 f5 80 23 e9...
 * 01 2b 3f cf 73 2c d6 ed cb 74 15 78 8a c1 17 c9 89 68 21 ab 76 3b...
 *
 * This matrix supports 6 level of parity, one for each row, for up to 251
 * data disks, one for each column, with all the 377,342,351,231 square
 * submatrices not singular, verified also with brute-force.
 *
 * This matrix can be extended to support any number of parities, just
 * adding additional rows, and removing one column for each new row.
 * (see mktables.c for more details in how the matrix is generated)
 *
 * In details, parity is computed as:
 *
 * P = sum(Di)
 * Q = sum(2^i *  Di)
 * R = sum(A[2,i] * Di)
 * S = sum(A[3,i] * Di)
 * T = sum(A[4,i] * Di)
 * U = sum(A[5,i] * Di) with 0<=i<N
 *
 * To recover from a failure of six disks at indexes x,y,z,h,v,w,
 * with 0<=x<y<z<h<v<w<N, we compute the parity of the available N-6
 * disks as:
 *
 * Pa = sum(Di)
 * Qa = sum(2^i * Di)
 * Ra = sum(A[2,i] * Di)
 * Sa = sum(A[3,i] * Di)
 * Ta = sum(A[4,i] * Di)
 * Ua = sum(A[5,i] * Di) with 0<=i<N,i!=x,i!=y,i!=z,i!=h,i!=v,i!=w.
 *
 * And if we define:
 *
 * Pd = Pa + P
 * Qd = Qa + Q
 * Rd = Ra + R
 * Sd = Sa + S
 * Td = Ta + T
 * Ud = Ua + U
 *
 * we can sum these two sets of equations, obtaining:
 *
 * Pd =          Dx +          Dy +          Dz +          Dh +          Dv +          Dw
 * Qd =    2^x * Dx +    2^y * Dy +    2^z * Dz +    2^h * Dh +    2^v * Dv +    2^w * Dw
 * Rd = A[2,x] * Dx + A[2,y] * Dy + A[2,z] * Dz + A[2,h] * Dh + A[2,v] * Dv + A[2,w] * Dw
 * Sd = A[3,x] * Dx + A[3,y] * Dy + A[3,z] * Dz + A[3,h] * Dh + A[3,v] * Dv + A[3,w] * Dw
 * Td = A[4,x] * Dx + A[4,y] * Dy + A[4,z] * Dz + A[4,h] * Dh + A[4,v] * Dv + A[4,w] * Dw
 * Ud = A[5,x] * Dx + A[5,y] * Dy + A[5,z] * Dz + A[5,h] * Dh + A[5,v] * Dv + A[5,w] * Dw
 *
 * A linear system always solvable because the coefficients matrix is
 * always not singular due the properties of the matrix A[].
 *
 * Resulting speed in x64, with 8 data disks, using a stripe of 256 KiB,
 * for a Core i5-4670K Haswell Quad-Core 3.4GHz is:
 *
 *             int8   int32   int64    sse2   ssse3    avx2
 *   gen1             13339   25438   45438           50588
 *   gen2              4115    6514   21840           32201
 *   gen3       814                           10154   18613
 *   gen4       620                            7569   14229
 *   gen5       496                            5149   10051
 *   gen6       413                            4239    8190
 *
 * Values are in MiB/s of data processed by a single thread, not counting
 * generated parity.
 *
 * You can replicate these results in your machine using the
 * "raid/test/speedtest.c" program.
 *
 * For comparison, the triple parity computation using the power
 * coeffients "1,2,2^-1" is only a little faster than the one based on
 * the Cauchy matrix if SSSE3 or AVX2 is present.
 *
 *             int8   int32   int64    sse2   ssse3    avx2
 *   genz              2337    2874   10920           18944
 *
 * In conclusion, the use of power coefficients, and specifically powers
 * of 1,2,2^-1, is the best option to implement triple parity in CPUs
 * without SSSE3 and AVX2.
 * But if a modern CPU with SSSE3 or AVX2 is available, the Cauchy
 * matrix is the best option because it provides a fast and general
 * approach working for any number of parities.
 *
 * References:
 * [1] Anvin, "The mathematics of RAID-6", 2004
 * [2] MacWilliams, Sloane, "The Theory of Error-Correcting Codes", 1977
 * [3] Blomer, "An XOR-Based Erasure-Resilient Coding Scheme", 1995
 * [4] Roth, "Introduction to Coding Theory", 2006
 * [5] Plank, "Screaming Fast Galois Field Arithmetic Using Intel SIMD Instructions", 2013
 */

