1 # Stockfish, a UCI chess playing engine derived from Glaurung 2.1
2 # Copyright (C) 2004-2008 Tord Romstad (Glaurung author)
3 # Copyright (C) 2008-2015 Marco Costalba, Joona Kiiski, Tord Romstad
5 # Stockfish is free software: you can redistribute it and/or modify
6 # it under the terms of the GNU General Public License as published by
7 # the Free Software Foundation, either version 3 of the License, or
8 # (at your option) any later version.
10 # Stockfish is distributed in the hope that it will be useful,
11 # but WITHOUT ANY WARRANTY; without even the implied warranty of
12 # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 # GNU General Public License for more details.
15 # You should have received a copy of the GNU General Public License
16 # along with this program. If not, see <http://www.gnu.org/licenses/>.
19 ### ==========================================================================
20 ### Section 1. General Configuration
21 ### ==========================================================================
23 ### Establish the operating system name
24 UNAME = $(shell uname)
29 ### Installation dir definitions
31 BINDIR = $(PREFIX)/bin
33 ### Built-in benchmark for pgo-builds
34 PGOBENCH = ./$(EXE) bench 16 1 1000 default time
37 OBJS = benchmark.o bitbase.o bitboard.o endgame.o evaluate.o main.o \
38 material.o misc.o movegen.o movepick.o pawns.o position.o psqt.o \
39 search.o thread.o timeman.o tt.o uci.o ucioption.o syzygy/tbprobe.o
41 ### ==========================================================================
42 ### Section 2. High-level Configuration
43 ### ==========================================================================
45 # flag --- Comp switch --- Description
46 # ----------------------------------------------------------------------------
48 # debug = yes/no --- -DNDEBUG --- Enable/Disable debug mode
49 # optimize = yes/no --- (-O3/-fast etc.) --- Enable/Disable optimizations
50 # arch = (name) --- (-arch) --- Target architecture
51 # bits = 64/32 --- -DIS_64BIT --- 64-/32-bit operating system
52 # prefetch = yes/no --- -DUSE_PREFETCH --- Use prefetch x86 asm-instruction
53 # bsfq = yes/no --- -DUSE_BSFQ --- Use bsfq x86_64 asm-instruction (only
54 # with GCC and ICC 64-bit)
55 # popcnt = yes/no --- -DUSE_POPCNT --- Use popcnt x86_64 asm-instruction
56 # sse = yes/no --- -msse --- Use Intel Streaming SIMD Extensions
57 # pext = yes/no --- -DUSE_PEXT --- Use pext x86_64 asm-instruction
59 # Note that Makefile is space sensitive, so when adding new architectures
60 # or modifying existing flags, you have to make sure there are no extra spaces
61 # at the end of the line for flag values.
63 ### 2.1. General and architecture defaults
73 ### 2.2 Architecture specific
75 ifeq ($(ARCH),general-32)
79 ifeq ($(ARCH),x86-32-old)
89 ifeq ($(ARCH),general-64)
102 ifeq ($(ARCH),x86-64-modern)
111 ifeq ($(ARCH),x86-64-bmi2)
127 ifeq ($(ARCH),ppc-32)
131 ifeq ($(ARCH),ppc-64)
137 ### ==========================================================================
138 ### Section 3. Low-level configuration
139 ### ==========================================================================
141 ### 3.1 Selecting compiler (default = gcc)
143 CXXFLAGS += -Wall -Wcast-qual -fno-exceptions -fno-rtti -std=c++11 $(EXTRACXXFLAGS)
144 DEPENDFLAGS += -std=c++11
145 LDFLAGS += $(EXTRALDFLAGS)
154 CXXFLAGS += -pedantic -Wextra -Wshadow
155 ifneq ($(UNAME),Darwin)
156 LDFLAGS += -Wl,--no-as-needed
162 ifeq ($(UNAME),Linux)
163 CXX=x86_64-w64-mingw32-g++-posix
167 CXXFLAGS += -Wextra -Wshadow
174 CXXFLAGS += -diag-disable 1476,10120 -Wcheck -Wabi -Wdeprecated -strict-ansi
180 CXXFLAGS += -pedantic -Wextra -Wshadow
181 ifeq ($(UNAME),Darwin)
182 CXXFLAGS += -std=c++0x -stdlib=libc++
183 DEPENDFLAGS += -std=c++0x -stdlib=libc++
188 profile_prepare = icc-profile-prepare
189 profile_make = icc-profile-make
190 profile_use = icc-profile-use
191 profile_clean = icc-profile-clean
193 profile_prepare = gcc-profile-prepare
194 profile_make = gcc-profile-make
195 profile_use = gcc-profile-use
196 profile_clean = gcc-profile-clean
199 ifeq ($(UNAME),Darwin)
200 CXXFLAGS += -arch $(arch) -mmacosx-version-min=10.9
201 LDFLAGS += -arch $(arch) -mmacosx-version-min=10.9
204 ### Travis CI script uses COMPILER to overwrite CXX
209 ### On mingw use Windows threads, otherwise POSIX
210 ifneq ($(comp),mingw)
211 # On Android Bionic's C library comes with its own pthread implementation bundled in
212 ifneq ($(arch),armv7)
213 # Haiku has pthreads in its libroot, so only link it in on other platforms
214 ifneq ($(UNAME),Haiku)
228 ifeq ($(optimize),yes)
233 ifeq ($(UNAME),Darwin)
235 CXXFLAGS += -mdynamic-no-pic
237 ifeq ($(arch),x86_64)
238 CXXFLAGS += -mdynamic-no-pic
243 CXXFLAGS += -fno-gcse -mthumb -march=armv7-a -mfloat-abi=softfp
252 ifeq ($(UNAME),Darwin)
253 CXXFLAGS += -fast -mdynamic-no-pic
262 ifeq ($(UNAME),Darwin)
265 LDFLAGS += $(CXXFLAGS)
268 CXXFLAGS += -mdynamic-no-pic
270 ifeq ($(arch),x86_64)
271 CXXFLAGS += -mdynamic-no-pic
279 CXXFLAGS += -DIS_64BIT
283 ifeq ($(prefetch),yes)
289 CXXFLAGS += -DNO_PREFETCH
294 CXXFLAGS += -DUSE_BSFQ
300 CXXFLAGS += -msse3 -DUSE_POPCNT
302 CXXFLAGS += -msse3 -mpopcnt -DUSE_POPCNT
308 CXXFLAGS += -DUSE_PEXT
309 ifeq ($(comp),$(filter $(comp),gcc clang mingw))
310 CXXFLAGS += -mbmi -mbmi2
314 ### 3.11 Link Time Optimization, it works since gcc 4.5 but not on mingw under windows.
315 ### This is a mix of compile and link time options because the lto link phase
316 ### needs access to the optimization flags.
318 ifeq ($(optimize),yes)
321 LDFLAGS += $(CXXFLAGS)
326 ifeq ($(UNAME),Linux)
328 ifeq ($(optimize),yes)
331 LDFLAGS += $(CXXFLAGS)
337 ### 3.12 Android 5 can only run position independent executables. Note that this
338 ### breaks Android 4.0 and earlier.
341 LDFLAGS += -fPIE -pie
345 ### ==========================================================================
346 ### Section 4. Public targets
347 ### ==========================================================================
351 @echo "To compile stockfish, type: "
353 @echo "make target ARCH=arch [COMP=comp]"
355 @echo "Supported targets:"
357 @echo "build > Standard build"
358 @echo "profile-build > PGO build"
359 @echo "strip > Strip executable"
360 @echo "install > Install executable"
361 @echo "clean > Clean up"
363 @echo "Supported archs:"
365 @echo "x86-64 > x86 64-bit"
366 @echo "x86-64-modern > x86 64-bit with popcnt support"
367 @echo "x86-64-bmi2 > x86 64-bit with pext support"
368 @echo "x86-32 > x86 32-bit with SSE support"
369 @echo "x86-32-old > x86 32-bit fall back for old hardware"
370 @echo "ppc-64 > PPC 64-bit"
371 @echo "ppc-32 > PPC 32-bit"
372 @echo "armv7 > ARMv7 32-bit"
373 @echo "general-64 > unspecified 64-bit"
374 @echo "general-32 > unspecified 32-bit"
376 @echo "Supported compilers:"
378 @echo "gcc > Gnu compiler (default)"
379 @echo "mingw > Gnu compiler with MinGW under Windows"
380 @echo "clang > LLVM Clang compiler"
381 @echo "icc > Intel compiler"
383 @echo "Examples. If you don't know what to do, you likely want to run: "
385 @echo "make build ARCH=x86-64 (This is for 64-bit systems)"
386 @echo "make build ARCH=x86-32 (This is for 32-bit systems)"
389 .PHONY: build profile-build
391 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) config-sanity
392 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) all
395 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) config-sanity
397 @echo "Step 0/4. Preparing for profile build."