/**
 * Generator matrix currently used.
 */
const uint8_t (*raid_gfgen)[256];

void raid_mode(int mode)
{
        if (mode == RAID_MODE_VANDERMONDE) {
                raid_gen_ptr[2] = raid_genz_ptr;
                raid_gfgen = gfvandermonde;
        } else {
                raid_gen_ptr[2] = raid_gen3_ptr;
                raid_gfgen = gfcauchy;
        }
}

/**
 * Buffer filled with 0 used in recovering.
 */
static void *raid_zero_block;

void raid_zero(void *zero)
{
        raid_zero_block = zero;
}

/*
 * Forwarders for parity computation.
 *
 * These functions compute the parity blocks from the provided data.
 *
 * The number of parities to compute is implicit in the position in the
 * forwarder vector. Position at index #i, computes (#i+1) parities.
 *
 * All these functions give the guarantee that parities are written
 * in order. First parity P, then parity Q, and so on.
 * This allows to specify the same memory buffer for multiple parities
 * knowning that you'll get the latest written one.
 * This characteristic is used by the raid_delta_gen() function to
 * avoid to damage unused parities in recovering.
 *
 * @nd Number of data blocks
 * @size Size of the blocks pointed by @v. It must be a multipler of 64.
 * @v Vector of pointers to the blocks of data and parity.
 *   It has (@nd + #parities) elements. The starting elements are the blocks
 *   for data, following with the parity blocks.
 *   Each block has @size bytes.
 */
void (*raid_gen_ptr[RAID_PARITY_MAX])(int nd, size_t size, void **vv);
void (*raid_gen3_ptr)(int nd, size_t size, void **vv);
void (*raid_genz_ptr)(int nd, size_t size, void **vv);

void raid_gen(int nd, int np, size_t size, void **v)
{
        /* enforce limit on size */
        BUG_ON(size % 64 != 0);

        /* enforce limit on number of failures */
        BUG_ON(np < 1);
        BUG_ON(np > RAID_PARITY_MAX);

        raid_gen_ptr[np - 1](nd, size, v);
}

/**
 * Inverts the square matrix M of size nxn into V.
 *
 * This is not a general matrix inversion because we assume the matrix M
 * to have all the square submatrix not singular.
 * We use Gauss elimination to invert.
 *
 * @M Matrix to invert with @n rows and @n columns.
 * @V Destination matrix where the result is put.
 * @n Number of rows and columns of the matrix.
 */
void raid_invert(uint8_t *M, uint8_t *V, int n)
{
        int i, j, k;

        /* set the identity matrix in V */
        for (i = 0; i < n; ++i)
                for (j = 0; j < n; ++j)
                        V[i * n + j] = i == j;

        /* for each element in the diagonal */
        for (k = 0; k < n; ++k) {
                uint8_t f;

                /* the diagonal element cannot be 0 because */
                /* we are inverting matrices with all the square */
                /* submatrices not singular */
                BUG_ON(M[k * n + k] == 0);

                /* make the diagonal element to be 1 */
                f = inv(M[k * n + k]);
                for (j = 0; j < n; ++j) {
                        M[k * n + j] = mul(f, M[k * n + j]);
                        V[k * n + j] = mul(f, V[k * n + j]);
                }

                /* make all the elements over and under the diagonal */
                /* to be zero */
                for (i = 0; i < n; ++i) {
                        if (i == k)
                                continue;
                        f = M[i * n + k];
                        for (j = 0; j < n; ++j) {
                                M[i * n + j] ^= mul(f, M[k * n + j]);
                                V[i * n + j] ^= mul(f, V[k * n + j]);
                        }
                }
        }
}

/**
 * Computes the parity without the missing data blocks
 * and store it in the buffers of such data blocks.
 *
 * This is the parity expressed as Pa,Qa,Ra,Sa,Ta,Ua in the equations.
 */
void raid_delta_gen(int nr, int *id, int *ip, int nd, size_t size, void **v)
{
        void *p[RAID_PARITY_MAX];
        void *pa[RAID_PARITY_MAX];
        int i, j;
        int np;
        void *latest;

        /* total number of parities we are going to process */
        /* they are both the used and the unused ones */
        np = ip[nr - 1] + 1;

        /* latest missing data block */
        latest = v[id[nr - 1]];

        /* setup pointers for delta computation */
        for (i = 0, j = 0; i < np; ++i) {
                /* keep a copy of the original parity vector */
                p[i] = v[nd + i];

                if (ip[j] == i) {
                        /*
                         * Set used parities to point to the missing
                         * data blocks.
                         *
                         * The related data blocks are instead set
                         * to point to the "zero" buffer.
                         */

                        /* the latest parity to use ends the for loop and */
                        /* then it cannot happen to process more of them */
                        BUG_ON(j >= nr);

                        /* buffer for missing data blocks */
                        pa[j] = v[id[j]];

                        /* set at zero the missing data blocks */
                        v[id[j]] = raid_zero_block;

                        /* compute the parity over the missing data blocks */
                        v[nd + i] = pa[j];

                        /* check for the next used entry */
                        ++j;
                } else {
                        /*
                         * Unused parities are going to be rewritten with
                         * not significative data, becase we don't have
                         * functions able to compute only a subset of
                         * parities.
                         *
                         * To avoid this, we reuse parity buffers,
                         * assuming that all the parity functions write
                         * parities in order.
                         *
                         * We assign the unused parity block to the same
                         * block of the latest used parity that we know it
                         * will be written.
                         *
                         * This means that this block will be written
                         * multiple times and only the latest write will
                         * contain the correct data.
                         */
                        v[nd + i] = latest;
                }
        }

        /* all the parities have to be processed */
        BUG_ON(j != nr);

        /* recompute the parity, note that np may be smaller than the */
        /* total number of parities available */
        raid_gen(nd, np, size, v);

        /* restore data buffers as before */
        for (j = 0; j < nr; ++j)
                v[id[j]] = pa[j];

        /* restore parity buffers as before */
        for (i = 0; i < np; ++i)
                v[nd + i] = p[i];
}

/**
 * Recover failure of one data block for PAR1.
 *
 * Starting from the equation:
 *
 * Pd = Dx
 *
 * and solving we get:
 *
 * Dx = Pd
 */
void raid_rec1of1(int *id, int nd, size_t size, void **v)
{
        void *p;
        void *pa;

        /* for PAR1 we can directly compute the missing block */
        /* and we don't need to use the zero buffer */
        p = v[nd];
        pa = v[id[0]];

        /* use the parity as missing data block */
        v[id[0]] = p;

        /* compute the parity over the missing data block */
        v[nd] = pa;

        /* compute */
        raid_gen(nd, 1, size, v);

        /* restore as before */
        v[id[0]] = pa;
        v[nd] = p;
}

/**
 * Recover failure of two data blocks for PAR2.
 *
 * Starting from the equations:
 *
 * Pd = Dx + Dy
 * Qd = 2^id[0] * Dx + 2^id[1] * Dy
 *
 * and solving we get:
 *
 *               1                     2^(-id[0])
 * Dy = ------------------- * Pd + ------------------- * Qd
 *      2^(id[1]-id[0]) + 1        2^(id[1]-id[0]) + 1
 *
 * Dx = Dy + Pd
 *
 * with conditions:
 *
 * 2^id[0] != 0
 * 2^(id[1]-id[0]) + 1 != 0
 *
 * That are always satisfied for any 0<=id[0]<id[1]<255.
 */
void raid_rec2of2_int8(int *id, int *ip, int nd, size_t size, void **vv)
{
        uint8_t **v = (uint8_t **)vv;
        size_t i;
        uint8_t *p;
        uint8_t *pa;
        uint8_t *q;
        uint8_t *qa;
        const uint8_t *T[2];

        /* get multiplication tables */
        T[0] = table(inv(pow2(id[1] - id[0]) ^ 1));
        T[1] = table(inv(pow2(id[0]) ^ pow2(id[1])));

        /* compute delta parity */
        raid_delta_gen(2, id, ip, nd, size, vv);

        p = v[nd];
        q = v[nd + 1];
        pa = v[id[0]];
        qa = v[id[1]];

        for (i = 0; i < size; ++i) {
                /* delta */
                uint8_t Pd = p[i] ^ pa[i];
                uint8_t Qd = q[i] ^ qa[i];

                /* reconstruct */
                uint8_t Dy = T[0][Pd] ^ T[1][Qd];
                uint8_t Dx = Pd ^ Dy;