398 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_prepare)
400 @echo "Step 1/4. Building executable for benchmark ..."
401 @touch *.cpp *.h syzygy/*.cpp syzygy/*.h
402 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_make)
404 @echo "Step 2/4. Running benchmark for pgo-build ..."
405 $(PGOBENCH) > /dev/null
407 @echo "Step 3/4. Building final executable ..."
408 @touch *.cpp *.h syzygy/*.cpp syzygy/*.h
409 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_use)
411 @echo "Step 4/4. Deleting profile data ..."
412 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) $(profile_clean)
418 -mkdir -p -m 755 $(BINDIR)
420 -strip $(BINDIR)/$(EXE)
423 $(RM) $(EXE) $(EXE).exe *.o .depend *~ core bench.txt *.gcda ./syzygy/*.o ./syzygy/*.gcda
428 ### ==========================================================================
429 ### Section 5. Private targets
430 ### ==========================================================================
437 @echo "debug: '$(debug)'"
438 @echo "optimize: '$(optimize)'"
439 @echo "arch: '$(arch)'"
440 @echo "bits: '$(bits)'"
441 @echo "prefetch: '$(prefetch)'"
442 @echo "bsfq: '$(bsfq)'"
443 @echo "popcnt: '$(popcnt)'"
444 @echo "sse: '$(sse)'"
445 @echo "pext: '$(pext)'"
449 @echo "CXXFLAGS: $(CXXFLAGS)"
450 @echo "LDFLAGS: $(LDFLAGS)"
452 @echo "Testing config sanity. If this fails, try 'make help' ..."
454 @test "$(debug)" = "yes" || test "$(debug)" = "no"
455 @test "$(optimize)" = "yes" || test "$(optimize)" = "no"
456 @test "$(arch)" = "any" || test "$(arch)" = "x86_64" || test "$(arch)" = "i386" || \
457 test "$(arch)" = "ppc64" || test "$(arch)" = "ppc" || test "$(arch)" = "armv7"
458 @test "$(bits)" = "32" || test "$(bits)" = "64"
459 @test "$(prefetch)" = "yes" || test "$(prefetch)" = "no"
460 @test "$(bsfq)" = "yes" || test "$(bsfq)" = "no"
461 @test "$(popcnt)" = "yes" || test "$(popcnt)" = "no"
462 @test "$(sse)" = "yes" || test "$(sse)" = "no"
463 @test "$(pext)" = "yes" || test "$(pext)" = "no"
464 @test "$(comp)" = "gcc" || test "$(comp)" = "icc" || test "$(comp)" = "mingw" || test "$(comp)" = "clang"
467 $(CXX) -o $@ $(OBJS) $(LDFLAGS)
470 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) gcc-profile-clean
473 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
474 EXTRACXXFLAGS='-fprofile-generate' \
475 EXTRALDFLAGS='-lgcov' \
479 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
480 EXTRACXXFLAGS='-fprofile-use -fno-peel-loops -fno-tracer' \
481 EXTRALDFLAGS='-lgcov' \
485 @rm -rf *.gcda *.gcno syzygy/*.gcda syzygy/*.gcno bench.txt
488 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) icc-profile-clean
492 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
493 EXTRACXXFLAGS='-prof-gen=srcpos -prof_dir ./profdir' \
497 $(MAKE) ARCH=$(ARCH) COMP=$(COMP) \
498 EXTRACXXFLAGS='-prof_use -prof_dir ./profdir' \
502 @rm -rf profdir bench.txt
505 -@$(CXX) $(DEPENDFLAGS) -MM $(OBJS:.o=.cpp) > $@ 2> /dev/null