                /* set */
                pa[i] = Dx;
                qa[i] = Dy;
        }
}

/*
 * Forwarders for data recovery.
 *
 * These functions recover data blocks using the specified parity
 * to recompute the missing data.
 *
 * Note that the format of vectors @id/@ip is different than raid_rec().
 * For example, in the vector @ip the first parity is represented with the
 * value 0 and not @nd.
 *
 * @nr Number of failed data blocks to recover.
 * @id[] Vector of @nr indexes of the data blocks to recover.
 *   The indexes start from 0. They must be in order.
 * @ip[] Vector of @nr indexes of the parity blocks to use in the recovering.
 *   The indexes start from 0. They must be in order.
 * @nd Number of data blocks.
 * @np Number of parity blocks.
 * @size Size of the blocks pointed by @v. It must be a multipler of 64.
 * @v Vector of pointers to the blocks of data and parity.
 *   It has (@nd + @np) elements. The starting elements are the blocks
 *   for data, following with the parity blocks.
 *   Each block has @size bytes.
 */
void (*raid_rec_ptr[RAID_PARITY_MAX])(
        int nr, int *id, int *ip, int nd, size_t size, void **vv);

void raid_rec(int nr, int *ir, int nd, int np, size_t size, void **v)
{
        int nrd; /* number of data blocks to recover */
        int nrp; /* number of parity blocks to recover */

        /* enforce limit on size */
        BUG_ON(size % 64 != 0);

        /* enforce limit on number of failures */
        BUG_ON(nr > np);
        BUG_ON(np > RAID_PARITY_MAX);

        /* enforce order in index vector */
        BUG_ON(nr >= 2 && ir[0] >= ir[1]);
        BUG_ON(nr >= 3 && ir[1] >= ir[2]);
        BUG_ON(nr >= 4 && ir[2] >= ir[3]);
        BUG_ON(nr >= 5 && ir[3] >= ir[4]);
        BUG_ON(nr >= 6 && ir[4] >= ir[5]);

        /* enforce limit on index vector */
        BUG_ON(nr > 0 && ir[nr-1] >= nd + np);

        /* count the number of data blocks to recover */
        nrd = 0;
        while (nrd < nr && ir[nrd] < nd)
                ++nrd;

        /* all the remaining are parity */
        nrp = nr - nrd;

        /* enforce limit on number of failures */
        BUG_ON(nrd > nd);
        BUG_ON(nrp > np);

        /* if failed data is present */
        if (nrd != 0) {
                int ip[RAID_PARITY_MAX];
                int i, j, k;

                /* setup the vector of parities to use */
                for (i = 0, j = 0, k = 0; i < np; ++i) {
                        if (j < nrp && ir[nrd + j] == nd + i) {
                                /* this parity has to be recovered */
                                ++j;
                        } else {
                                /* this parity is used for recovering */
                                ip[k] = i;
                                ++k;
                        }
                }

                /* recover the nrd data blocks specified in ir[], */
                /* using the first nrd parity in ip[] for recovering */
                raid_rec_ptr[nrd - 1](nrd, ir, ip, nd, size, v);
        }

        /* recompute all the parities up to the last bad one */
        if (nrp != 0)
                raid_gen(nd, ir[nr - 1] - nd + 1, size, v);
}

void raid_data(int nr, int *id, int *ip, int nd, size_t size, void **v)
{
        /* enforce limit on size */
        BUG_ON(size % 64 != 0);

        /* enforce limit on number of failures */
        BUG_ON(nr > nd);
        BUG_ON(nr > RAID_PARITY_MAX);

        /* enforce order in index vector for data */
        BUG_ON(nr >= 2 && id[0] >= id[1]);
        BUG_ON(nr >= 3 && id[1] >= id[2]);
        BUG_ON(nr >= 4 && id[2] >= id[3]);
        BUG_ON(nr >= 5 && id[3] >= id[4]);
        BUG_ON(nr >= 6 && id[4] >= id[5]);

        /* enforce limit on index vector for data */
        BUG_ON(nr > 0 && id[nr-1] >= nd);

        /* enforce order in index vector for parity */
        BUG_ON(nr >= 2 && ip[0] >= ip[1]);
        BUG_ON(nr >= 3 && ip[1] >= ip[2]);
        BUG_ON(nr >= 4 && ip[2] >= ip[3]);
        BUG_ON(nr >= 5 && ip[3] >= ip[4]);
        BUG_ON(nr >= 6 && ip[4] >= ip[5]);

        /* if failed data is present */
        if (nr != 0)
                raid_rec_ptr[nr - 1](nr, id, ip, nd, size, v);
}